DURGOD Fusion K230 Mechanical Keyboard User Guide
- June 6, 2024
- DURGOD
Table of Contents
DURGOD Fusion K230 Mechanical Keyboard User Guide
About Device
1. Shortcut Keys
2. Wireless Switch
3. Indicator Lights
- When FUSION is successfully connected and functions normally, the indicators lights should also work normally.
When FUSION pairing is available, the corresponding indicator light flashes** quickly.
When FUSION is paired but cannot connect, the corresponding indicator light flashes slowly. Please check if the device to be connected is functioning normally.
When FUSION is successfully connected, the corresponding indicator light will be on for 3 seconds and then revert back to the normal indicator status.
Connection Specifications
KEYBOARD
BLUETOOTH| Frequency range: 2402MHz-2480MHz Transmitter power: <1dBm
2.4GHz WIRELESS| Frequency range: 2402MHz-2480MHz Transmitter power: <3.5dBm
RECEIVER
2.4GHz WIRELESS| Frequency range: 2402MHz-2480MHz Transmitter power: <3.5dBm
Bluetooth Connection
The corresponding indicator light flashes quickly upon initial use. Search for FUSION on a device that supports Bluetooth low energy technology and complete the pairing according to the on-device prompts. The corresponding indicator light will be on for 3 seconds and then revert back to the normal indicator status. If re-pairing is needed, long press FN+Q/W for 3 seconds until the indicator light flashes quickly, and then users can proceed with re-pairing.
2.4 GHz Wireless Connection
Press FN+E to enter 2.4GHz wireless connection mode, after which the device will connect automatically. The indicator light will be on for 3 seconds and then revert back to the normal indicator status.
USB Wired Connection
Press FN+R to enter USB wired connection mode.
Learn More
Check out www.durgod.com and download “Durgod Zeus Engine” to get:
- The latest firmware updates
- Entire key customization
- Macro editing function
- On-board and cloud storage of configuration profiles
- The latest information on Durgod products
Zhuhai Hoksi Technology CO,LTD
Room803, NO.3 building, NO.6, Pingbei 1Road, Nanping, Technology & Industry
Park, Xiangzhou
District, Zhuhai City, China
Service Email: service@durgod.com
Support Email: support@durgod.com
Copyright © 2017 Zhuhai Hoksi Technology CO.,LTD.ALL rights reserved. All copyrights or trademarks are the property of their respective owners. This manual is for reference only, does not constitute any form or commitment.
Regulatory and Compliance Information
- FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfere by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provide
with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
- STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Zhuhai Hoksi Technology LTD.,CO declares that the radio equipment type DURGOD K230 Wireless Mechanical Keyboard and Infinite Wireless Receiver are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.durgod.com
- CAUTION:
- Risk of fire or explosion or defeat the safeguard of equipment if the battery is replaced by an incorrect type. Replace only with the same or equivalent type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- High or low extreme temperatures or low air pressure at high altitude that the battery can be subjected to during use, storage or transportation.
- Leaving the battery in an extremely high temperature and/or low air pressure surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.