BLUESOUND BCS250 Passive Ceiling Speaker Owner’s Manual
- July 4, 2024
- BLUESOUND
Table of Contents
BLUESOUND BCS250 Passive Ceiling Speaker
Specifications
- Product Name: BCS250 Passive Ceiling Speaker
- Speaker Out Settings: 4/8 ohms, 70V, 100V
- Cut-out Hole Diameter: 6 inches (152 mm)
Product Usage Instructions
Identification of Parts
- Dogleg
- Tap Selector switch
Installation Guidelines
- Connect Phoenix Speaker connection block to BCS250
- Set B170S Speaker Out to desired setting (4/8 ohms, 70V, or 100V)
- Position BCS250 in-ceiling with a 6-inch cut-out hole
- Loosen dogleg by turning counterclockwise to unlock
- Tighten dogleg carefully (clockwise) – do not overtighten
- Repeat the above steps for the remaining doglegs
- Adjust the Tap Selector switch to the desired setting (Low Impedance or others)
WHAT’S IN THE BOX
Packed with your BCS250 you will find
- BCS250 speaker
- BCS round grille
- phoenix Speaker connection block
- Hook screw
- Quick Setup Guide
SAVE THE PACKAGING
Please save the box and all of the packaging in which your BCS250 arrived.
Should you move or otherwise need to transport your BCS250, this is by far the
safest container to do so. We’ve seen too many otherwise perfect components
damaged in transit for lack of a proper shipping carton, so please: Save that
box!
IDENTIFICATION OF PARTS
INSTALLATION GUIDELINES
Connect Phoenix Speaker connection block
IMPORTANT NOTES
• Compatible Bluesound Professional product is the B170S.
• Use Wiring gauge: 14-18 AWG.
• Follow speaker wire connections concerning the B170S Speaker Out setting.
B170S Speaker Out setting to 4Ω/8Ω, 70V
B170S Speaker Out setting to 100V
Position BCS250 in-ceiling
Loosen dogleg to unlock
Tighten dogleg. Be sure not to tighten too fast or too tight.
Repeat Steps 3 and 4 for the three other doglegs.
Adjust the Tap Selector switch to the desired setting
Install supplied grille
Grill Options
- BCS Round Grille White (supplied)
- BCS Round Grille Black (sold separately)
- BCS Square Grille White (sold separately)
- BCS Square Grille Black (sold separately)
©2024 BLUESOUND PROFESSIONAL, A DIVISION OF LENBROOK INDUSTRIES LIMITEDAll rights reserved. Bluesound and Bluesound logo are trademarks of Bluesound Professional, a division of Lenbrook Industries Limited part of this publication may be reproduced, stored, or transmitted in any form without the written permission of Bluesound Professional. BCS250 OM EN v05 – Mar 2024
FAQ
Q: What should I do if I lose the packaging for BCS250?
A: If you lose the original packaging for BCS250, it is recommended to use
a sturdy and appropriately sized box for transportation to prevent damage.
Q: How do I select the appropriate Speaker Out setting?
A: Depending on your system requirements, choose between 4/8 ohms, 70V, or
100V settings for the B170S Speaker Out.
Q: What is the purpose of the Tap Selector switch?
A: The Tap Selector switch is used to adjust impedance settings based on
your audio setup needs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>