muRata Type2GT EVK Evaluation Kit User Guide

June 1, 2024
muRata

muRata Type2GT EVK Evaluation Kit

muRata-Type2GT-EVK-Evaluation-Kit-PRODUCT

Product Information

Specifications:

  • Product   Name: Type2GT EVK
  • Usage: Communication test, power evaluation
  • External MCU Requirement: Yes
  • User Guide: Available at Murata’s Support Site

Product Usage Instructions

About Type2GT:
Type2GT is a communication test and power evaluation tool provided by Murata.

How to Connect:
Refer to Figure 1 for the setup of 2GT EVK + Host.

How to Program Application:
Use the ST-LINK interface for programming. Refer to Figure 3 for STM32Cube programmer Configuration Window.

What Customer Needs:
A server connection is required. See Figure 2 for connecting to the PC.

FAQ

Q: Where can I find the complete Type2GT EVK User Guide?
A: The complete user guide is available at Murata’s Support Site: here.

Q: How can I contact local sales for support site registration queries?
A: You can contact local sales through the following link: here.

You can use this EVK for Type2GT communication test, power evaluation. Running an application will need an external MCU A complete Type2GT EVK User Guide can be found in our my Murata https://my.murata.com/web/lora_2gt
If you have any questions about the support site registration process, please contact our local sales www.murata.com/en- global/support/contactinformation

About Type2GT

  • Module Size: 9.98 x 8.70 x 1.74 mm(max)
  • Connectivity: LoRaWAN
  • Interface: SPI/GPIOs
  • Support 2.4GHz / 2.1GHz S-Band
  • Integrated TCXO & RF switch

What Murata supply

  • Type 2GT EVK
  • Quick Start Guide
  • Support Site Access Guide
  • subGHz LoRa Antenna
  • 2.4GHz LoRa Antenna

What customer need

  • Host MCU board
  • Windows® OS(XP,7,8,10)
  • LoRa gateway connected to LoRa network server

How to connect

muRata-Type2GT-EVK-Evaluation-Kit-1

How to program Application

  • Connect 2GT EVK to the Host MCU Board via Arduino connectors
  • Connect all the Antennas to the SMA connector
  • Connect Host MCU board to PC with Micro-AB USB cable
  • Run STM32Cube Programmer tool on PC and choose ST-LINK interfacemuRata-Type2GT-EVK-Evaluation-Kit-2
  • Select the Firmware file to be programmed
  • Select the programming options:
  • Click on the “Start programming” button to start programming

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals