WACKER NEUSON 73709 Compact and Wheeled Excavators User Manual

WACKER NEUSON 73709 Compact and Wheeled

Your reliable solution provider
We provide customers worldwide with an extensive range of construction machines and equipment, spare parts, and services. Since starting our company in 1848,
the Wacker Neuson brand has stood for reliability and the power of innovation. Companies from the main construction industry, gardening and landscaping, industry and municipalities, among other sectors, therefore rely on the innovative solutions of Wacker Neuson.
Wacker Neuson – all it takes!
Our services
When you need us, we are there. We not only advise you during the purchase of a machine, but also afterwards. You can trust our expert and quick support. Find out about our extensive services for construction machines and construction equipment. With our widespread sales and service network, we are always close by.
Find out more about our services: wackerneuson.com/services
Power and efficiency times three:
the tracked excavators ET65, EZ80 and ET90.

| ET65| EZ80| ET90
---|---|---|---
Shipping weight (kg)| 5,806 – 6,682| 7,588 – 8,877| 8,348 – 9,625
Digging depth with short and long dipper stick (mm)| 3,893 – 4,193| 3,919 – 4,169| 4,379 – 4,679
Engine output (kW)

• with articulated boom| 42| 42| 55.4

Economically and powerfully.
Overview of all of the
ET65, EZ80 and ET90 features.

 Quality

• Short hydraulic hoses for less power loss and a long service life
•  Large and sturdy aluminum radiator, easy to clean, and with the highest level of cooling performance in its class
•  High stability due to a low center of gravity and optional additional rear counterweight

Our three economic miracles.
Strong performance: All three excavators consume up to 20% less fuel than comparable models. Nevertheless, they are best in their class within the range of digging power and break out force. We promised you a miracle.
Unique 3-point kinematics.
The higher torque or the 3-point kinematics as well as the 200° -expanded angle of rotation make the ET65 and ET90 the best in their class in terms of digging power.

•  Optimal insertion angle rotation of the bucket
•  Digs even deeper vertically
•  More powerful excavating
•  Improved dumping behavior and less material loss
• Up to 20% more break out force

More leeway thanks to articulated boom.
The articulated boom provides you with more maneuverability and therefore greater freedom of action. Because the additional joint permits the bucket to be pulled right up to the travel gear or the dozer blade. Ideal when narrow spaces need to be accessed or an obstacle has to be moved out of the way. The articulated boom is available as an option for the ET65 and ET90 – and also available with a short or long dipper stick.
More productivity and less consumption.
You will get the maximum output with the load-independent flow distribution (LUDV), 3-point kinematics (ET65, ET90), an articulated boom, and a long dipper stick. The machine is streamlined to high productivity as a result of the efficient hydraulics and the appropriate mechanical foundation for this. This guarantees up to 30% more productivity on the construction site despite the potential fuel savings of up to 20%. Do more for less – three machines for the highest degree of efficiency. More cabin comfort.
The ergonomically optimized cab of the ET65, EZ80, and ET90.
Maximum operating comfort is standard with the ET65, EZ80 and ET90. In addition, we offer you numerous options to adapt your excavator to your individual requirements.

Safety

•  Optimal visibility due to the offset arm position
•  Large skylight for the best view, even upwards
•  Lateral sliding window
•  LED headlights for even better illumination
• Rear-view camera with 7″ multi-functional display for an ideal view to the rear

Innovative windshield system.

The two-part front windshield allows for optimal ventilation in the cabin in any weather. In addition, it makes it easier to communicate with the operator. A separate removal and storage of the window is a thing of the past.

• Closed front windshield – two glass windows keep water and wind out.
• The upper front window can be pushed under the cabin roof. The lower pane serves as splash protection.
• The lower window slides behind the upper window. Ideal for communicating with colleagues.
• If necessary, both panes are pushed below the cabin roof where they are stored safely.

Default settings at the touch of a button.
The Jog Dial system, familiar from the automotive area, including a clear display, allows the operator an intuitive selection of the right operating settings via a press-rotary button, as well as various settings via a keypad. Via the Jog Dial, you can for example save and access the liter quantity or saving/retrieving release for attachments. Individuality through variety.
Put together your perfect working unit from a variety of ex works, available options, such as:

• Up to 5 additional control circuits, of which 3 are individually adjustable
• Diesel particulate filter
• Air-cushioned and heated seat
• 7 LED lights
• 4 track versions
• Custom-made paint finish in automotive quality
• Rearview camera
• Automatic air conditioning
• Counterweight
• Panolin hydraulic oil
• And much more

All-rounder on the construction site:

the tracked excavators ET65, EZ80 and ET90.

• Simple maintenance. Simple repair.
  The high productivity of our machines is not just due to the sturdy technology. Most service work can be completed in a short time due to quick and easily accessible maintenance points. Professional maintenance and repairs done by our technicians and original spare parts by Wacker Neuson also extend the service life of your machines.

• Reduced dimensions.
  Whether during transportation or in tight spaces: Thanks to their compact design, the ET65, EZ80 and the ET90 can easily be taken to your next job site. And on the construction site, the machines can maneuver anywhere — even in confined spaces. You can benefit from high efficiency in all applications.

  • Very low entry height
  • Reduced dimensions due to the intelligent component arrangement
  • Higher level of stability due to the low center of gravity

• The EZ80 with minimal tail overhang.
  Enable the safe and precise work directly against walls or other obstacles on the construction site, and, as a result, a large range of application for the machine. Safety around the machine is also increased and injuries can be prevented.

• Attachment area with many application areas.
  Thanks to up to 5 auxiliary control circuits, the machines are ideally prepared for the application of a range of attachments, and in conjunction with a quickhatch system they can also be changed over without a great deal of effort in a short amount of time.

One of our largest compacts:

the tracked excavator ET145.

Output, maneuverability, and stability.

An overview of the ET145 features. The best of both worlds.
The ET145 combines the productivity of a large excavator model with the advantages of a compact excavator, such as:

• High maneuverability
• Easy transport
• Different track versions
• High digging power, such as with much larger excavators

The champion in the compact class:

the tracked excavator ET145.

• Swivel console for higher productivity.
  The swivel console makes the ET145 into a real highlight in its weight class. This allows you an increased excavation area to the right and left. The swivel console enable work along walls, trenches, or obstacles and improve the area of visibility, e.g. for excavation works in a canal area.

• Large, ergonomic comfort cabin
  Sitting position, armrests and joystick can be individually adjusted. On the large display the operator can see both the image of the rear-view camera and the programmable discharge volumes for the additional control circuits and information on the machine. The Jog Dial can be comfortably operated from the seat position. The cabin is equipped with an air-conditioning system as standard.

• Efficient engine.
  The 55.4-kW-engine offers excellent digging power with low consumption, and fulfills the current exhaust emission standards. Consumption is reduced and the environment is protected as a result of the automatic idling speed control and diesel particulate filter.

• Full power even at low rpm.
  Even at low speed the ET145’s engine develops its full power, which it is able to maintain. As a result of this, it is a clear advantage when compared with conventional engines.

Power and speed, perfectly combined:

the wheeled excavator EW65.

Efficient and fast.

An overview of the EW65 features. More power and range thanks to the 3-point kinematics.
The bucket pivot point and thus the torque increases due to an additional bolt in the joint (articulated) rod linkage.
The advantage in numbers:

• Up to 20% higher break out force
• 5% greater insertion depth
• 0% greater dumping height

Captivating on all terrains:

the wheeled excavator EW65.

• Sophisticated working area.
  The seat, armrests, and joystick position can be individually ad-justed. Operation is easy and intuitive – identical to the ET65. The tried and tested front windshield system makes communication with the operator easier. To open completely, the windshield can simply be slid under the cabin roof, where it can then be fixed.

• More leeway thanks to articulated boom.
  Optionally available with the EW65, the articulated boom with a short or long dipper stick provides you with more maneuverability and therefore greater freedom of action. So not only can you excavate deeper, but the additional joint also makes it possible to pull the bucket all the way to the travel gear or the dozer blade. Ideal when narrow spaces need to be accessed or an obstacle has to be moved out of the way.

• Increased stability.
  A stable, good footing is essential – above all during heavy excavation work or on difficult ground conditions. For support, you can use a dozer blade or support stabilizers – both in front or in the rear or in any combination.

• Both powerful and sensitive.
  Thanks to the load-sensing hydraulics with LUDV (load-independent flow distribution), the power can be adjusted to the situation.

Innovative thinking:

the wheeled excavator EW100.

Developed for the construction site 4.0.

An overview of the EW100 features.

Highest performance across all areas.

With its high engine output, the EW100 achieves the best specification when accelerating and a top-speed of up to 40 km/h. The improved auxiliary hydraulics output also enables the use of a number of attachments.

Setting new standards for the future:

the wheeled excavator EW100.

• Attachment interface.
  The EW100 is equipped ex works for an upgrade with an attachment interface. This enables a development of the machine software with future development within the field of digitization without the need to execute any conversions to the machine. With this, communication can be performed directly with the attachments via the machine and the construction process can be optimized.

• Preparations for assistance systems and attachment control.
  The machine is already prepared ex works for the retrofitting of assistance systems or attachment controls. These can be retrofitted without a great deal of effort via software updates. As a result of this, it is possible to avoid both cost and time-intensive conversions.

Very good all-round visibility.

The machine’s design has, in particular, been optimized for the operator in terms of the range of visibility. For example, the right tire is easily visible in the normal seat position. This increases, among other things, the safety for the operator and the construction site area.

• Human Machine Interface.
  The wheeled excavator EW100 saves individual settings and information for different operators and construction sites. The saved data can be reactivated through selection on the standard 10-inch touchscreen display and the work can be continued. The operator-based machine setting stores both personal key assignment for the operator’s own comfort, as well as attachment and flow rate settings per user.

• 360° stability.
  The machine also stands secure on the ground, even with high weights. With the 360° stability it is also possible to move large loads, even without the machine becoming unstable. With the optimal balance, the machine’s lateral stability also increases by 25%

• Compact and powerful.
  The EW100 combines the dimensions of a compact machine with the output of a 14-ton excavator. The 20% more swing power for tilt-rotator applications and the proven 3-point kinematics with the swivel console provide even more freedom of movement. 200° bucket rotation angle, 20% improved digging specifications and, as a result, 360° stability make the EW100 a powerful construction site aid.
  

• Many attachments, minimal effort.
  Simply select, attach and go. Attachments that are already saved are partly automatically coupled and the operator no longer needs to leave the machine for this. The machine learns to recognize intelligent attachments and to communicate with them. Manual attachments can be stored once and, as a result, need only be selected in future by pressing on the display and then recognized.

“Next level” of wheeled excavators:

Best equipped now for the future.

• Trailer operation up to 12 tons.
  Thanks to its high output, the EW100 is prepared for trailer operation (braked up to 12 tons). As a result, additional transport vehicles can be saved for attachments or small machines.

• Select and go.
  Already pre-configured and manually stored attachments can be simply and intuitively changed over at any time. The operator is guided through the individual save and setting options.

• Customizing made easy.
  If desired, an in-house user, the current construction site, and in-house joysticks can be configured to ensure the optimal production run with a guaranteed feeling of comfort. With this the operator has all of the important details immediately available to him. Different construction sites can be retrieved after inputting, and all information regarding this can be retrieved.

• Low in maintenance and service.
  The increased maintenance intervals and an integrated self-check system enormously minimize the downtimes of the machine. Should an error arise, the troubleshooting saves high costs and can also provide information about the current status of the ma-chine via a remote diagnosis.

Attachments.

Quick hitch systems

• EasyLock+.
  With the hydraulic quick hitch system EasyLock+, you can changeover the attachment in just a few seconds by a press of a button from the operator’s seat. With this you can be even more flexible and productive.In addition to the normal dipper operation, the system also enables use as a face shovel. As a result, the new EasyLock+ is even more safe and fulfills all the requirements of current standard specifications.

• Powertilt.
  The Powertilt swivel unit is available as an option and can be combined with both Easy Lock+ and the Lehmatic quick hitch system. This allows the attachment to be rotated by up to 90° per side – ideal for leveling, mulching, or demolition work.

• Lehmatic.
  With the Lehmatic quick coupler system, you have the option to select between the mechanical and hydraulic system. The system has a long service life and is functionally reliable, even in hard ap-plications. The hydraulic system is equipped with a “double-lock” retainer. The Lehmatic quick hitch system is available both with or without the Powertilt.

The right machine for every application.

• Boom types.
  Wacker Neuson offers you different types of booms for excavating, separating, transporting and shaking off soils or other bulk materials. These are available both for EasyLock+ and for Lehmatic quickhatch systems.
  To be equipped from the outset for all situations, there are a number of predefined boom sets ex works. You can find more information from your local sales partner.

• Hydraulic breakers.
  Our range of hydraulic breakers as attachments for mini exca-vators, compact excavators and wheeled excavators is ideal for demolition and renovation work. The energy recovery system offers you a high level of productivity. The output directly at the hammer remains constant and reliably high as a result of the innovative system.

• Power grab.
  The power grab is ideally coordinated to our machine and pro-vides an extensive range of application options, from gardening and landscaping through to demolition work. Sorting and demolition grabs, and multi-purpose grabs are available in different sizes ex works.

Configuration options

Dimensions

| Unit| ET65| EZ80| ET90| ET145| EW65| EW100
---|---|---|---|---|---|---|---
A| Height| mm| 2,478| 2,562| 2,562| 2,790/ 2,825(4)| 2,775| 2,963
B| Width of travel gear, retracted (track / tires)| mm| 1,950| 2,250| 2,250| 2,490| 1,832
2,088(1)| 2,450
C| Transport length (short dipper stick)| mm| 6,128/ 6,100(3)| 6,939| 7,117/ 6,468(3)| 7,720| 6,114/ 6,220(3)|
C| Transport length (long dipper stick)| mm| 6,135/ 6,210(3)| 6,944| 7,139/ 6,690(3)| 7,790| 6,137/ 6,349(3)| 6,707
D| Max. digging depth (short dipper stick)| mm| 3,757/ 3,879(3)| 3,919| 4,325/ 4,379(3)| 5,000| 3,531/ 3,596(3)|
D| Max. digging depth (long dipper stick)| mm| 4,003/4,184(3)| 4,169| 4,625/4,679(3)| 5,500| 3,831/ 3,895(3)| 4,968
E| Max. vertical insertion depth (short dipper stick)| mm| 2,431/ 2,811(3)| 1,915| 3,192/ 3,198(3)| 3,100| 2,088/ 2,465(3)|
E| Max. vertical insertion depth (long dipper stick)| mm| 2,704/ 3,095(3)| 2,124| 3,474/ 3,456(3)| 3,600| 2,361/ 2,737(3)| 3,039
F| Max. insertion height (short dipper stick)| mm| 5,759/ 6,539(3)| 6,620| 7,322/ 7,931(3)| 8,300(5)| 6,068/ 6,834(3)|
F| Max. insertion height (long dipper stick)| mm| 5,940/ 6,774(3)| 6,782| 7,529/ 8,196(3)| 8,600(5)| 6,250/ 7,067(3)| 8,069
G| Max. dumping height (short dipper stick)| mm| 3,993/ 4,684(3)| 4,587| 5,066/ 5,674(3)| 5,700/ 5,659(4)| 4,207/ 4,961(3)|
G| Max. dumping height (long dipper stick)| mm| 4,714/ 4,916(3)| 4,749| 5,272/ 5,940(3)| 6,000| 4,389/ 5,195(3)| 6,260
H| Max. digging radius (short dipper stick)| mm| 6,224/ 6,601(3)| 6,955| 7,331/ 7,596(3)| 8,300| 6,220/ 6,590(3)|
H| Max. digging radius (long dipper stick)| mm| 6,508/ 6,890(3)| 7,190| 7,620/ 7,889(3)| 8,800| 6,504/ 6,877(3)| 7,713
I| Max. reach at ground level (short dipper stick)| mm| 6,100/ 6,487(3)| 6,795| 7,179/ 7,463(3)| 8,100| 6,024/ 6,406(3)| _
I| Max. reach at ground level (long dipper stick)| mm| 6,391/ 6,779(3)| 7,036| 7,474/ 7,751(3)| 8,600| 6,318/ 6,706(3)| 7,503
J| Min. tail swing radius| mm| 1,363| 1,228| 1,583| 2,015| 1,459| 1,690
K| Max. boom offset to center of bucket (right/left)| mm| 766 / 492| 705 / 683| 705 / 683| 850 / 640| 766 / 492| 940 / 625
L| Max. stacking height dozer blade above subgrade (short/long)| mm| 403| 474| 479| 492/ 532(4)| 395| 390
M| Max. scraping depth of dozer blade under subgrade (short/long)| mm| 427| 523| 518| 531/ 493(4)| 301| 136
N| Total track length| mm| 2,516| 2,826| 2,826| 3,605| 2,887| 3,193
O| Max. swing angle of arm system to the right| °| 63| 63| 63| 57| 63| 55
P| Max. swing angle of arm system to the left| °| 67| 67| 67| 70| 67| 70
Q| Track/tire width| mm| 400| 450| 450| 500| 300/457(1)| 490 / 514 / 577
R| Boom swing radius, center| mm| 2,453
3,159(3)| 2,869| 2,503
2,840(3)| 2,814| 2,465
2,605(3)| 3,141

Technical data

General

| Unit| ET65| EZ80| ET90| ET145| EW65| EW100
---|---|---|---|---|---|---|---
Shipping weight| kg| 5,806 – 6,682| 7,588 – 8,877| 8,348 – 9,625| 14,917 – 15,701| 6,472 – 7,720| 10,320 – 11,550
Operating weight| kg| 6,078 – 7,358| 7,918 – 9,544| 8,710 – 10,506| 15,551 –17,275| 6,755 – 8,647| 10,625 – 11,855
Max. ripping force*| kN according to ISO 6015| 30.8| 43.7| 46| 69| 30.8| 44
Max. break out force| kN according to ISO 6015| 50.7| 68| 73.8| 91| 50.7| 73.3

Engine

| Unit| ET65| EZ80| ET90| ET145| EW65| EW100
---|---|---|---|---|---|---|---
Drive output| according to ISO kW/hp| 42 /57.1| 42 /57.1| 55.4 /75.3| 55.4 /75.3| 42 /57.1| 55/75

100/136*

Fuel tank volume| l| 85| 85| 85| 205| 85| 190
Emission standard| –| Stage V

Hydraulics

| Unit| ET65| EZ80| ET90| ET145| EW65| EW100
---|---|---|---|---|---|---|---
Hydraulic system / pumps|

–

| LUDV with variable displacement pump| Negative control with dual variable displacement pump and 2 gear pumps| LUDV with variable displacement pump, separate travel pump
Max. flow rate| l/min| 144| 160| 175| 2 x 118 + 20 + 36| 158.4 + 99| “180 + 106
170 + 171*”
Operating pressure for work and drive hydraulics| bar| 240| 300| 300| 340| 240 /420| 300 / 470
Operating pressure for swing gear| bar| 215| 240| 240| 320| 215| 240
Auxiliary hydraulics, max. discharge volume| l/min| 107| 113| 113| 121| 107| 120

Travel gear

| Unit| ET65| EZ80| ET90| ET145| EW65| EW100
---|---|---|---|---|---|---|---
Ground clearance| mm| 284| 357| 370| 480| 237| 293 / 301 / 310
Max. travel speed| km/h| 5.2| 4.4| 5| 5| up to 30| 40
Ground pressure of basic machine| kg/cm²| 0.35| 0.36| 0.40| 0.50| –| –

Noise emissions

| Unit| ET65| EZ80| ET90| ET145| EW65| EW100
---|---|---|---|---|---|---|---
Sound power level (LWA)| dBA acc. to 2000/14/EC| 97| 97| 99| 99| 97| tba
Emission sound pressure level (LpA)| dBA acc. to ISO 6394| 77| 79| 79| 75| 77| tba

Lift capacity tables

Meaning of abbreviations in tables

• A Outreach from middle of rotating assembly
• B Height of load hook
• MAX: Permissible load with extended dipper stick
• C Dozer blade up or down, in travel direction – except EW100: against travel direction
• D Dozer blade up, revolving superstructure 90° to travel direction

Lift capacity limited by hydraulics
Actual lift capacity depends on the outfitting of the machine. You can find these in the respective operator’s manual.

Wacker Neuson – all it takes

References

• Worldwide | Wacker Neuson
• Worldwide | Wacker Neuson

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>