SILENT ANGEL FX Ultra Low Noise Multi Channel Output Power Supply User Guide
- July 7, 2024
- SILENT ANGEL
Table of Contents
SILENT ANGEL FX Ultra Low Noise Multi Channel Output Power Supply User Guide
Package Contents
Front Panel
(1) Power Output Port Status Light (each light corresponds to each port on
the back)
When the power is connected and the power switch is turned on, the blue light
will light up.
When the port is not connected to a device and is in standby mode, the
corresponding light will turn blue.
When the port is connected to the device and outputs power normally, the
corresponding light will turn green.
If there is no power input or the power output switch is turned off, the light
will not light up.
Rear Panel
DC Power Cord Connection Method
To use a DC power cord, please first connect the DC power cord to the SENSE end of the FX device, and then connect the OUTPUT end Then connect the other end to the device you need to power
Note 1 : Please perform wiring with the power turned off.) (Note 2:
Please confirm whether the output voltage meets the equipment operating
voltage)
( Note 3 : If the wrong port is connected, the protection mechanism of the
device will be triggered. After the correct connection, you can restart the
device)
Connection Diagram
Product Functions and Parameters:
VOLTAGE LABELS Usage
-
Select the power cord you want to paste_
-
Tear off the voltage label corresponding to the voltage connected to the power cord and stick it to the input end of the
power cord (or other obvious location) -
The correct way to use labels is as follows:
Note: You must choose a voltage sticker that is the same as the voltage that the power cord is connected to to avoid damage to your device when connecting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>