essentials ERSC3878 Fan Heater User Guide
- June 9, 2024
- essentials
Table of Contents
essentials ERSC3878 Fan Heater
Overview
**1**
**2**
**3**
**4**
5
**6**
| Control panel with touch- sensitive button
---|---
Air vent
Protective cover
Main switch
Power cord
** Temperature control knob
7**
9
| Standby button
Indicator lights
Power selection button
**10| ** Timer control button
YOu have just purchased an Essentiel b branded product, and we thank yOu Por youn purchase. We pay particular attention to the RELIABILITY, EASE OF USE and DESIGN Of Our products We hope you will be completely satisfied with this Pan heater
Box contents
- 1 fan heater
- 1 user manual
Technical Characteristics
- Supply voltage: 220-240 V~
- Power frequency: 50-60Hz
- 2 heating levels: 900 & 1800W
- Adjustable temperature control
- Adjustable timer (up to 7 hours)
- Fan mode for optimal air flow
- Touch-sensitive buttons
- Power cord length: 1.30m
- Weight: 1 .4 kg
- Not bathroom-compatible
- Suitable for an area of 18 m2
Product Data Sheet
USE
IMPORTANT:
Before using the appliance, it must be placed on a flat and stable surface,
otherwise the tilt protection system will switch it off. Do not use the
appliance if it has been dropped or shows visible signs of damage.
Step| Indicator|
---|---|---
|
/
| Plug the power cable (5) into a power outlet that complies with the
specifications.
2| | Set the main switch (4) to position -. There is a beep sound and the
standby indicator light comes on.
3| | Press the standby button (7) to switch on the heating, and there is a
beep sound.
4| /| Select the temperature, power and the timer, if necessary. Check out the
following sections.
5| | Press the standby button (7) to switch off the heating, and there is
a beep sound.
The fan of the appliance will run for a few moments to cool down, and then
switch off.
6| | Set the main switch (4) to position O and unplug the power cord
from the outlet.
Thermal safety:
In the event of overheating, the safety device is automatically activated and
he appliance will shut down. Put the main switch (4) in positionO, unplug the
appliance and let it cool down. Then restart the appliance normally.
Setting the temperature
Press the temperature setting button (6) to select the temperature you want in the room. The corresponding indicator lights up and there is a beep each time you press it.
Each press of the button increases the temperature setting:
15°C > 20°c > 25°C > 30°C
NOTE:
When the 4 temperature indicators (15 + 20 + 25 + 30°C} are active, this means
that the appliance is in continuous heating mode: it will work for 12 hours
continuously, and then automatically switch to standby. The temperature sensor
does not work when this mode is active.
Power adjustment
Press the power adjustment button (9) to select the operating power. There is a beep sound with each press of the button.
Each press of the button switches to a different power setting:
900W > 1800W > Ventilation
TEMPERATURE AND POWER ADJUSTMENT
If the appliance:
- is not unplugged; or
- is not switched off using the main switch (4); or
- is not moved (tilt protection), it retains the previous setting in the memory.
Timer function
Press the timer setting button (10) to set the operating time before the appliance switches off automatically. There is a beep sound with each press.
Cleaning And Maintenance
IMPORTANT:
- Always unplug the power cord from the electrical outlet and allow the appliance to cool before cleaning or servicing.
- Do not immerse the appliance in water or any other liquid.
To work optimally, the appliance requires regular maintenance:
Wipe the exterior surfaces of the appliance with a soft, slightly damp cloth
to remove dust and dirt. Never use abrasive cleaning products on this
appliance (alcohol, solvent, etc.)
Use a vacuum cleaner to remove dust from the vent grille. Check that the appliance is completely dry before plugging it in again. If the appliance is not going to be used for a prolonged period, switch it off, unplug it, and store it in a clean, dry place.
All information, designs, drawings and pictures in this document are the property of SOURCING & CREATION. SOURCING & CREATION reserves all rights to its brands, designs and information. Any copy and reproduction through any means shall be deemed and considered as counterfeiting.
Protection of the environment
This symbol attached to the product means that it is an appliance whose disposal is subject to the directive on waste from electrical and electronic equipment (WEEE). This appliance may not in any way be treated as household waste and must be subject to a specific type of removal for this type of waste. Recycling and recovery systems are available in your area (waste removal) and by distributors. By taking your appliance at its end of life to a recycling facility, you will contribute to environmental conservation and prevent any harm to your health.
Warranty
Tested in our laboratories
Warranty valid from the date of purchase (receipt as proof of purchase). This
warranty does not cover defects or damage caused by improper set up, incorrect
use, or normal wear and tear of this product.
Please behave responsibly towards the environment. Recycle this product at the end of its life.
Customer Relations Department
Avenue de la Motte CS 80137 59811 Lesquin cedex.
SOURCING & CREATION
Avenue de la Motte
59810 Lesquin – FRANCE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>