WVC-1600 Wireless Series R3 Micro Inverter User Manual

: June 3, 2024
: WVC

Table of Contents

WVC-1600 Wireless Series R3 Micro Inverter
IoT Monitoring Platform
- Smart mobile “core” life
MICRO INVERTER
Reset
Add device
Features
INTELLIGENT LOT MONITORING MODEM
- Number of data collectors per Modem
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WVC-1600 Wireless Series R3 Micro Inverter

IoT Monitoring Platform

Smart mobile “core” life

CO-2 induced environmental analysis
Daily and total energy generation in kWh
Actual DC input voltage, current and power
Actual AC output voltage, current and power
Inverter temperature
Historical (daily, weekly, monthly) power curve
Power losses due to weather induced effects
Optional limitation of power output
Online switch for the inverter start stop

WVC-1600-Wireless-Series-R3-Micro-Inverter-02

CO-2 induced environmental analysis
Daily and total energy generation in kWh
Actual DC input voltage, current and power
Actual AC output voltage, current and power
Inverter temperature
Optional limitation of power output
Online switch for the inverter start stop
Historical (daily, weekly, monthly) power curve

MICRO INVERTER

Model
Recommend use panels| WVC-1600
4*500Watt
---|---
Output voltage mode| 120/230V Auto switch
PV Open circuit voltage| 30-54VOC
Operating voltage range| 22-60V
Starting voltage range| 22-60V
short-circuit current

Maximum working current

| 4*18A

4*16A

Appearance and technical features

Temperature range -40°C to + 65°C
Size ( LxWxH) 370mmx300mmx41.6mm
Net amount 3.0kg
Waterproof grade lp65 NEMA3R
Heat dissipation mode Self-cooling
Communication mode 433MHz
Power transmission mode Reverse transmission. Load priority
Monitoring system APP
Electromagnetic Detection EN61000-6-1:2007 EN6100-6-3:2007 +Al:2011 + AC:2012
Power Grid standard EN50549-1, EN 50549-2, NBR 16149:2013, UL1741
Power grid detection IEC/EN 62109-1, IEC/EN 62109-2, !EC 62116, IEEE 1547
Certificate CE, ETL, Patented technology

Packing weight

Specifications Each ( Packing) Box ( 4PCS)
weight 4.0KG 16.5 KG
Size 430x375xl40mm 430x405x380mm

Detailed

WVC-1600-Wireless-Series-R3-Micro-Inverter-03 Description of the connector and cable core of the micro inverter Note: You can purchase a professionally customized AC bus with a T-type connector. Use this AC bus as the AC bus for each branch. Connect it hand in hand to form a modular micro-inverter branch wiring system.

LED indicator function of micro inverter

Red light keeps on ——-The equipment enters the preparatory working state;
Red light flashes ——-The device enters the delayed start-up stale;
Blue light flashes quickly —–MPPT maximum power point search status;
Blue light keeps on———1v,PPT maximum power point locked state;
Blue light turns to red light for a long time—-a) Island protection; b)Frequency protection; c)Fault; d) Software shutdown;

Normal working indicator flashing process
Connect the micro-inverter correctly to the AC and DC terminals and then power on:
The red light keeps on for 3 seconds ->the blue light flashes quickly (MPPT the red light flashes for 30 seconds -> maximum power point search) -> the blue light keeps on, (MPPT lock).

WVC-1600-Wireless-Series-R3-Micro-Inverter-05 Note

Connect the two communication antennas on the collector (Modem) as required;
Place the collector in an appropriate location to ensure that the WIFI signal source can be received normally and Form a good communication distance with the inverter;
The connected Wi-Fi network needs to be in 2.4G communication mode;
Please reset the collector for the first use;

Reset

Press and hold the reset button for more than 5 seconds, and Raday will go out and light up again after 5 seconds.
Release the button at this time, and the device will complete the reset.

Add device

Open the intelligent monitoring software “Cloud Intelligence” APP to log in Account, click the “+” icon in the upper right corner to start adding.
*If a device has been created under the current account,(You can click on the device icon below to enter the details page for query or operation) Entry equipment
When the smart APP changes to the QR code scanning state, scan the QR code label at the bottom of the Modem. At this time, the APP will automatically collect the body code of the Modem ,and automatically jump to the Wi-Fi connection page, and enter the current Wi-Fi Click Next after the password; Distribution network
Connect the Modem to the power supply as required, and quickly press the “Reset” button. When the “Raday” indicator turns from a long on state to a fast flashing state, the Modem will enter the network distribution state; Initialization
After comp leting the network configuration of the modem, return to the phone initialization device operation page, check the “I have completed the above operations” below and click the “start connection” button, then the page will jump to the signal search page and the Link on the modem The indicator light will become a fast flashing state. When a WIFI signal is found, the indicator light will flash slowly until the network configuration is completed , and the indicator light will return to a steady state. The page jumps to the completion page, please click “Finish” Add inverter
When the initialization is completed, please click the “Settings” menu in the upper right corner, find the inverter list item on the setting page, click the “Edit” button , and fill in the 8-digit code on the inverter to complete the inverter Add to.

Remarks

When multiple inverters need to be added, the in the English state,”,” comma separated and ended. Such as: 60001234, 6000E312,
Each Modem can monitor 60 inverters at the same time;3. A total of 2 lists, each list can be filled with 30 inverter codes;

Features

Smart APP can realize real-time data transmission with the cooperation of Alibaba Cloud lot Through graphs and graphic displays in time, users can understand the operation of the power station. The user can monitor the operation and adjust the output power function of the system.

WVC-1600-Wireless-Series-R3-Micro-Inverter-11