Mous A671 Elevated Apple Watch Charger User Guide

: June 10, 2024
: Mous

Mous A671 Elevated Apple Watch Charger

Before Use

Please read this guide before using the device in order to ensure safe and proper use.
Please consult your device packaging to determine whether this product is compatible with your device.
Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.

What’s In The Box?

A Elevated Apple Watch® Charger
B USB-C Charge Cabl ge Cable
C Silicone Support Pads

How To Set Up Your Elevated Apple Watch® Charger

Carefully remove the Elevated Apple Watch® Charger, the USB-C cable and the silicone support pad from the packaging.
Tear off the alignment guide provided and place it on top of the Elevated Apple Watch Charger.
Peel off the protective film from the silicone pad.
Use the alignment guide to attach the silicone pad in the correct position and press down to ensure it is securely attached.
Unravel the USB-C cable and connect it to a power adaptor and plug the power adaptor into an outlet.
Insert the USB-C cable into the Elevated Apple Watch Charger.
Lift the fast-charging module from the back and rotate it until vertical.
Place your Apple Watch on the silicone support pad to start charging in Nightstand Mode.
If you prefer not to charge your Apple Watch in Nightstand Mode, you can also lay it flat on the charging pad without needing to raise the fast-charging module. Simply place your Apple Watch directly onto the pad with the screen facing up to begin charging.

How To Connect Your Elevated Apple Watch® Charger Using The Pogo

Connector

Our Elevated Apple Watch® Charger comes with a manetic pogo connector that allows it to connect to our other charging devices with MagSafe®, including the Charging Pad with MagSafe and the Charging Station with MagSafe. Follow these instructions to use the pogo connector:

Position the Elevated Apple Watch Charger nearthe pogo pins on the Charging Pad with MagSafe or Charging Station with MagSafe.
Align the pogo connector on the Elevated Apple Watch Charger with the pogo pins on the other device.
The magnetic pogo connectors will pull the Elevated Apple Watch Charger into the right position.

How To Safely And Best Use Your Elevated Apple Watch® Charger

Ensure there are no metallic objects between the material top and your Apple Watch® as this may interfere with the charging. If the foreign object detector does not activate, the device has the potential to get very hot and burn the user or damage its surroundings.
The magnetic connection between the charger and your Apple Watch ensures that you’ll receive the fastest possible wireless charge every time.
For best charging performance, we recommend you use a power adaptor of 5W or more.
Designed for use with the Apple Watch range only. Do not use with any other smart watch.

These steps will ensure that your Elevated Apple Watch Charger is properly aligneand receiving powerfrom the other device. If the charger is connected by both pogo and USB-C, it will automatically select an input. If USB-C is removed, it will automatically switch inputs to use the pogo connector and vice versa, so you’ll never be without power.

Important Safety Instructions — Warning

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible.

Do not place metal objects between watch and charger as the charger may get very hot.
Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may reduce charge efficiency or reduce lifespan of the product.
Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause explosion.
This product is fitted with magnets. Pacemaker and ICD users are advised not to position the Elevated Apple Watch° Charger within 20cm radius of their implanted device as it may cause interference.
Do not expose the Elevated Apple Watch Charger to water. Exposure to water may result in short circuiting. If short circuiting occurs immediately turn off at the wall.
Do not use the Elevated Apple Watch Charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
Do not disassemble this product or attempt to repurpose or modify it in any manner.
Do not attempt to replace any part of this device. Any modification or disassembly may result in a void of warranty.
Use of a power supply or charger not recommended by Mous° may result in a risk of fire or injury to persons.
f this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Mous.
Switch off the Elevated Apple Watch Charger when not in use.
To disconnect the Elevated Apple Watch Charger from line voltage, pull the AC adapter from the AC outlet.
To comply with FCC RF exposure compliance requirements, the Elevated Apple Watch Charger must be used with a separation distance of at least 20cm from all persons.

Legal

This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine whether this product is compatible with your particular device. Manufacturer is not responsible for any damages to any device incurred through the use of this product. Manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the appropriate device for which this product is designed. Manufacturer will not be responsible for any damages you or any third party may suffer as a result of misuse of this product as outlined above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse, including use with an unintended device. Mous® is a trademark of Mous Products Ltd. Apple®, AirPods®, Apple Watch® and iPhone® are trademarks of Apple Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K. All rights reserved.

Made for Apple®

Use of the Made for Apple® badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Specifications

Input: 5V 1A
Output: 3W

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the deafer or an experienced technician for help.

FCC Radiation Exposure Statement

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.

IC Statement

Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

This device may not cause interference,
This device must accept any interference, including interference that may cause undesired operation of the device

IC RF Exposure Statement: The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.

CE Warning

This device was tested for fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the wireless charger, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union. The device complies with RF specifications when the device used at 20cm form your body.

CE Declaration of Conformity

Hereby, Mous® Products Ltd. declares that the product type A671 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mous.co

UKCA Declaration of conformity

Hereby, Mous Products Ltd. declares that product type A671 in compliance with regulations: UK Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); UK Electromagnetic Compatibility Regulations (SI 2016/1091); The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address: www.mous.co. All essential radio test suites have been carried out.
To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.

Technology	WPT
Operating Frequency Range	326.5kHz
Maximum field strength	-20.24dBuA/mP10m
Manufacturer	Shenzhen Powerqi Technology Co., Ltd
Manufacturer address	201, 302, 401, BuildingA4, Block A, Fangxing

Science&Tech.Park, No.13 of BaoNan Road,

Longgang Community, Longgang Street,

Longgang District, Shenzhen

WEEE Declaration

All of our products are marked with the WEEE symbol; this indicates that this product must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved re-processor, or by returning it to Mous® for reprocessing. For more information about where you can send your waste equipment for recycling, please visit www.mous.co.

Warranty

At Mous , we are dedicated to making high quality products that last. To give you peace of mind, this product is warranted for 2 years from the date of delivery. For full details regarding warranty terms and exclusions, please visit: www.mous.co/warranty. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase.

Application address: IC
WeWork Keltan House, 115 Mare Street, London, E8 4RU, United Kingdom
Application Address: FCC, CE, UKCA
WeWork Senna Building, Gorsuch Place, London, E2 8JF, United Kingdom