dji Cellular Dongle 2 USB Modem User Guide
- July 4, 2024
- DJi
Table of Contents
dji Cellular Dongle 2 USB Modem
Specifications
- Product: Cellular Dongle 2
- Version: v1.0
- Supported SIM Card: Nano-SIM
- Antenna Ports: TS-5
- Connection: USB-C
Telecommunication Standards | TDD-LTE/FDD-LTE/WCDMA |
---|---|
Operating Frequency Bands | TDD-LTE: B34/38/39/40/41(194M) |
FDD-LTE: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/ B26/B28/B66/B71
WCDMA: B1/B2/B4/B5/B6/B8/B19
Interface| USB-C port, nano-SIM card slot, TS-5 antenna ports
Antennas| Dual antennas
Dimensions| 43.5×23.0×7.0 mm
Weight| Approx. 11.5 g
Operating Voltage/ Current| 5 V, 1 A
Operating Temperature| -30° to 65° C (-22° to 149° F)
Storage Temperature| -40° to 85° C (-40° to 185° F)
Product Usage Instructions
- SIM Card Slot Cover
- SIM Card Slot
- USB-C Port
- Status Indicator
- Antenna Ports
Disclaimer
Carefully read this entire document and all safe and lawful practices provided
before use.
Warning
- The DJITM Cellular Dongle 2 does not include a SIM card. Use a SIM card that is compatible with the product operating frequency and the chosen mobile network provider and select a mobile data plan according to the planned level of usage. You are responsible for these additional costs.
- The DJI Cellular Dongle 2 only supports nano-SIM cards.
- DO NOT touch the DJI Cellular Dongle 2 when it is in use as it may be hot.
- Small parts of this product and its accessories are dangerous if swallowed. Keep all parts out of reach of children.
- DO NOT connect this product to non-specified devices. Otherwise, the product may be damaged. Specified devices include Windows computers and compatible DJI devices. Refer to the manual documentation of the corresponding DJI device to learn more about the compatibility.
- This product and its related service are only available in some countries and regions. Comply with local laws and regulations and DJI Cellular Dongle Terms of Service.
Introduction
Supporting various communication standards and frequency bands, the DJI
Cellular Dongle 2 enables you to connect to the internet and transmit data
between devices through a mobile communication link when used with a nano-SIM
card.
Installation:
Installing the nano-SIM Card (Figure A) Open the SIM card slot cover on the
dongle, insert the nano-SIM card into the slot in the same direction as shown
in the figure, and close the cover.
Installing the nano-SIM Card (Figure A):
- Open the SIM card slot cover on the dongle.
- Insert the nano-SIM card into the slot following the direction shown in the figure.
- Close the cover securely.
Connecting the Antennas:
The dongle uses TS-5 antenna ports. Use antenna cables with TS-5 connectors
for connection. Connect the antenna cables to the antenna ports of the dongle
and firmly secure the cables. The dongle uses TS-5 antenna ports.
Follow these steps:
- Use antenna cables with TS-5 connectors for connection.
- Connect the antenna cables to the antenna ports of the dongle.
- Firmly secure the cables in place.
- Make sure that both antenna cables are firmly connected and the cable routing is tidy to avoid squeezing the wires. Otherwise, it may affect the transmission performance or the use of related functions.
- The cable clip should be mounted to secure the antenna cables when using certain devices. Refer to the relevant document of the corresponding device for more information.
Connecting to a Device:
The dongle can connect to a computer or compatible DJI devices. Connect the
USB-C port on the dongle to the corresponding port on a device using a
compatible cable according to the port.
- To connect the dongle to a device:
Connect the USB-C port on the dongle to the corresponding port on a computer or compatible DJI device using a compatible cable.
Status Indicator Descriptions:
The dongle will automatically power on when the connected device is powered
on. The status indicator indicates the current working status. Refer to the
table below for more information. The status indicator provides information
about the working status of the dongle:
Blinking Pattern | Description |
---|---|
Solid red | During startup or no nano-SIM card detected after startup. |
Solid green | Strong 4G signal in use. |
Blinks green slowly | Weak 4G signal in use. |
Blinks green quickly | 4G connection not established. Wait for |
establishment/restart
the device/move to a location with a strong signal.
Blinking Pattern| Description
---|---
Solid red| During startup or no nano-SIM card detected after startup.
Solid green| Strong 4G signal in use.
Blinks green slowly| Weak 4G signal in use.
Blinks green quickly| 4G connection not established. Wait for
establishment/restart the device/move the device to a location with strong
signal.
Solid blue| Strong 3G signal in use.
Blinks blue slowly| Weak 3G signal in use.
Blinks blue quickly| 3G connection not established. Wait for
establishment/restart
the device/move the device to a location with strong signal.
---|---
Blinks red| No network signal.
Compliance Information
ISED Compliance Notice
CAN ICES-003 (B) / NMB-003(B) This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator & your body.
EU & UK Compliance Notice
EU Compliance Statement: FIBOCOM WIRELESS
INC. hereby declares that this device (IG831T) is in compliance with the
essential requirements and other relevant provisions of the Directive
2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com
/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germany
Frequency Bands and Power
The maximum radio-frequency power transmitted in the frequency bands in which
the radio equipment operates: The maximum power for all bands is less than the
highest limit value specified in the related Harmonized Standard.
UMTS Band: 25 dBm
LTE Band: 25 dBm
CAUTION: The device could be used with a separation distance of 20cm to the human body.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycle valuable raw materials and the treatment of toxic substances.
Points de collecte sur www.quefairedemesdechets.fr
This content is subject to change.
Download the latest version from
https://www.dji.com/downloads
DJI is a trademark of DJI.
Copyright © 2024 DJI All Rights Reserved
FAQ
Q: What type of SIM card does the DJI Cellular Dongle 2 support?
A: The DJI Cellular Dongle 2 only supports nano-SIM cards.
Q: Can I connect the dongle to devices other than Windows computers and
compatible DJI devices?
A: No, connecting this product to non-specified devices may cause damage.
Ensure compatibility with Windows computers and compatible DJI devices.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>