DURGOD K620W Mechanical Keyboard User Manual
- June 3, 2024
- DURGOD
Table of Contents
DURGOD K620W Mechanical Keyboard
ABOUT DEVICE
k610w
k620w
SHORTCUT KEYS
INDICATOR LIGHTS
- when ko10WKb20w Is successfully Connected and functions normally, the indicator lights should also Work normally.
- When K610wK620w pairing is available, the corresponding indicator light flashes quickly.
- When K610wK620w is paired but cannot connect, the corresponding indicator light flashes slowly. Please check ir the device to De be connected is functioning normally.
WIRELESS SWITCH
CONNECTION SPECIFICATIONS
BLUETOOTH CONNECTION
- Turn on the wireless switch.
- Enter Bluetooth mode by pressing FN+QW.
- The corresponding indicator light flashes quickly upon initial use. Search for K610w/K620w on a device that supports Bluetooth low-energy technology and complete the pairing according to the on-device prompts. The corresponding indicator light will be on for 3 seconds and then revert back to the normal indicator status. If re-pairing is needed, long press FN+Q/W for 3 seconds until the indicator light flashes quickly, and then users can proceed with repairing.
WIRELESS CONNECTION
- Turn on wireless switch.
- Plug in the wireless receiver
- Press FN+E to enter 2.4GHz wireless connection mode, after which the device will connect automatically. The indicator light will be on for 3 seconds and then revert back to the normal indicator status.
USB WIRED CONNECTION
- Plug in the USB cable.
- Press FN+R to enter USB wired connection mode.
REGULATORY AND COMPLIANCE INFORMATION
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interfere by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provided
with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate the equipment.
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Zhuhai Hoksi Technology LTD.,Co declares that the radio equipment type
DURGOD K610/K620w Wireless Mechanical Keyboard and Infinite Wireless Receiver
are in compliance with Directive 2014/53/Eu. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.durgod.com.
CAUTION
- Risk of fire or explosion or defeat the safeguard of equipment if the battery is replaced by an incorrect type. Replace only with the same or equivalent type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- High or low extreme temperatures or low air pressure at high altitude that the battery can be subjected to during use, storage or transportation.
- Leaving the battery in an extremely high temperature and/or low air pressure surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
Canada statement
This device contains license-exempt transmitter (s) /receiver (s) that comply
with Innovation, Science and Economic Development Canada s licence-exempt RSS
(). Operation is subject to the following Wo conditions :
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Hereby, Zhuhai Hoksi Technology CO., LTD declares that the radio equipment type DURGOD K610w /K620w Wireless Mechanical Keyboard and Infinite Wireless Receiver are in compliance with Directive SI 2017 No. 1206. The full text of the UK declaration of conformity is available at the following internet address : http://www.durgod.com.
LEARN MORE
Check out www.durgod.com and download “Durgod Zeus Engine” to get:
- The latest firmware updates
- Entire key customization
- Macro editing function
- On-board and cloud storage of configuration profiles
- The latest information on Durgod products
Zhuhai Hoksi Technology CO,LTD
Room803, NO.3 building, NO.6, Pingbei 1Road, Nanping, Technology &lIndustry
Park, Xiangzhou District, Zhuhai City, China Service
- Email: service@durgod.com
- Support Email support@durgod.com