muRata Type 2DT Evaluation Kit User Guide
- July 3, 2024
- muRata
Table of Contents
Quick Start Guide
Type 2DT Evaluation Kit
You can use this EVK for Type2DT communication test, power evaluation. Running
an application will need an external MCU
A complete Type2DT EVK User Guide can be found in our my Murata <Type2DT LoRa
Support Site> https://my.murata.com/web/lora_2dt
If you have any questions about the support site registration process, please
contact our local sales www.murata.com/en-
global/support/contactinformation
About Type2DT
- Module Size: 9.98 x 8.70 x 1.74 mm(max)
- Connectivity: LoRaWAN
- Interface: SPI/GPIOs
- Support Wi-Fi scan / GNSS scan
- Integrated TCXO & LNA
What Murata supply
- Type 2DT EVK
- Quick Start Guide
- Support Site Access Guide
- LoRa Antenna
- GNSS antenna
- Wi-Fi antenna
What customer need
- Host MCU board
- Windows® OS(XP,7,8,10)
- LoRa gateway connected to LoRa network server
How to connect
How to program Application
- Connect 2DT EVK to the Host MCU Board via Arduino connectors
- Connect all the Antennas to the SMA connector
- Connect Host MCU board to PC with Micro-AB USB cable
- Run STM32Cube Programmer tool on PC and choose ST-LINK interface Figure3: STM32Cube programmer Configuration Window
- Select the Firmware file to be programmed
- Select the programming options:
- Click on the “Start programming” button to start programming
Copyright © Murata Manufacturing Co., Ltd.
All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>