Mous A791 MagSafe Compatible Wireless Power Bank Instruction Manual

June 13, 2024
Mous

Mous A791 MagSafe Compatible Wireless Power Bank Instruction Manual
Mous A791 MagSafe Compatible Wireless Power Bank

Before Use

  • Please read this guide before using the device in order to ensure safe and proper use. .Please consult your device packaging to determine whether this product is compatible with your device.
  • Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.

MagSafe Compatible Wireless Power Bank

What’s In The Box?
What's I The Box?

A: MagSafe Compatible Wireless Power Bank
B: USB-C Charging Cable

How To Set Up And Charge Your MagSafe Compatible Wireless Power Bank

  1. Carefully remove the power bank and the USB-C cable from the packaging. The power bank will arrive partly charged. It will need to be fully charged to deliver optimal charging capacity for your devices.
  2. Plug one end of a USB-C cable into the power bank, and the other end into a power adaptor that can deliver at least 20W of power for optimal performance. If you’re not sure about your adaptor’s power rating, please refer to its documentation or consult the manufacturer.
  3. Plug the power adaptor into an electrical outlet. 4. The far-left LED will turn green to indicate-it’s fast charging Please refer to the LED-guide in this booklet for more information on LEDs.
  4. Once the power bank is fully charged, all white LEDs will be on. You can now disconnect it from the cable and power adaptor to begin using it.

Charging Your Device Via The USB-C Connector

  1.  Connect the power bank to your device via the USB-C connector.
  2. The white LEDs keep you informed of the power bank’s capacity- they will fade as the battery charge decreases. Once the far-right LED flashes, your battery pack is almost out of charge.
  3. When all LEDs turn off, remove your device and connect the power bank to a power supply until it’s fully charged.

Understanding the LED Lights On Your MagSafe Compatible Wireless Power Bank

  • The four white LEDs will show the battery status. When the power bank is charging from a power supply, the far-left LED will flash. Once the battery pack is fully charged, the four white and one green LEDs will be lit.
  • The far-left LED will turn green when fast charging (9V or above), during re-charging of the battery and charging a device via USB-C.
  • The far-left LED will turn orange while wirelessly charging another device.
  • The far-left LED will flash orange if the power bank detects a foreign object. Remove any foreign objects from the device to resume charging.

All LEDs will flash five times if the power bank detects any of the following issues:

  • Over-heat detection
  • Over-current detection
  • Short-circuit detection

Important Points:

  • If you’re using an accessory with your phone case, for example a Mous Card Wallet, please remove it as it may affect the charge performance.
  • The magnetic array design ensures that you’ll receive a well optimised charge every time. Ensure the magnets snap to position, otherwise your mobile device may not charge properly.
  • For best charging performance, we recommend you use a 20W power delivery wall adaptor.
  • For best results, use with a MagSafe compatible phone or phone case.
  • If you are not using a MagSafe compatible phone or phone case, you won’t be able to achieve proper alignment – you will need to ensure your phone is as central as possible to get the most efficient charge.

Important Safety Instructions – Warning

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible.

  • Do not place metal objects between phone and charger as the charger may get very hot.
  • Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may reduce charge efficiency or reduce lifespan of the product. X Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause explosion.
  • This product is fitted with magnets. Pacemaker and ICD users are advised not to position the MagSafe Compatible Wireless Power Bank within 20cm radius of their implanted device as it may cause interference.
  • Do not expose the MagSafe Compatible Wireless Power Bank to water. Exposure to water may result in short circuiting. If short circuiting occurs immediately turn off at the wall.
  • Do not use the MagSafe Compatible Wireless Power Bank in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
  • Do not disassemble this product or attempt to repurpose or modify it in any manner.
  • Do not attempt to replace any part of this device. Any modification or disassemblement may result in a void of warranty.
  • Use of a power supply or charger not recommended by MousⓇ may result in a risk of fire or injury to persons.
  • If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
  • All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Mous.
  • Switch off the MagSafe Compatible Wireless Power Bank when not in use.
  • To disconnect the MagSafe Compatible Wireless Power Bank from line voltage, pull the AC Adapter from the AC outlet
  • The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warning

  1.  Do Not Crush.
  2. CAUTION: Risk of Fire, Burns and Explosion.
  3. Do not directly charge the internal battery.
  4. Do not replace the battery.

Legal

This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine whether this product is compatible with your particular device. Manufacturer is not responsible for any damages to any device incurred through the use of this product. Manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the appropriate device for which this product is designed. Manufacturer will not be responsible for any damages you or any third party may suffer as a result of misuse of this product as outlined above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse, including use with an unintended device. Mous” is a trademark of Mous Products Ltd. Apple and MagSafe are trademarks of Apple Inc.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.

Statement of Compliance

Mous declares that the radio equipment wireless charging base is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mous.co

Technology: WPT
Operating Frequency Range: UK EU only: 110-205kHz
Maximum field strength: 6.34 dBµA/m (@10m)
Manufacturer: Huizhou Tongyinhai Precision Electronics Ltd
Manufacturer address: No. 27, Xingwang street, Lilin town, Huicheng district, Huizhou city, Guangdong, China

IC Statement

Radio Standards Specification RSS-Gen, issue 5. This device contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  • This device may not cause interference,
  • This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Exposure Statement

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 0 mm surrounding the device and 0 mm above the top surface of the device.must be respected. –

WEEE Declaration

All of our products are marked with the WEEE symbol; this indicates that this product must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved re-processor, or by returning it to Mous for reprocessing. For more information about where you can send your waste equipment for recycling,
please visit www.mous.co

Warranty

At Mous®, we are dedicated to making high quality products that last. To give you peace of mind, this product is warranted for 1 year from the date of delivery. For full details regarding warranty terms and exclusions, please visit: www.mous.co/warranty. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase.

Customer Service

Need some extra help? Do get in touch with us at www.mous.co/pages/help

Company Name: Sea&Mew Consulting GmbH
Address: Mittenhuber Straße 4, 92318 Neumarkt
Email: compliance.eu@outlook.com Contact Person: Yuan Li

Please recyle responsibly.

| SUB-ASSEMBLY NUMBER: K0447 PART NUMBER: C0660-EC-000-SPA-ONL-01
---|---
FILE NAME| MPSPARKY-ECL-MULTI-LANGUAGE-001-V1-AW11
PART NAME| ELECTRICAL COMPLIANCE LEAFLET (ECL)
COMPATIBLE PRODUCTS| SPARKY
MATERIALS| 80gsm UNCOATED WHITE PAPER
OUTER DIMENSIONS| 84 x 84 x 4 mm
PRODUCT SIZE| NOT APPLICABLE

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals