dji T30 Intelliigent Flight Battery User Guide
- July 3, 2024
- DJi
Table of Contents
dji T30 Intelliigent Flight Battery
Product Usage Instructions
- Press the power button to check the battery power level. Press and hold to power on the battery. Only power the battery on and off when connected to the aircraft to prevent damage to ports.
- The status LEDs indicate the battery level from left to right: LED 1, LED 2, LED 3, and LED 4.
- Use the handle to carry the battery and the clamp to attach it firmly to the aircraft. Press the clamp to remove the battery from the aircraft.
- Connects to an aircraft, battery station, or multifunctional inverter generator for charging.
- The rubber caps protect the battery from external elements.
Battery Functions
- Battery Level Display: Press the power button to check the current battery level.
- Communication: Transmit battery parameters to the aircraft for appropriate action based on changes.
- Charging Error Detection: Status LEDs indicate errors during charging; disconnect and wait for automatic error fix.
- Battery Error Records: Stores errors like excessive charging, discharging, temperature range issues, etc.; accessed by authorized DJI dealers for troubleshooting.
- Auto Balancing: Automatically balances cell voltages in certain situations.
- Auto Discharging: Discharges to maintain optimal charge levels if left fully charged for extended periods.
- Auto Current Adjustment: Intelligently adjusts charging current based on battery cell temperature and supports self-protection based on environment temperature.
FAQ
- Q: How do I know if my battery is fully charged?
- A: The status LEDs will indicate a full charge when all LEDs are lit up.
- Q: Can I use the T10 Intelligent Flight Battery with other DJI models?
- A: No, the T10 is specifically designed for DJI Agras T10 and may not be compatible with other models.
- Q: How should I store the battery when not in use?
- A: Store the battery in a cool, dry place at around 50% charge to prolong its lifespan.
Disclaimer
Congratulations on purchasing your new DJITM product. Read this entire
document and all safe and lawful practices DJI provided carefully before use.
Failure to read and follow instructions and warnings may result in serious
injury to yourself or others, damage to your DJI product, or damage to other
objects in the vicinity. By using this product, you hereby signify that you
have read this document carefully and that you understand and agree to abide
by all terms and conditions of this document and all relevant documents of
this product. You agree to only use this product for proper purposes. You
agree that you are solely responsible for your own conduct while using this
product and for any consequences thereof. DJI accepts no liability for damage,
injury, or any legal responsibility incurred directly or indirectly from the
use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and
its affiliated companies. Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks of their respective owner
companies. This product and document are copyrighted by DJI with all rights
reserved. No part of this product or document shall be reproduced in any form
without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the
sole discretion of DJI. For up-to-date product information, visit www.dji.com
and click on the product page for this product.
This document is available in various languages. In the event of divergence
among different versions, the English version shall prevail.
Read Before First Use
- The following terms are used in this document and on the warning labels on the product to indicate various levels of potential harm when operating this product:
CAUTION: Procedures which, if not properly followed, create a possibility
of physical property damage AND a small possibility of injury.
WARNING: Procedures which, if not properly followed, create the
probability of property damage, collateral damage, and serious injury OR a
high probability of superficial injury.
This product must be operated with caution and expertise. Failure to operate this product safely and responsibly could result in injury or damage to the product or other property. This product is not intended for use by those who are under 18 years old. DO NOT alter this product or use this product with incompatible components. This document contains instructions for safety, operation, and maintenance. It is essential to read and follow all of the instructions and warnings herein, before assembly, setup, or use, to operate the product correctly and avoid damage or serious injury.
Introduction
The T30 Intelligent Flight Battery applies to DJI AGRASTM T40/T30 and has a
capacity of 29000 mAh at a nominal voltage of 51.8 V, while the T10
Intelligent Flight Battery applies to DJI Agras T10 and has a capacity of 9500
mAh with the same voltage. The metal shell and rubber caps effectively protect
the battery, and the high-energy battery cells and the advanced power
management system provide long-lasting power to an aircraft.
The T10 Intelligent Flight Battery is used as an example below.
-
Power Button
Press to check the battery power level. Press and then press and hold to power on the battery. Only power the battery on and off when it is connected to the aircraft. Otherwise, the power ports on the battery and the aircraft will be damaged. -
Status LEDs
Indicate the battery level. From left to right: LED 1, LED 2, LED 3 and LED 4. -
Handle
Use the handle to carry the battery. -
Clamp
Use the clamp to firmly attach the battery to the aircraft. Press the clamp to remove the battery from the aircraft. -
Power Port
Connects to an aircraft, battery station, or multifunctional inverter generator. -
Rubber Caps
Protect the battery.
Battery Functions
- Battery Level Display: The status LEDs indicate the current battery level. Press the power button to check.
- Communication: Battery parameters including the voltage and power level are transmitted to the aircraft to enable the aircraft to take appropriate action when battery parameters change.
- Charging Error Detection: Errors that occur during charging are indicated by the status LEDs. When an error occurs, disconnect the battery and wait for the battery to fix the error automatically. For more information, refer to the LED Patterns section.
- Battery Error Records: The battery records errors such as excessive charging or discharging, exceeding the temperature range when charging and discharging, and storing a battery for an extended period with a power level outside of the recommended range. The battery error records can be accessed by authorized DJI dealers when troubleshooting or repairing.
- Auto Balancing: In certain situations, the battery automatically balances the voltages of the cells.
- Auto Discharging: If fully charged for more than one day, the battery automatically discharges to 97%. After 7 days, it automatically discharges to 60%.
- Auto Current Adjustment: When using with the provided battery station, the battery intelligently adjusts the charging current based on the temperature of the battery cell. The battery also supports self-protection based on the environmental temperature.
- Temperature Control: The battery ensures the temperature difference between the battery cells are the same and stay within the allowable temperature range.
- Refer to the safety requirements listed on the label of the battery before using for the first time. Users accept full responsibility for any violations of the safety requirements stated on the label.
- The product warranty is void if any battery errors occur due to misuse of the battery.
Using the Battery
Press and then press and hold the power button to power on the battery after
it is connected to the aircraft. When the aircraft lands and the motors stop,
press and then press and hold the power button to power off the battery, and
then disconnect the battery from the aircraft.
- DO NOT use or leave the battery near heat sources such as a furnace or heater. DO NOT leave the battery inside a vehicle on hot days.
- DO NOT allow the battery to come into contact with any liquid. DO NOT leave the battery near a source of moisture and DO NOT use the battery in humid environments. Otherwise, the battery may corrode, potentially resulting in the battery catching fire or exploding.
- DO NOT use swollen, leaking, or damaged batteries. If your battery is abnormal, contact an authorized DJI dealer for further assistance.
- Make sure the battery is powered off before connecting to or disconnecting from the aircraft. DO NOT connect or disconnect the battery while it is powered on. Otherwise, the power ports may be damaged.
- The battery should be used in the temperature range of -5° to 45° C (23° to 113° F). Use of batteries in environments above 50° C (122° F) can lead to fire or an explosion. Use of the battery in temperatures below -5° C (23° F) can negatively affect the performance of the battery. The battery can be used again when it returns to a normal temperature.
- DO NOT use the battery in strong electrostatic or electromagnetic environments or near high-voltage transmission lines. Otherwise, the battery circuit board may malfunction, which could cause a serious flight hazard.
- DO NOT disassemble or pierce a battery in any way or it may leak, catch fire, or explode.
- The electrolytes in the battery are highly corrosive. If any electrolytes make contact with your skin or eyes, immediately wash the affected area with water and see a doctor immediately.
- DO NOT use a battery that has been dropped. Dispose of the battery as described in the Battery Disposal section.
- If the battery falls into water while inserted in an aircraft during flight, take it out immediately, and put it in a safe and open area. DO NOT use the battery again and dispose of it properly as described in the Battery Disposal section.
- DO NOT put the battery in a microwave oven or a pressurized container.
- DO NOT place the battery on or near wires or other metal objects such as eyeglasses, watches, jewelry, and hairpins. Otherwise, the battery ports may be short-circuited.
- DO NOT drop or strike batteries. DO NOT place heavy objects on the batteries or station. Avoid dropping batteries.
- Always use a clean, dry cloth when cleaning the battery terminals.
- DO NOT fly when the battery power level is below 15%.
- Make sure the battery is correctly connected. Otherwise, the battery may overheat or even explode due to abnormal charging. Only use approved batteries from authorized dealers. DJI assumes no responsibility for any damage caused by using unapproved batteries.
- Make sure to lift the battery by the handle. DO NOT lift it by holding the cables.
- Make sure the battery is placed on a flat surface.
- DO NOT place anything on a battery. Otherwise, the battery may be damaged, which may lead to fire hazards.
- The battery is heavy. Be careful when moving the battery to avoid dropping it. If the battery is dropped and damaged, immediately leave the battery in an open area away from people. Wait 30 minutes and soak the battery in water for 24 hours. After making sure the power has completely run out, dispose of the battery per local laws.
- Make sure the battery is fully charged before each flight.
- Immediately land the aircraft if a critical battery level warning appears and replace it with a fully charged battery.
- Before operating in a low-temperature environment, make sure the battery is at least above 5° C (41° F). Ideally, above 20° C (68° F).
LED Patterns
The Battery Level Indicators will show the current battery level and status during charging and discharging. The indicators are defined below:
- LED is on
- LED is off
- LED is blinking
Checking Battery Level
If the battery is in power-saving mode, press the power button once to check
the current battery level.
LED Patterns During Charging
During charging, the LEDs blink in sequence to indicate the current battery
level. Disconnect the battery when charging is complete, and always use the
officially recommended charging device to charge the battery.
Battery Error LED Patterns
The table below shows battery protection mechanisms and corresponding LED
patterns.
In the event of charging temperature protection occurring the battery will resume charging once the temperature has returned to within the allowable range. If one of the other battery protection mechanisms activates, to resume charging once the issue has been resolved it is necessary to first press the Power button to turn the battery off, unplug the battery from the charging device, and then plug it back in to resume charging.
- DJI does not take any responsibility for damage caused by third-party charging devices.
- DO NOT charge the battery near flammable materials or on flammable surfaces such as carpet or wood. DO NOT leave the battery unattended during charging. There should be a distance of at least 30 cm between the battery station and any charging batteries. Otherwise, the battery station or charging batteries may be damaged by excessive heating and may even lead to a fire hazard.
- DO NOT charge the battery immediately after flight. The battery temperature may be too high and may cause serious damage to the battery. Allow the battery to cool down to close to room temperature before charging. Charge the battery at a temperature range of 0° to 60° C (32° to 140° F). The ideal charging temperature range is 22° to 28° C (72°to 82° F). Charging at the ideal temperature range can prolong battery life.
- In scenarios that meet the following two conditions simultaneously, the battery can be charged immediately after flight:
- The temperature of the flight environment was below 30° C.
- The temperature of the charging environment is below 30° C and there is no direct sunlight.
- DO NOT charge the battery near heat sources such as a furnace or heater.
- Regularly check the terminals and battery ports. DO NOT clean the battery using alcohol or other inflammable liquid. DO NOT use a damaged battery station.
- Keep the battery dry at all times.
- The battery stops charging when charging is complete. It is recommended to disconnect the battery once charging is complete.
- Make sure the battery is powered off before charging. Otherwise, the battery ports may be damaged.
Battery Storage
Disconnect the battery from the aircraft and check if there is any buildup in the battery port.
- Power off and disconnect the battery from the aircraft during transportation.
- Keep batteries out of the reach of children and animals. Seek professional medical support immediately if children swallow parts of the battery.
- If the battery level is critically low, charge the battery to a power level of 40% to 60%. DO NOT store a battery with a low power level for an extended period. Otherwise, the performance will be negatively affected.
- DO NOT leave the battery near heat sources such as a furnace or heater. DO NOT leave the battery inside a vehicle on hot days.
- The battery must be stored in a dry environment.
- DO NOT place the battery near explosive or hazardous material or near metal objects such as eyeglasses, watches, jewelry, and hairpins.
- DO NOT attempt to transport a battery that is damaged or has more than 30% power. Discharge the battery to 30% or lower before transportation.
- Make sure the battery is placed on a flat surface.
- If storing the battery for more than three months, it is recommended to store the battery in a battery safety bag in an environment at a temperature range from -20° to 40° C (-4°to 104° F).
- DO NOT store the battery for an extended period after fully discharging. Doing so may over-discharge the battery and cause irreparable damage to the battery cell.
- If a battery with a low power level has been stored for an extended period, the battery will be in deep hibernation mode. Charge to wake the battery.
- Disconnect the battery from the aircraft if you intend to store the battery for an extended period.
Battery Disposal
- Before disposing, make sure to soak the battery in water for 24 hours to completely discharge the battery. Dispose of the battery in specific recycling boxes. DO NOT place the battery in regular waste containers. Strictly follow your local regulations regarding the disposal and recycling of batteries.
- If the battery cannot be discharged completely, DO NOT dispose of the battery in a battery recycling box directly. Contact a professional battery recycling company for assistance.
Battery Maintenance
- DO NOT splash the battery with water. An excessive amount of water will damage the battery.
- DO NOT store the battery when the temperature is outside the range of -20° to 45° C (-4°to 113° F).
- If the battery is not used for an extended period, the battery life may be reduced.
- Fully charge and discharge the battery at least once every three months to ensure the performance of the battery.
- If a battery has not been charged or discharged for five months or more, the battery will no longer be covered by the warranty.
Specifications
Specifications| T30 Intelligent Flight Battery (BAX501-29000mAh-51.8V)| T10
Intelligent Flight Battery (BAX501-9500-51.8)
---|---|---
Nominal Voltage| 51.8 V
Battery Type| Lithium Battery 14S
Discharge Rate| 11.5 C
Operating Temperature Range| -5° C to 45° C (23° F to 113° F)
Charging Temperature Range| 0° C to 60° C (32° F to 113° F)
Warranty Details| 1,000 charge cycles or 12 months (whichever is sooner)
IP Rating| IP54 + Board-level potting protection
Compatible Aircraft| DJI Agras T40/T30| DJI Agras T10
Compatible Charging Device| T30 Intelligent Battery Station, D9000i
Multifunction Inverter Generator| T10 Intelligent Battery Station, D4500i
Multifunction Inverter Generator
Capacity| 29000 mAh| 9500 mAh
Energy| 1502 Wh| 430 Wh
Max Charging Power| 7200 W| 3600 W
Battery Charging Time*| 9-12 mins when the battery station is connected to two
AC power cables;
18-25 minutes when the battery station is connected to one AC power cable
| 7-10 mins
Weight| Approx. 10.2 kg| Approx. 3.8 kg
Tested in a lab environment at a temperature of 25° C (77° F) using a T30/T10 Intelligent Battery Station.
Compliance Information
- EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2006/66/EC,2014/30/EU A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance.
- EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
- GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device complies with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016.
- A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance.
WE ARE HERE FOR YOU
- Download the latest version from www.dji.com/t30 or www.dji.com/t10.
- This content is subject to change.
- If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>