E-Yooso E-787 Wireless Keyboard User Manual

E-Yooso E-787 Wireless Keyboard

Product Feature

• IR 2.4G light wireless tracing connection, technology, work operating with range many 10 of surfacemeters.
• 3 switchable DPI 1000/1600/2400 settings. .
• Ergonomic design.
• Compatibility with
• Plug & play Nano receiving Windows/Mac adapter. operating system.

Before use

1. Find the wireless mouse and keyboard and one Nano receiver in the box. Please note that nano receiver is placed into inne box.
2. Plug the Nano receiver into the USB port on the computer.
3. Install 1x AA battery into the Mouse, install 1x AA batteries into the keyboard.
4. The LED indicator on the mouse and keyboard will flash for a few seconds, and indicate that the products are now working.

Product specification

1. DPI adjustable function
   3 level DPI 1000/1600/2400, press the DPI key, available to switch between the three gears till you like. During the switching process, twice for 1 OOODPI. twice times for 1600DPI, three times for 2400DPI.

2. Polling rate regulation
   Click the the same middle time for button 3s and and the the right polling button rate will change between 125Hz and 250Hz. When it comes to 125Hz, the LED will slowly flash three times: when it comes to 250Hz, the LED will quickly flash three times.

3. Low PQWer alami function
   The LED indicator on keyboard and the mouse will be flash in RED when the battery is going to out of work, please replace new battery in time.

4. Automatic sleep
   If you do not use the mouse after stopping, the mouse will enter the hibernation state. You can wake it up by pressing the button or moving the mouse ( press the button to wake it up after stopping for about 15 minutes).

5. Keyboard :FN key function
   Press functions. FN + F1~F12 for multi-media

6. Reprogramming the devices
   Keyboard and Mouse and receiver need to reconnect under the condition of High temperature, high magnetic, strong vibrate Power outages.
   Mouse connection:

7. Plug the Nano receiver into the USB port.

8. Mouse within 30CM to Nano receiver, reinstall the battery, Press the left, center and right keys at the same Your time.

9. Your mouse should now be synced.

Keyboard connection

1. Plug the Nano receiver into the USB port.
2. Press and hold the ESC key and +/= key for 3 seconds.
3. The Keyboard will be ready once the LED flashes for 3 seconds

Caution
This mouse uses 2.4GHz radio waves to transmit data with a working distance of 1 Om. Ensure that there are no large objects between the mouse and the Nano receiver

Tip: Remove the battery if the mouse Is not going to be used for long periods of time.

Remark
This equipment complies with Class B rules in digital apparatus and complies with Part 15 of the FCC Rules.

Warranty

The warranty period of our products is 12 months from purchase.If a defective is found due to qualified problems of the product, please contact us;
Service Email: Eyoososervice@163.com

Package content

• Wireless  Mouse
• Nano Receiver
• Wireless Keyboard
• User Manual

Add: Building D,Nan An Industrial Area, Youganpu Village, Fenggang Town, Dongguan City, Guangdong, China TEL:86-769-86800666 Fax:86-769-86800338 Service Phone Number:400-865-9898 Welcome to Address: www.eyspc.cn

BATTERY SAFETY GUIDELINES

• DO NOT replace the battery with a different model.
• DO NOT use this product if the battery shows signs of damage including, but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
• DO NOT touch the battery fi material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
• DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating condition.
• DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
• DO NOT impact, bend, alter, disassemble, or otherwise damage the battery as the contents are volatile, hazardous, and can be harmful

CAUTION: Failing to follow all safety guidelines may result product damage, explosion, fire, and/or electric shock.

FCC WARNING STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>