Mous A669 Charging Pad with MagSafe Instructions

Mous A669 Charging Pad with MagSafe Instructions

Charging Pad with MagSafe

Before Use

• Please read this guide before using the device in order to ensure safe and proper use.
• Please consult your device packaging to determine whether this product is compatible with your device.
• Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information.

What’s In The Box?

How To Set Up Your Charging Pad with MagSafe®

1. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
2. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
3. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
4. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
5. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
6. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
7.  Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh.

How To Safely And Best Use Your Charging Pad with MagSafe®

•  Ensure there are no metallic objects between the material top and your phone as this may interfere with MagSafe compatible charging. If the foreign object detector does not activate, the device has the potential to get very hot and burn the user or damage its surroundings.
• If you’re using an accessory with your phone case, for example a Mous® Card Wallet, please remove it as it may affect the charge performance.
• The magnetic array design ensures that you’ll receive a well optimised charge every time. Ensure magnets snap to position otherwise your mobile device may not charge properly.
• For best charging performance, we recommend you use a 20W power delivery wall adapter.
• For best results, use with a MagSafe® compatible phone or phone case.
• If you are not using a MagSafe phone, you won’t be able to achieve proper alignment
• you will need to ensure your phone is as central as possible to get the most effcient charge.

Important Safety Instructions – Warning

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible.

• Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high
• heat may cause explosion.
• This product is fitted with magnets. Pacemaker and ICD users are advised not to position the MagSafe®
• Compatible Charger Mount within 20cm radius of their implanted device as it may cause interference.
• Do not expose the MagSafe® Compatible Charger Mount to water. Exposure to water may result in
• short circuiting. If short circuiting occurs immediately turn o at the wall.
• Do not use the MagSafe Compatible Charger Mount in excess of its output rating. Overloading
• outputs above rating may result in a risk of fire or injury to persons.
• Do not disassemble this product or attempt to repurpose or modify it in any manner.
• Do not attempt to replace any part of this device. Any modification or dis assemblement may result in a
• void of warranty.
• Use of a power supply or charger not recommended by Mous® may result in a risk of fire or injury
• to persons.
• If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely
• responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend,
• indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or
• misuse by a minor.
• All products have gone through a thorough quality assurance inspection. If you find that your device is
• excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an
• abnormal phenomenon, immediately stop all product use and contact Mous.
• Switch off the MagSafe Compatible Charger Mount when not in use.
• To disconnect the MagSafe Compatible Charger Mount from line voltage, pull the AC adapter from
• the AC outlet.
• To comply with FCC RF exposure compliance requirements, the MagSafe Compatible Charger Mount
• must be used with a separation distance of at least 20cm from all persons.

Legal

This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine whether this product is compatible with your particular device. Manufacturer is not responsible for any damages to any device incurred through the use of this product. Manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the appropriate device for which this product is designed. Manufacturer will not be responsible for any damages you or any third party may suffer as a result of misuse of this product as outlined above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse, including use with an unintended device. Mous® and AutoAlignPlusTM are trademarks of Mous Products Ltd. Apple®, AirPods® and iPhone® are trademarks of Apple® Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K. All rights reserved.

Made for Apple®

Use of the Made for Apple® badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

FCC Radiation Exposure Statement

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non- certified peripherals or non-shielded cables may result in interference to radio or reception.

IC Statement

Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference,
• This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Exposure Statement

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.

CE Warning

This device was tested for fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the wireless charger, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union. The device complies with RF specifications when the device used at 20cm form your body.

CE Declaration of Conformity

Hereby, Mous® Products Ltd declares that the product type A669 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mous.co

UKCA Declaration of conformity

Hereby, Mous Products Ltd declares that product type A669 in compliance with directives: UK Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); UK Electromagnetic Compatibility Regulations (SI 2016/1091); The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address: www.mous.co. All essential radio test suites have been carried out. To comply with RF exposure requirements, a minimum separation distance of20cm must be maintained between the user’s body and the product.

dBuA/m(@10m)
Manufacturer| Shenzhen Powerqi Technology Co., Ltd
Manufacturer address| 201, 302, 401, BuildingA4, Block A, Fangxing Science&Tech.Park, No.13 of BaoNan Road, Longgang Community, Longgang Street, Longgang District, Shenzhen

WEEE Declaration

All of our products are marked with the WEEE symbol; this indicates that this product must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved re-processor, or byr eturning it to Mous® for reprocessing. For more information about where you can send your waste equipment for recycling, please visit www.mous.co.

Warranty

At Mous®, we are dedicated to making high quality products that last. To give you peace of mind, this product is warranted for 2 years from the date of delivery. For full details regarding warranty terms and exclusions, please visit: www.mous.co/warranty. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase.

Applicant Address: IC

New Kings Court, Eastleigh, SO53 3LG, United Kingdom

Applicant Address: FCC, CE, UKCA

WeWork Senna Building, Gorsuch Place, London, E2 8JF, United Kingdom

Customer Service

Need some extra help? Do get in touch with us at www.mous.co/pages/help

| PART NUMBER: XXXX-XX-XXX-XXX-XXX-XX
---|---
FILE NAME| MP_MOATIS-SINGLE-BOOKLET_C01-V2-AW1
PART NAME| BOOKLET
COMPATIBLE PRODUCTS| MOATIS
MATERIALS| 120GSM UNCOATED WHITE PAPER
OUTER DIMENSIONS| 84 x 84 x 2 mm
PRODUCT SIZE| NOT APPLICABLE

CUT LINE:
CREASE LINE:
REGISTRATION MARKS:
BLEED LINE:
GLUE AREA:
ANNOTATIONS:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>