MOFII M5AG Wireless Mouse User Manual
- July 4, 2024
- MOFII
Table of Contents
MOFII M5AG Wireless Mouse
Product installation:
Flip the power switch at the bottom of the mouse to the on position, take out the USB receiver at the bottom of the mouse, insert it into the USB port of the computer, open the battery cover at the bottom of the mouse, and put an M(No.5) battery into the battery bin (note that the positive and negative polarity of the battery must be correct). After powering on, the code can be used automatically
- left button
- right button
- Wheel button
- DPI
- battery warehouse
- receive (7)
- Battery cover
Note : There is a protective film on the footpad, please tear it off before use
Wireless mouse frequency: 2402 MHZ-2480MHZ
Wireless mouse channels: 40 (automatic frequency hopping)
Wireless working distance: S:10 meters (depending on the surrounding wireless
environment at work, If there are many wireless interference sources around,
the wireless operation distance may be shortened.) Wireless rated voltage:
1.5V Wireless rated current: ~15 mA Mouse sensing system: optical Mouse
resolution: 800/1200/1600 three levels adjustable (default 1200DP1)
Matters needing attention
Don’t put the optical mouse in mirror, glass surface or uneven surface is used, this will seriously affect the working effect of the mouse, the use of such wireless devices, please stay away from strong interference sources, such as: household microwave oven, etc., such as mouse found dirt, can use a small amount of anhydrous alcohol is wiped, must not put in liquid cleaning as a whole.
Restoring factory Setting (cde matching)
When you use the ,mouse the cursor does not move or the mouse does not work, please follow the following steps to restore the mouse to factory Settings
- If the product has been used for a period of time, the battery may be low. Replace the battery.
- ull out the receiver, insert it into the USB port, and set thepower toggle switch at the bottom of the mouse to the ON monitor so that the mouse cursor can move freely. The mouse has been restored to factory Settings.
Standard configuration (if the package is inconsistent with the content, please contact the dealer for replacement)
- Wireless mouse X1
- Receiver X1
- Battery (No.5) X1
- User manual X1
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment