DURGOD K330W Wireless Mechanical Keyboard User Guide
- June 6, 2024
- DURGOD
Table of Contents
QUICK GUIDE
—- K330w —-
ABOUT DEVICE
01 SHORTCUT
| 1 | Fn + Q | Switching to bluetooth connection 1 |
|---|---|---|
| 2 | Fn + W | Switching to bluetooth connection 2 |
| Fn + E | Switching to 2.4GHz wireless connection | |
| Fn + R | Switching to USB connection | |
| Fn + Backspace | Switching to customize profile | |
| Fn + WIN | WIN key lock/unlock |
02 WIRELESS SWITCH
03 INDICATOR LIGHTS
Indicator Light| Normal Indicator Status | Wireless Connection Status
Indicator *
---|---|---
A| Caps lock on/of| Bluetooth connection 1 status indicator
| Custom profile| Bluetooth connection 2 status indicator
| WIN key lock| 2.4GHz connection status indicator
| Battery indicator|
- The indicator lights work at normal operation condition when the K330w is connected and working as a keyboard.
** In others,when the K330w is on pairing status,the corresponding connection indicator flashes fast.
When the K330w is paired but not connected,the corresponding connection indicator flashes slowly.
When the connection is successful,the corresponding indicator will keep lighting for 3 seconds and then into normal operation condition.
WIRELESS SPECIFICATIONS
KEYBOARD
BLUETOOTH| Frequency range:2402MHz-2480MHz Transmitter power: <0dBm
2.4GHz WIRELESS| Frequency range: 2402MHz-2480MHz Transmitter power: < ldBm
RECEIVER
2.4GHz WIRELESS| Frequency range:2402MHz-2480MHz Transmitter power: <3dBm
BLUETOOTH CONNECTION
1 Turn on wireless switch.
2
- bluetooth 1 * bluetooth 2
Press FN+Q/W to switching to the bluetooth connection.
3
The corresponding indicator flashes fast when the initial use, and the K330w can be paired. Finish the connection on bluetooth enable device when promoted and the indicator will keep lighting for 3 seconds.When the pairing is requested again,press and hold FN+Q/W for 3 seconds until the indicator flash fast.
2.4GHz WIRELESS CONNECTION
1 Turn on wireless switch.
2 Slide up and remove the wireless receiver.
3 Plug in the wireless receiver.
4
Press FN+E to switching to the 2.4GHz wireless connection.The connection will finish automatically and the indicator will keep lighting for 3 seconds.
USB WIRED CONNECTION
1 Plug in the USB cable.
2
Press FN+R to switching to the USB wired connection.
LEARN MORE
Go to www.durgod.com and download the Durgod Zeus Engine, you can get more things below:
- The latest firmware version
- Customize the keyboard
- Macro function
- Hybrid on-board and cloud storage
- The latest new product information of DURGOD
WeChat Weibo
Zhuhai Hoksi Technology CO,LTD
Room803,N0.3 building,N0.6,Pingbei 1Road,Nanping,Technology & Industry
Park,Xiangzhou
District,Zhuhai City,China
Service Email:service@durgod.com Support Email:support@durgod.com
Copyright © 2017 Zhuhai Hoksi Technology CO.,LTD.ALL rights reserved.All copyrights or trademarks are the property of their respective owners. This manual is for reference only,does not constitute any form of commitment.
REGULATORY AND COMPLIANCE INFORMATION
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfere by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no- collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Zhuhai Hoksi Technology LTD.,CO declares that the radio equipment type DURGOD K330w Wireless Mechanical Keyboard and Infinite V2 Wireless Receiver are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.durgod.com
STATEMENT OF COMPLIANCE WITH UK DIRECTIVE
Hereby, Zhuhai Hoksi Technology LTD.,CO declares that the radio equipment type DURGOD K330w Wireless Mechanical Keyboard and Infinite V2 Wireless Receiver are in compliance with Directive SI 2017 NO.1206. The full text of the UK declaration of conformity is available at the following internet address: http://www.durgod.com
CAUTION:
(1) Risk of fire or explosion or defeat the safeguard of equipment if the
battery is replaced by an incorrect type. Replace only with the same or
equivalent type.
(2) Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
(3) High or low extreme temperatures or low air pressure at high altitude that
the battery can be subjected to during use, storage or transportation.
(4) Leaving the battery in an extremely high temperature and/or low air
pressure surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas.
CANADA STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>