Mous A-555 MagSafe Compatible Charging Mount Instructions

June 6, 2024
Mous

Instruction and Safety Booklet

MagSafe ® Compatible Charging Mount

Input : 5V-3A, 9V-2.2A, 12-V1.67A
Output : 5W / 7.5W / 10W / 15WMous A 555 MagSafe Compatible Charging
Munt - icon 1Mous A 555 MagSafe
Compatible Charging Munt - icon 2 FCC ID: 2AN72-A532
IC: 26279-A532
Model no: A-532, A-554, A-555

Before Use

  • Please read this guide before using the device in order to ensure safe and proper use.
  • Please consult your device packaging to determine whether this product is compatible with your device.
  • Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.

What’s In The Box?

Mous A 555 MagSafe Compatible Charging Mount

A MagSafe ® Compatible Charging Car Vent Mount
B USB-C Charge Cable

How To Set Up Your MagSafe Compatible Charging Car Vent Mount

  1. To use this product in your car, you will need a 5V/3A car power adaptor.
  2. Start by ensuring that your car vent is open and free from any obstructions.
  3. By twisting the thumbscrew anti-clockwise, open the vent clip on your vent mount.
  4. Place the vent clip onto one of the vent slats in your car’s vent.
  5. Only position the clip around one of the vent slats – this product works best on the bottom vent slats.
  6. Twisting the thumbscrew clockwise, close the vent clip securely and tightly onto the vent slat.
  7. Then connect the charging cable to your 5V/3A car power adaptor.

Before Use

  • Please read this guide before using the device in order to ensure safe and proper use.
  • Please consult your device packaging to determine whether this product is compatible with your device.
  • Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.

Mous A 555 MagSafe Compatible Charging Mount

A MagSafe ® Compatible Charging Car Vent Mount
B USB-C Charge Cable

How To Set Up Your MagSafe Compatible Charging Suction Mount

  1. Start by ensuring that you have access to a working electrical socket. If you’re using this product in a car, you will need a 5V/3A car power adaptor.
  2. Choose a smooth, flat surface upon which to attach your suction mount.
  3. With a dry cloth, wipe the surface to remove any oils or dust before beginning application.
  4. With the attachment lever up, place the suction cup against your chosen surface and firmly press the charger against the surface.
  5. Holding the charger with one hand, push the attachment lever towards the base of the charger.
  6. Once the suction cup is securely affixed, connect the charging cable to your chosen power adaptor.
  7. The white charging light indicates that your charger is connected and ready for use.
  8. Place your MagSafe-enabled phone against the charger and wait for the magnetic snap before releasing.
  9. If you are using a phone case, ensure that your case is MagSafe compatible before attempting use.

How To Safely And Best Use Your MagSafe Compatible Charger

  • Ensure there are no metallic objects between the material top and your phone as this may interfere with MagSafe compatible charging. If the foreign object detector does not activate, the device has the potential to get very hot and burn the user or damage its surroundings.
  • If you’re using an accessory with your phone case, for example, a Mous Card Wallet, please remove it as it may affect the charge performance.
  • The magnetic array design ensures that you’ll receive a well-optimized charge every time. Ensure magnets snap to a position otherwise, your mobile device may not charge properly.
  • For best charging performance, we recommend you use a 20W power delivery wall adapter.
  • For best results, use a MagSafe compatible phone or phone case.
  • If you are not using a MagSafe phone, you won’t be able to achieve proper alignment
    – you will need to ensure your phone is as central as possible to get the most efficient charge.

Important Safety Instructions – Warning

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible.

X Do not place metal objects between phone and charger as the charger may get very hot.
X Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may reduce charge efficiency or reduce the lifespan of the product.
X Do not place products in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause an explosion.
X This product is fitted with magnets. Pacemaker and ICD users are advised not to position the MagSafe Compatible Charger Mount within a 20km radius of their implanted device as it may cause interference.
X Do not expose the MagSafe Compatible Charger Mount to water. Exposure to water may result in short-circuiting. If short-circuiting occurs immediately turn off at the wall.
X Do not use the MagSafe Compatible Charger Mount in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
X Do not disassemble this product or attempt to repurpose or modify it in any manner.
X Do not attempt to replace any part of this device. Any modification or disassemblement may result in a void of warranty.
X Use of a power supply or charger not recommended by Mous may result in a risk of fire or injury to persons.
X If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold The manufacturer is harmless for any claims or damages arising from unintended use or misuse by a minor.
X All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odor, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Mous.
X Switch off the MagSafe Compatible Charger Mount when not in use.
X To disconnect the MagSafe Compatible Charger Mount from line voltage, pull the AC adapter from the AC outlet.
X To comply with FCC RF exposure compliance requirements, the MagSafe Compatible Charger Mount must be used with a separation distance of at least 20cm from all persons.

This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine whether this product is compatible with your particular device. The manufacturer is not responsible for any damages to any device incurred through the use of this product.
The manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the appropriate device for which this product is designed. The manufacturer will ot be responsible for any damages you or any third party may suffer as a result of misuse of this product as outlined above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse, including use with an unintended device. Mous and AutoAlignPlus are trademarks of Mous Products Ltd. Apple, AirPods and iPhone are trademarks of Apple Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K. All rights reserved.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
  • Consult the dealer or an experienced technician for help.

FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.
MODIFICATION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Statement of Compliance
Mous declares that the radio equipment wireless charging base is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mous.co
IC Statement
Radio Standards Specification RSS-Gen, issue 5 – English: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: – This device may not cause interference, – This device must accept any
interference, including interference that may cause undesired operation of the device.
RF Exposure Statement
The equipment complies with the IC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.

UKCA Warning
This device was tested for fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the wireless charger, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

UKCA The declaration of conformity is as follows
This device in compliance with the essential requirements and other relevant provisions of UK Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091). All essential radio test suites have been carried out.

Technology WPT
Operating frequency range 110-205kHz – For EU and UK only
Maximum field strength 4.8dBuA/m(@10m)
Manufacturer Shenzhen Power Technology Co., Ltd
Manufacturer address 201, 302, 401, BuildingA4, Block A,

FangxingScience&Tech.Park, No.13 of BaoNan Road,
Longgang Community, Longgang Street, Longgang District, Shenzhen

WEEE Declaration All of our products are marked with the WEEE symbol; this indicates that this product must NOT be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved re-processor, or by returning it to Mous for reprocessing. For more information about where you can send your waste equipment for recycling, please visit www.mous.co

Warranty

At Mous, we are dedicated to making high-quality products that last. To give you peace of mind, this product is warranted for 2 years from the date of delivery. For full details regarding warranty terms and exclusions, please visit: www.mous.co/warranty. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase.
Customer Service
Need some extra help? Do get in touch with us at www.mous.co/pages/help

    PLEASE RECYCLE
RESPONSIBLY.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals