DURGOD TGK200 Wireless Mechanical Gaming Keyboard User Guide

DURGOD TGK200 Wireless Mechanical Gaming Keyboard

Switch model

1. Switch downside: Disconnect battery power, plug in type-c cable (wired mode), and without type-c cable: turn off the battery.
2. Switch upside:
   • Open the battery, automatically switch to Bluetooth mode (default FN+Q). One-touch
   • Manually switch to Bluetooth and 2.4G mode: respectively: FN+Q (Bluetooth), FN+W (Bluetooth), FN+E (Bluetooth), FN+R (2.4G).
   • After pressing FN+ T (Wired), the corresponding key light will display blue (Bluetooth), red (2.4G) and flash slowly three times.

Product Description

• Fn+ Esc=~
• Fn+ 1 =F1
• Fn+ 2 =F2
• Fn+ 3 =F3
• Fn+ 4 =F4
• Fn+ 5 =FS
• Fn+ 6 =F6
• Fn+ 7 =F7
• Fn+ 8 =FB
• Fn+ 9 =F9
• Fn+ 0 =Fl0
• Fn+ – =F11
• Fn+ = =F12
• Fn+ Tab = Restore keyboard to factory mode (hold down for 3 seconds)
• Fn+ 1′ or .1, =Adjust the light brightness of the key zone
• FN+ +-or➔ =Adjust the light speed of the key zone
• Fn+ Win =Lock the Windows key, the key light will show white light constantly and unlock to resume the original key area light mode
• Fn + Caps =MAC/WIN
• Fn + End =Home
• Fn + Del =Ins
• Fn + PgUp = PrtSc
• Fn + PgDn = Pause
• Fn+[{: Key Area Light Mode Cycle Switching
• Fn+]}: Key Area Light Color Switching
• Fn+\I: Keyboard Lights On/Off
• Fn+;” : Bottom light cycle switching
• Fn+'” : Bottom light On/Off
• Fn+ Back Space: backlight will turn off, and the digital keys 1 to 0 will light up to display the battery percentage, for example: 1 lit, indicating 10% battery, 1 and 2 lit, indicating 20% battery. (Below 30% red, below 50% Yellow, above 50% green)

Light Model: Fn+ [{

• Always-on Mode
• Breathing Mode
• Dreamy Rainbow
• One-touch
• Rainy Stroll
• Rainbow Wheel
• Ripple Expansion
• Star-filled Sky
• Snowless Trail
• Unceasing Stream
• Follow the Flow
• Shadowy Follow
• Sinusoidal Wave
• Left-Right Scan
• Rotating Windmill
• Multicolored Waterfall
• Flower Blossoms Fortune
• Rotating Storm
• Collision and Rebound

Low Voltage Status

In wireless mode, when the battery is detected to be lower than or equal to 3.7 V, it will enter shutdown state. When connected to wired charging, it can be restored to normal use. Or when the battery is greater than or equal to 3.3V, it can be used normally.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>