Mous Qi2 Charging Stand User Manual
- July 3, 2024
- Mous
Table of Contents
Mous Qi2 Charging Stand
Specifications
- Model: XYZ-2000
- Dimensions: 10in x 5in x 3in
- Weight: 2 lbs
- Power Source: AC adapter (included)
- Material: Plastic
- Color: White
Product Information
The XYZ-2000 is a versatile household appliance designed tosimplify your
daily cooking tasks. With its compact size and user-friendly interface, this
product is suitable for both novice
and experienced cooks.
Product Usage Instructions
Setup :
Unpack the XYZ-2000 and place it on a flat, stable surface neara the power
outlet. Connect the AC adapter to the power port on the appliance and plug it
into the outlet.
Operation
Turn on the XYZ-2000 using the power button located on the control panel. Use
the menu buttons to navigate through the different cooking modes and
settings.
Cooking
Select your desired cooking mode and adjust the time and temperature
settings as needed. Place your ingredients in the appropriate cooking
compartment and close the lid securely.
Cleaning
Ensure the XYZ-2000 is unplugged before cleaning. Wipe the appliance with a
damp cloth after each use and remove any food residue from the cooking
compartments to maintain hygiene.
FAQ
Q: Can I cook multiple dishes simultaneously in the XYZ-2000?
A: Yes, you can cook multiple dishes simultaneously by using different
compartments of the appliance.
Instruction and Safety Booklet
Charging Pad with Qi2
Input: 5V 3A, 9V 3A, 12V 2.5A
Output: 15W Qi2 / 5W Pogo Connector
Before Use
- Please read this guide before using the product in order to ensure safe and proper use.
- Please consult your device packaging to determine whether this product is compatible with your device.
- Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.
Charging Pad with Qi2
What’s In The Box?
- A Charging Stand with Qi2
- BCharging Cable – Located Underneath
How To Set Up Your Charging Pad with Qi2
- Carefully remove the charging pad and the USB-C cable from the packaging
- Plug one end of the USB-C cable into the charging pad and the other end into a power adaptor that can deliver at least 30 watts of power for optimal performance. If you’re not sure about your adaptor’s power rating, please refer to its documentation or consult the manufacturer.
- Plug the power adaptor into an electrical outlet.
- Check that the LED on the charging pad flashes twice in a bright white colour. This confirms that the pad is powered and working correctly.
- Place your Qi2 enabled device on the Qi2 module of the charging pad. Once aligned correctly, you should feel a slight magnetic pull as the device snaps into place.
- Check that the LED on the charging pad remains white while your device is charging. This indicates that the charging pad and your device are properly connected and communicating _ with each other.
- Once your device is fully charged, the LED on the charging pad will turn off automatically.
- This indicates that your device is ready to use and can be safely removed from the charging pad.
Understanding The LED On Your Charging Pad with Qi2
- The LED on our Charging Pad with Qi2 provides important information about the charging status of your device. Here’s what you need to know:
- When connected to a power source via USB-C cable:
- A solid red light means the power source is less than 20W and the charger will not function properly.
- A white flash means the power source is between 20W and 30W and the pogo connector will not function properly.
- Two white flashes mean the power source is 30W or higher and the charger is fully functional.
- When your device is placed on the Qi2 module:
- The LED will turn solid white to indicate your device is charging.
- The LED will turn off once your device is fully charged.
- When the charging pad is in standby, no LED will appear.
- A continuous, rapid white flash indicates an unstable voltage and that the power source is of low quality. Try again with a different one.
- If the LED continuously flashes red, check that the device is Qi2-enabled and that there are no metal objects between the device and the charger.
How To Safely And Best Use Your Charging Pad with Qi2
- Ensure there are no metallic objects between the material top and your device as this may interfere with Qi2 charging. If the foreign object detector does not activate, the device has the potential to get very hot and burn the user or damage its surroundings.
- If you’re using an accessory with your phone case, for example a Mous® Card Wallet, please remove it as it may affect the charge performance.
- The magnetic array design ensures that you’ll receive a well optimised charge every time. Ensure the magnets snap to position, otherwise your mobile device may not charge properly.
- For best charging performance, we recommend you use a 30W power delivery wall adaptor.
- For best results, use with a Qi2 enabled phone or phone case.
- If you are not using a Qi2 enabled phone or phone case, you won’t be able to achieve proper alignment – you will need to ensure your phone is as central as possible to get the most efficient charge.
Important Safety Instructions –
Warning Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible.
- Do not place metat objects between phone and charger as the charger may get very hot.
- Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may reduce charge efficiency or reduce lifespan of the product.
- Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause explosion.
- This product is fitted with magnets. Pacemaker and ICD users are advised not to position the Charging Pad with Qi2 within 20cm radius of their implanted device as it may cause interference.
- Do not expose the Charging Pad with Qi2 to water. Exposure to water may result in short circuiting. If short circuiting occurs immediately turn off at the wall.
- Do not use the Charging Pad with Qi2 in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
- Do not disassemble this product or attempt to repurpose or modify it in any manner.
- Do not attempt to replace any part of this device. Any modification or disassemblement may result in a void of warranty.
- Use of a power supply or charger not recommended by Mous® may result in a risk of fire or injury to persons.
- If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
- All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Mous.
- Switch off the Charging Pad with Qi2 when not in use.
- To disconnect the Charging Pad with Qi2 from line voltage, pull the AC Adapter from the AC outlet.
- To comply with FCC RF exposure compliance requirements, the Charging Pad with Qi2 must be used with a separation distance of at least 20cm from all persons.
Legal
This product is meant for use only in conjunction with the appropriate device.
Please consult your device packaging to determine whether this product is
compatible with your particular device. Manufacturer is not responsible for
any damages to any device incurred through the use of this product.
Manufacturer shall not in any way be liable to you or to any third party for
any damages you or any third party may suffer as a result of use, intended or
unintended, or misuse of this product in conjunction with any device or
accessory other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any damages you or any
third party may suffer as a result of misuse of this product as outlined
above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless
for any claims or damages arising from unintended use or misuse, including use
with an unintended device. Mous® is a trademark of Mous Products Ltd. The Qi2
logo is a trademark of the Wireless Power Consortium. Apple® and MagSafe® are
trademarks of Apple Inc.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body. To comply with
the limits of the Class B digital device, pursuant to Part 15 of the FCC
Rules, this device must be used with certified peripherals and shielded
cables. All peripherals must be shielded and grounded. Operation with non-
certified peripherals or non-shielded cables may result in interference to
radio or reception.
FCC Statement of Compliance
Mous® declares that the radio equipment wireless charging base is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.mous.co
IC Statement
Radio Standards Specification RSS-Gen, issue 5. This device contains license-
exempt transmitters)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
- This device may not cause interference,
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC RF Exposure Statement
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 10cm between the radiator and your body.
WEEE Declaration
All of our products are marked with the WEEE symbol; this indicates that this
product must NOT be disposed of with other waste. Instead it is the user’s
responsibility to dispose of their waste electrical and electronic equipment
by handing it over to an approved re-processor, or by returning it to Mous®
for reprocessing. For more information about where you can send your waste
equipment for recycling, please visit www.mous.co
Warranty
At Mous®, we are dedicated to making high quality products that last. To give you peace of mind, this product is warranted for 2 years from the date of delivery. For full details regarding warranty terms and exclusions, please visit: www.mous.co/warranty. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase.
Customer Service
Need some extra help? Do get in touch with us at
www.mous.co/pages/help
Company Name: Sea&Mew Consulting GmbH
Address: Mittenhuber Straße 4, 92318 Neumarkt
Email: compliance.eu@outlook.com
Contact Person: Yuan Li
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>