muRata LB1YA WLAN Module User Manual

: June 5, 2024
: muRata

Table of Contents

Operating temperature Range and Supply Voltage
Antenna information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual for FCC

Application Product Name: Communication Module
Application Type name: Type1YA, Type1YB

FCC ID:VPYLB1YA
Since this module is not sold to general end-users directly, there is no user manual for the module.
For the details about this module, please refer to the specification sheet for the module. This module should be installed in the host device according to the interface specification (installation procedure).

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with part 15 of FCC Rules. Part 15 Subpart C
The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance with any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.

Operating temperature Range and Supply Voltage

| min.| typ.| max.| unit
---|---|---|---|---
Operating Temperature Range| -10.| 25.| 60.| deg.0
16.0.| V
Supply Voltage| VCC| 10.04,| 14.0.,

Power Levels and Scan mode

mode	Rate	Channel	MAXIMUM TUNE-UP TOLERANCE [dBm]
IEEE 802.11b	1Mbps	1-11

10.5 ± 1.5
2Mbps|
| Other rates| | 13.0 ± 1.5
IEEE 802.11g| All Rates| 1-11| 13.0 ± 1.5
IEEE 802.11n(HT20 only)| All Rates| 1-11| 13.0 ± 1.5
Frequency of operation| Scan| Ad-hoc mode
---|---|---
2.4GHz| 11b/g/n (HT20)| 2412-2462MHz| Active| Yes

Antenna information

Antenna Product Name: Type1YA internal antenna
Antenna Type: Inverted F
Antenna Max Peak Gain: 1.6dBi @ 2400-2483.5MHz

●The host device that builds in this module must contain the following statement

Contains Transmitter Module FCC ID:VPYLB1YA or Contains FCC ID: VPYLB1YA

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host product due to the size, please describe it in the User’s manual of the host device.
●Please describe the following warning in the manual of the host device.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

●When installing it in mobile equipment. Please describe the following warning in the manual.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.

●When installing it in portable equipment. Please describe the following warning in the manual.
The available scientific evidence does not show that any health problems are associated with using low-power wireless devices. There is no proof, however, that these low-power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radiofrequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. 1MW has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.

It is necessary to take a SAR test with your set mounting this module. Class II permissive change application is necessary using the SAR report. Please contact Murata.
Note)
Portable equipment: Equipment for which the spaces between the human body and antenna are used within 20cm. Mobile equipment: Equipment used at the position in which the spaces between the human body and antenna exceeded 20cm.