E-YOOSO E-777 2.4Ghz Wireless Keyboard and Mouse Combo User Guide
- June 6, 2024
- E-YOOSO
Table of Contents
E-YOOSO®
Quick Start Guide
Model: E-777
2.4Ghz Wireless Keyboard and Mouse Combo
Product Feature
- 2.4G wireless connection, operating range 10 meters.
- IR light tracing technology, work with many of surface.
- 5 switchable DPI 80011200/1600/2000(2400 settings.
- Ergonomic design.
- Compatibility with Windows/Mac operating system.
- Plug & play Nano receiving adapter.
Before use:
- Find the wireless mouse and keyboard and one Nano receiver in the box. Please note that the nano receiver is placed in a box.
- Plug the Nano receiver into the USB port on the computer.
- Install lx M battery into the Mouse, install 2x MA batteries into the keyboard.
- The LED indicator on the mouse and keyboard will flash for a few seconds and indicate that the products are now working.
Product specification
-
DPI adjustable function
5 level DPI DPI 800/1200/1600/2000/2400, Default 1200DPI. press the DPI key, available to switch between the five gears till you like. During the switching process, the LED indicator will flash once for 800DPI, twice for 1200DPI, three times for 1600DPI, four times for 2000DPI, and five times for 2400DPI. -
Low power alarm function
The LED indicator on the keyboard and the mouse will be flash in RED when the battery is going out of work, please replace the new battery in time. -
power-saving mode
If your mouse stays out of work for 8 minutes, it will turn to power-saving mode, press any button to restart it. -
Keyboard :FN key function
Press FN + F1—F12 for multi-media functions. -
Reprogramming the devices
Keyboard Mouse and receiver need to reconnect under the condition of High temperature, high magnetic, strong vibrate Power outages.
Mouse connection:
- Plug the Nano receiver into the USB port.
- Mouse within 50CM to Nano receiver, reinstall the battery, Press any key to reconnect, the above operation must be completed in 15 seconds.
- Your mouse should now be synced.
Keyboard connection:
- Plug the Nano receiver into the USB port.
- Press and hold the ESC key and K key for 3 seconds.
- The Keyboard will be ready once the LED flashes for 3 seconds
- Caution
This mouse uses 2.4GHz radio waves to transmit data with a working distance of 10m. Ensure that there are no large objects between the mouse and the Nano receiver.
Tip: Remove the battery if the mouse is not going to be used for long periods of time.
Remark
This equipment complies with Class B rules in digital apparatus and complies
with Part 15 of the FCC Rules.
Warranty
The warranty period of our products is 12 months from purchase.lf a defective
is found due to qualified problems of the product, please contact us; Service
Email: Eyoososervice@163.com
Package content
Wireless Mouse
Nano Receiver| Wireless Keyboard
User Manual
---|---
Eastern Times Technology Co., Ltd.
Add: Building D,Nan An Industrial Area,Youganpu Village, Fenggang Town,
Dongguan City,Guangdong,China
TEL:86-769-86800666
Service Phone Number:400-865-9898
Fax:86-769-86800338
Welcome to Address: www.eyspc.cn
FCC WARNING STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
MADE IN CHINA