KOHLER Kingston K-25077-SS Two Piece Elongated Toilet Owner’s Manual
- June 29, 2024
- Kohler
Table of Contents
KOHLER Kingston K-25077-SS Two Piece Elongated Toilet
Product Information
The KingstonTM two-piece elongated toilet is designed to provide efficient flushing with a flush rate of 1.28 gpf. It features a Class Five flush type that effectively removes waste. The toilet is ADA, OBC, and CSA B651 compliant when installed according to specific requirements.
Specifications
- Toilet Type: Two-piece elongated toilet
- Flush Rate: 1.28 gallons per flush (gpf)
- Trap Passageway: 2-1/8″ (54 mm)
- Water Surface Size: 10-5/8″ x 6-15/16″ (269 mm x 176 mm)
- Rough-in: 12″ (305 mm)
Installation
Install the KingstonTM toilet according to the provided installation
instructions. Plumbing codes may require elongated toilets and elongated,
open-front seats in public bathrooms. Accessibility standards may require
controls to be located on the open side of the toilet.
Cleaning
Always clean and wash the toilet thoroughly before and after each use. This
will help maintain hygiene and prevent the buildup of stain- and odor-causing
bacteria on the fixture surface.
Recommended Products/Accessories
- K-7637 Angle Supply with Stop (single)
- K-20110 BreviaTM Quiet-CloseTM elongated toilet seat
- K-4650-A LustraTM Elongated toilet seat with antimicrobial agent
- K-5420 Low-Profile Bolt Caps
- K-23726 Drain treatment
FAQ
-
Q: Does the Kingston toilet protect against bacteria and viruses?
A: No, this product does not protect users against bacteria, viruses, or other disease organisms. It is important to clean and wash the product thoroughly before and after each use. -
Q: What are the available colors/finishes for the KingstonTM toilet?
A: Color tiles are intended for reference only. The available color codes are White (Code 0). -
Q: What are the codes/standards compliance for the KingstonTM toilet?
A: The toilet complies with ASME A112.19.2/CSA B45.1, DOE – Energy Policy Act 1992, California Energy Commission (CEC), ADA, ICC/ANSI A117.1, and CSA B651 standards.
Features
- Ideal for commercial installations
- Antimicrobial finish inhibits the growth of mold-, mildew-, stain-, and odor-causing bacteria on the fixture surface. This product does not protect users against bacteria, viruses, or other disease organisms. Always clean and wash this product thoroughly before and after each use
- Two-piece design
- Elongated bowl offers added room and comfort
- 1.28 gpf (4.8 lpf)
- Durable metal left-hand Polished Chrome trip lever
- 2-1/8″ (54 mm) fully glazed trapway
- Easy-to-service silicone seal
- Sanitary guard where bowl and tank meet for ease of cleaning
- Encapsulated bolts prevent rust and corrosion
- Comfort Height® feature offers chair-height seating that makes sitting down and standing up easier for most adults
- Class Five® canister optimizes the flow out of the tank, harnessing gravity and the natural powerful reducing cascade of water to increase the power and effectiveness of the flush
Installation
- Three-bolt quick-connect installation
- Standard 12″ (305 mm) rough-in
- Seat and supply line sold separately
Recommended Products/Accessories
- K-7637 Angle Supply with Stop (single)
- K-20110 Brevia™ Quiet-Close™ elongated toilet seat
- K-4650-A Lustra™ Elongated toilet seat with antimicrobial agent
- K-5420 Low-Profile Bolt Caps
- K-23726 Drain treatment
Included Components
- K-25100 Toilet tank, 1.28 gpf
- K-25076-SS Elongated toilet bowl
Codes/Standards
- ASME A112.19.2/CSA B45.1
- DOE – Energy Policy Act 1992
- EPA WaterSense®
- California Energy Commission (CEC)
- ADA
- ICC/ANSI A117.1
- CSA B651
- OBC
- IAPMO Certification
KOHLER® Toilets and Seats Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only
Dimension
Technical Information
All product dimensions are nominal.
- Toilet type: Floor-mount
- Waste Outlet: Floor
- Bowl shape: Elongated
- Flush type: Class Five
- Trap passageway: 2-1/8″ (54 mm)
- Water surface size: 10-5/8″ x 6-15/16″ (269 mm x 176 mm)
- Rim to water surface: 5-5/8″ (143 mm)
- Rough-in: 12″ (305 mm)
- Seat-mounting holes: 5-1/2″ (140 mm)
Notes
- Install this product according to the installation instructions.
- For back-to-back toilet installations: Use only a 45° double wye fitting.
- ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.
- Plumbing codes may require elongated toilets and elongated, open-front seats in public bathrooms.
- Accessibility standards may require controls to be located on the open side of the toilet.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 6-8-2024 21:09 – US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>