E-YOOSO E-1191 Bluetooth Wireless Mouse Installation Guide

E-YOOSO E-1191 Bluetooth Wireless Mouse

PRODUCT CHARACTERISTICS

1. 2.4G tri-mode, highly universal, with a transmission distance as far as 10m.
2. Using the original power-saving chip PAW3212, low power consumption with the stable cursor.
3. Using USB transmission technology, the polling rate is up to 250Hz, which is twice as fast as the transmission rate of the ordinary mouse, with zero-lag and no frame skipping.
4. High resolution, 5-level DPI: 800/1200/1600/2000/2400,with DPI gear indicator, default 1200DPI.
5. Adopt infrared LED as a moving tracking light source.
6. Provide multi-level power saving mode for battery energy saving and power shut-off.
7. Ultra-micro (Nano) receiver, plug and play.
8. Support Windows XP/Vista/Win7/WIN8/WIN10/WIN11, Mac10.x.

BUTTON FUNCTION

1. Left mouse button
2. Right mouse button
3. Mouse scroll wheel and middle mouse button
4. DPI Switch button (transparent button with status indicator light below DPI/pairing/low power indication)
5. Forward button
6. Backward button
7. Mode Switch button

BASIC OPERATION

• Status indicator light: Red in 2.4G mode.

CONNECTION WITH THE COMPUTER

1. Take the mouse out of the packing box.
2. Load one AA dry battery into the mouse according to the correct polarity.
3. Toggle the toggle switch on the bottom of the mouse to the 2.4G position as needed.
4. When toggling the toggle switch on the bottom of the mouse to 2.4G position: Press the “left button + middle button +right button” and hold them for 3s, now the mouse enters 2.4G pairing mode (The status indicator lamp flashes quickly within the 20s pairing waiting time), then insert the ultra-micro (Nano) receiver into the USB port on the host, now the status indicator light keeps on for 2s, indicating 2.4G mode pairing success.

Now, you can use Bluetooth or a 2.4G mouse after the above steps.

ADJUST MOUSE DPI

Press the DPI switch button on the mouse. In the switching process, the light will flash once for 800 DPI, twice for 1,200 DPI, three times for 1,600DPI, four times for 2,000DPI, and five times for 2,400DPI. (In 2.4 mode, the red light will flash; in BT mode, the blue light will flash).

LOW BATTERY WARNING

With the continuous use of the mouse, the battery voltage drops slowly. When it is lower than the set warning value of 1.0V, the status indicator light will flash quickly once per second when the mouse is in use and will go off after flashing ten times when the mouse is out of use, indicating you should replace the battery in time.

AUTO SLEEP AND MANUAL SHUTDOWN

The mouse will enter standby power-down mode after it is out of use for 30 minutes. You can press any key to wake it up. If you intend to go out with the mouse or quit using it for a long time, please turn the power switch on the bottom of the mouse to the OFF position.

RECONNECTION

Wireless mouse and receiver may lose normal connection due to some special reasons such as high temperature and high magnetic field and can’t use before reconnection. Please reconnect according to the above connection steps.

Notes

1. Make sure that a Bluetooth adapter and corresponding drive have been installed on your computer before pairing the mouse.
2. Please refer to the relevant instructions in the user manual for the adaptor when installing the adaptor drive.
3. It is recommended to use a branded adaptor; otherwise, compatibility issues might be caused.
4. The Nano receiver can be placed in the battery storage socket on the bottom of the mouse for easy carriage and to avoid missing.

WARRANTY

The warranty period for our products is 12 months from purchase.

If a defective is found due to qualified problems of the product, please contact us;

• Service Email: Eyoososervice@163.com.

PACKAGE CONTENT

• Wireless Mouse X1
• Quick Installation Guide X1
• Nano Receiver X1

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

California Proposition 65

WARNING:
Risk of Cancer from Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure.
www.P65Warnings.ca.gov.

MADE IN CHINA.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>