Mous A448 Wireless Charging Instruction Manual

: June 5, 2024
: Mous

Table of Contents

What’s In The Box?
LED Indication Key
Important Safety Instructions – Warning
FCC Radiation Exposure Statement
Documents / Resources

AutoAlignPlus™ Wireless Charging (15W)
Instruction and Safety Booklet FCC ID: 2AN72-A448
IC: 26279-A448
Model no: A448, A471, A472

Wireless Charger Car Vent Mount (A471)
AutoAlignPlus™ Wireless Charging
Before Use

Please read this guide before using the device in order to ensure safe and proper use
Please consult your device packaging to determine whether this product is compatible with your device.
Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.

What’s In The Box?

A	Wireless Charger Car Vent Mount
B	18W USB-C out 12V car adapter
C	USB-C to USB-C charge cable (1.5m)

Mous A448 Wireless Charging - Material top How To Set Up Your Wireless Charger Car Vent Mount

Plug car adapter into car socket
Plug cable provided into car adapter
Attach Vent Mount to car vent
Orient the charging head to the desired angle by moving the Mous tab on the bottom of the charger.
Plug the other end of the cable into the charger, you will see two white ﬂashes from the LED, this indicates the product is on
Place your phone centrally onto the mount, the magnets will automatically align your phone to the mount and your phone will begin charging

How To Safely And Best Use Your Wireless Charger Car Vent Mount

If you’re using an accessory with your phone case, for example, a Mous Card Wallet, please remove it as it may affect the connection between your case and the amount and the charge performance
Limitless 3.0 contains magnets to allow perfect fast charging every time. Ensure magnets snap to a position otherwise your mobile the device may not charge properly
Ensure there are no metallic objects between the charging mount and your phone as this may interfere with the wireless charging
For best charging performance, we recommend you use the Mous supplied adapter and cable

Wireless Charger Suction Mount (A472)
AutoAlignPlus™ Wireless Charging
Before Use

Please read this guide before using the device in order to ensure safe and proper use
Please consult your device packaging to determine whether this product is compatible with your device.
Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.

What’s In The Box?

A	Wireless Charger Suction Mount
B	18W USB-C out 12V car adapter
C	USB-C to USB-C charge cable (1.5m)

Mous A448 Wireless Charging - Charging coil

How To Set Up Your Wireless Charger Suction Mount

Plug the car adapter into the car socket
Plug the cable provided into the car adapter
Lift the lever on the suction cup
Place the suction mount in the desired location against the windscreen
Lock the suction cup in place by pushing the lever down
Orient the charging head to the desired angle by moving the Mous tab and tightening the nut on the back of the head
Plug the other end of the cable into the charger. Two white ﬂashes from the LED indicate that the product is on
Place your phone onto the mount, the magnets will automatically align your phone to the mount and will begin charging

How To Safely And Best Use Your Wireless Charger Suction Mount

If you’re using an accessory with your phone case, for example, a Mous Card Wallet, please remove it as it may affect the connection between your case and the amount and the charge performance
Limitless 3.0 contains magnets to allow perfect fast charging every time. Ensure magnets snap to a position otherwise, your mobile device may not charge properly
Ensure there are no metallic objects between the charging mount and your phone as this may interfere with the wireless charging
For best charging performance, we recommend you use the Mous supplied adapter and cable

LED Indication Key

White LED ﬂashes twice: correct power has been plugged into the board
Solid white light: product is connected to the charger
No light: product on standby
Constant ﬂashing white LED light: input voltage instability/voltage stringing between circuits
• We recommend you unplug your charger
• Make sure you’re using the Mous adapter that came with your wireless charger
• If there’s still a problem when using the Mous adapter please contact us
Flashing red LED light: over voltage/low voltage/over current/over temperature/foreign object detection/circuit failure
• Please check for foreign objects and remove if found
• If this doesn’t solve the problem, unplug your charger and contact us

Important Safety Instructions – Warning

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, ﬁre or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible.

X Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may reduce charge efficiency or reduce the lifespan of the product.
X Do not place products in ﬁre or other excessively hot environments. Exposure to ﬁre or extremely high heat may cause an explosion.
X This product is ﬁtted with magnets. Pacemaker and ICD users are advised not to position the Limitless 3.0 Wireless Charger within 20 cm radius of their implanted device as it may cause interference.
X Do not expose the Wireless Charger to water. Exposure to water may result in short-circuiting. If short-circuiting occurs immediately turn off at the wall.
X Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of ﬁre or injury to persons.
X Do not disassemble this product or attempt to repurpose or modify it in any manner.
X Do not attempt to replace any part of this device. Any modiﬁcation or disassemblement may result in a void of warranty.
X Use of a power supply or charger not recommended by Mous may result in a risk of ﬁre or injury to persons.
X If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
X All products have gone through a thorough quality assurance inspection. If you ﬁnd that your device is excessively hot, is emitting odor, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact the Manufacturer.
X Switch off the wireless charger when not in use.
X To disconnect the charging pad from line voltage, pull the AC adapter from the AC outlet.
X To comply with FCC RF exposure compliance requirements, the wireless charger must be used with a separation distance of at least 20 cm from all persons.

Legal
This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine whether this product is compatible with your particular device. The manufacturer is not responsible for any damages to any device incurred through the use of this product.
The manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the appropriate device for which this product is designed. The manufacturer will not be responsible for any damages you or any third party may suffer as a result of misuse of this product as outlined above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse, including use with an unintended device. Mous and AutoAlignPlus are trademarks of Mous Products Ltd. Apple, AirPods and iPhone are trademarks of Apple Inc.
The trademark “iPhone” is used in Japan with a license from Aiphone K.K. All rights reserved.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certiﬁed peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certiﬁed peripherals or non-shielded cables may result in interference to radio or reception.
MODIFICATION: Any changes or modiﬁcations of this device could void the warranty.
Statement of Compliance
Mous declares that the radio equipment wireless charging base is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address: www.mous.co
IC Statement
Radio Standards Speciﬁcation RSS-Gen, issue 5 – English: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: – This device may not cause interference, – This device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Statement
The equipment complies with IC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
WEEE Declaration All of our products are marked with the WEEE symbol; this indicates that this product must NOT be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved re-processor, or by returning it to Mous for reprocessing. For more information about where you can send your waste equipment for recycling, please visit www.mous.co

Warranty
At Mous, we are dedicated to making high quality products that last. To give you peace of mind, this product is warranted for 2 years from the date of delivery. For full details regarding warranty terms and exclusions, please visit: www.mous.co/warranty.
This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase.
Customer Service
Need some extra help? Do get in touch with us at www.mous.co/pages/help

Please Recycle Booklet Responsibly