morphy richards BREEZE Steam Iron User Manual

RN300291 MUK Rev1 Steam Iron

BREEZE Steam Iron

Please read and keep these instructions for future use

IMPORTANT: To reduce limescale damage we recommend the. use of distilled, deionised: or demineralised: water. This is particularly important: if you live in a-hard.
Never use battery topping up fluid or water containing any substances like starch, sugar, fragrant additives or defrosted water from refrigerator,
Failure to maintain your iron will invalidate your guarantee.
” For competitions, product hints and tips and more join us at
www.morpnyrichards.co.un/blog
www.facebook.com/morphyrichardsuk
@loveyourmorphy

www.morphyrichards.com

• Register online for your 3 year guarantee. See the back of this instruction book for details. (UK and lreland customers only)

Important safety instructions

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• WARNING: Misuse of the appliance could cause personal injury.
• Keep the iron and its cord out of reach of children less than 8 years of age at all times.
• The iron must not be left unattended while it is connected to the supply mains.
• The plug must be removed from the socket before filling the iron with water.
• The iron must be used and rested on a stable surface.
• Do not operate with a damaged supply cord or grommet, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
• When placing the iron on its heel, ensure that the surface on which the heel is placed is stable.
• The iron is not to be used if it has been dropped, if there are visible signs of damage or it is leaking.
• The filling aperture must not be opened during use.

CAUTION – HOT: Burns can occur from touching hot parts, hot water or steam.
WARNING: To avoid electric shock, do not immerse appliance in water / liquid.
Electrical requirements and mains cable

• Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating current).
• Do not let the mains lead come into contact with the hot soleptate of the iron.
• Should the fuse in the mains plug require changing,
• 13 amp BS1362 fuse must be fitted.
• WARNING: This appliance must be earthed.

PLEASE READ ALL INSTRUCTIONS AND KEEP FOR REFERENCE

Steam iron overview

1. Varlable steam switch.
2. Water spray button
3. Steam boost button
4. Auto shut-off indicator (certain models only)
5. Self. clean position
6. Filling hole with cap
7. Spray nozzle
8. Solepiate
9. Temperature dial
10. Temperature indicator light
11. Water tank
12. Iron heel

Temperature guide

Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International Textile Care Labelling Code

Before use

Remove any protective cover from the soleplate (8).

Using the iron for steam ironing

Make sure the iron is not plugged In. Set the variable steam switch (1) to ‘O’. Fill the water tank (11) via the filling hole (6). The MAX graphic on the side of the water tank has two positions, allowing the tank to be filted in either a horizontal or titted position. To fill the tank with the maximum amount of water, we recommend the iron is tilted whilst being filled.
WE RECOMMEND THE USE OF DISTILLED, DEIONISED OR DEMINERALISED WATER.
Never use battery topping up ftuid or water. containing any substances like starch, sugar, fragrant additives or defrosted water from a refrigerator.
NOTE: Please see point 2 of ‘Exclusions’ on page 8.

Plug in the iron and switch ‘on at the mains.
Set the temperature dial (9} to the ternperature required (see ‘Ternperature Guide’ on page 3).
The temperature indicator light (10) wil iltumninate until the required temperature is reached, then it will turn off.
Tip: We recommend the temperature indicator light is allowed to illuminate and extinguish twice before you begin ironing.
The temperature indicator light will switch on and off whilst you are ironing.
Tip: Begin with cool fabrics and work up to higher settings. An iron heats up quicker than it cools dewn so this will save you time and energy.

Vary the’steam output using the vanable steam switch (1).
Only use the steam function on heavy fabrics and when  the temperature dial is set within the shaded area (as shown, right).

For stubborn creases, use the water spray button (2).
If using for. the first time,-you may need to press. this’a few times to prime the pump. : :

Steam boost

Press the steam boost button (3) for an extra steam burst for stubbom creases / heavy fabrics.
NOTE: if you need to use the steam boost whilst dry ironing, check the temperature dial (9) is set within the steam range.
NOTE: For optimum steam quality, do not operate the shot more than three times in succession.

Features of your iron

Dry ironing
Your iron can be used for dry ironing. Set the variable steam switch (1} to ‘0’ and set the temperature dial (9) as desired (see page 3).
You won’t need water in the tank unless using the water spray or steam boost features.
Vertical steam
Vertical steam is useful for removing creases from hanging clothes, curtains, etc. Hold the iron ‘between 1cm and 2em away from the item and press the steam boost button (3).

Anti-drip system
This. prevents water escaping from the soleptate (8) when the iron is too cold.
During use, the anti-drip system may emit a loud click, particularly during heat-up or whist cooling down. This is perfectly normal and indicates that the system is functioning correctly.
Anti-scale system
This system reduces scale deposits and helps Protong the lite ot the iran.
Auto shut-off (Easy Reach+ only)
The iron will automatically shut down if stationary in the horizontal position for + minute, or in the vertical position for 8 minutes.

When auto shut-off is activated, the indicator light (4) will flash.
Gently move the iron and it will reheat. Wait for the iron to heat-up and continue ironing.

Maintenance

To clean a stainless steel soleplate
We recommend using a generally available gentle chrome, silver or stainless steel cleaner. Always follow the manufacturer’s instructions.
If any man-made fibres fuse to the soleplate (8), set the iron at the 3-dot position and pass it over a clean piece of cotton to draw the deposit off the surface.
To clean a coated soleplate
Do not use scouring powder or solution as this could cause damage to the coating.
If any man-made fibres fuse to the solepiate (8), set the ivon at the MAX position and pass il over a clean piece of cotton to draw the deposit off the surtace.
To clean the exterior
Allow the unit to cool and wipe over with a damp cloth and mild detergent, then wipe dry.

Emptying and storing

When you have finished ironing, unplug and empty all water from your iron and set the steam switch at the ‘O’ position. When cool, store the iron on its heel with the cord wrapped loosely around the heei.
NOTE: Please see point 4 of ‘Exclusions’ on page 8.

Easy Store models feature a clip to neatly secure the plug to the cord.

Self clean

Your iron has a built in cleaning system designed to keep the water valve, steam charnber and steam vents clear of lint and loose mineral deposits.

1. Half fill the iron with water.

2. Place the iron on its heel (12).

3. Move the varlable steam switch. (4) to the MAX position.

4. Connect to a mains supply ourlet.

5. Set the temperature dial (9) 0 ‘MAX’, See step 2 of “Using yeur iran for steam iraning’ an pag2 4.

6. Leave the iron switched on, rested 071 its heel (42) untit the temperature indicator light {tO} goes out.
   WARNING: Keep hands and body away from the hot solepiate.

7. Disconnect the iron from the mains supply outlet.

8. Whilst the iron Is still very hat, hold the iron harizontally aver a sink.
   CAUTION: The soleplate will stiff be hot, co ensure the power cord and plug are kept avray from it and the sink.

9. Push the variable steam switch (1) fully to the right and hold in the sel! cet position (5), WARNING: Steam andi boiling hot water will drain from the hales in the solepiate. Keen hands and body away from the hat water. This washes aveay the scale and minerals that have built up inside the steam chamber

10. Whilst stili hoteiing the variable stream switch (2) in the self clean position, gently move the iran back and forth urtil the water tank is errzty.

11. When cleaning is complete. move the variable steam switch back to the ‘0’ paslticn,

12. Rest your steam iron back an its neet and allow to fully cool down.

13. Vine the soleplale (8) wich a cold, damp cloth, After this cleaning operation, enpty out any remaining warer.
    IMPORTANT: Do not attempt to descale the soleplate with descaling prociucts.

Contact us

Helpline
If you are having a problem with your appliance, Please call our Helpline, as we are more likely to be able to help than the store you purchased the item from. Please have the product name, model number and serial number to hand when you call to help us deal with your enquiry quicker.
UK Helpline: 0344 871 0944
IRE Heipline: 1800 409 119
Spares: 0344 873 0710
Talk to us
If you have any questions or comments, or want some great tips to help you get the most out of your products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
‘Twitter: @loveyourmorphy
Website: www.morphyrichards.com

Notes

Registering your 3 year guarantee

Your standard 1 year guarantee is extended for an additional 2 years when you register the product within 28 days of purchase with Morphy Alichards. If you do not register the product with Morphy Richards within 28 days, your product is guaranteed for 1 year. To validate your 3 year guarantee register with us online at www.morphyrichards.co.uk Or call our custamer registration line
UK 0344 871 0242
IRE 1800 409 119
N.B. Each qualifying product needs to be registered with Morphy Richards individually.
Please note that the 3 year quarantee is only available in the UK and Ireland. Please refer to the 1 year guarantee for more information.

Your 1 year guarantee
It Is important to retain the retailer’s receipt as proof of purchase. Staple your receipt to this back cover for future reference.
Please quote the foltowing information if the product develops a fault. These numbers can be found on the base of the product.
Modet no,
Serial no.
All Morphy Aichards products are individually tested before Jeaving the factory. In the uniikely event of any appliance proving to be fauity within 28 days of purchase, it shoutd be returned to the place of purchase for it to be replaced.
If the fauit develops after 28 days and within 12 months of original purchase, you should contact the Heipiine number quoting Model number and Serial number on the product, or write to Morphy Richards at the address shown.
You may be asked to return @ copy of proof of purchase.
Subject to the exclusions set out below (see Exclusions), the faulty appliance will then be repaired or replaced as appropriate and dispatched usually within 7 working days of receipt.
lf, for any reason, this itern is replaced ar repaired during the 1 year guarantee period, the guarantee on the new item will be calculated from original purchase date.
Therefore it is vital to retain your original till receipt or invoice to indicate the date of initial purchase.
To qualify for the 1 year guarantee, the appliance must have been used according to the instructions supplied.
For example, water should be emptied after each use.

Exclusions

Morphy Richards snail not be liadle to raplace or repair the goods under the terms of the guarantae where:

1. The fault has been caused or is attributable to accidental use, misuse, negligent use or used contrary to the manufacturer’s recommendations or where the fauvit has been caused by power surges or damage caused in transit.
2. The fault has been caused by using water other than that recommended by Morphy Ricnards.
3. The fautt is caused by limescale butid-up.
4. The cables are damaged due to wrapping too tight’y or excess.ve kinking.
5. The appliance has been used on a4 voitage supply other thar that stamped on the products.
6. Repairs have been attempted oy persons other than our service staff {or authorised dea er).
7. The appliance has been used for hire purposes or non dornestic use.
8. The appiiance is second hand.
9. Morphy Richards reserves the right not to carry out any type of servicing under the guarantee at its discretion.

« This guarantee does not corter any rights other than those expressly set out above and does not cover any claims for consequential boss or damage. This guaraniee is offered as an acditional benefit and does not affect your statutory rights ase consumer, Morphy Richards products are.

Disclaimer

Intended for household use only, See usage liritations within the location safety Instructions.
Morphy Richards has a policy of continuous improvement in product quality and design. The company, therefore reserves the right to change the specification of its models at any time.
For electrical products solid within the European Cornmunity, At the end of the electrical products useful life, it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your focal Authority or retailer for recycling advice in your country

IF YOU ARE HAVING A PROBLEM WITH ONE OF OUR PRODUCTS, CALL OUR HELPLINE:
UK: 0344 871 0944
EIRE: 1800 409 119
SPARES: 0344 873 0710

The After Sales Division
Morphy Richards Ltd
Mexborough,
South Yorkshire,
England, S64 8AJ
www.morphyrichards.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>