KOHLER Kingston K-25077-RA Two Piece Elongated Toilet Owner’s Manual
- June 29, 2024
- Kohler
Table of Contents
Kingston™
Two-piece elongated toilet, 1.28 gpf
K-25077-RA
Features
- Ideal for commercial installations
- Two-piece design
- Elongated bowl offers added room and comfort
- 1.28 gpf (4.8 lpf)
- Durable metal right-hand Polished Chrome trip lever
- 2-1/8″ (54 mm) fully glazed trapway
- Easy-to-service silicone seal
- Sanitary guard where bowl and tank meet for ease of cleaning
- Encapsulated bolts prevent rust and corrosion
- Comfort Height® feature offers chair-height seating that makes sitting down and standing up easier for most adults
- Class Five® canister optimizes the flow out of the tank, harnessing gravity and the natural powerful reducing cascade of water to increase the power and effectiveness of the flush
Installation
- Three-bolt quick-connect installation
- Standard 12″ (305 mm) rough-in
- Seat and supply line sold separately
Recommended Products/Accessories
K-7637 Angle Supply with Stop (single)
K-20110 Brevia™ Quiet-Close™ elongated toilet seat
K-4650-A Lustra™ Elongated toilet seat with antimicrobial agent
K-5420 Low-Profile Bolt Caps
K-23726 Drain treatment
K-5724 PureWash® M250 Elongated manual bidet toilet seat
Included Components
K-25076 Elongated toilet bowl
K-25100-RA Toilet tank, 1.28 gpf
Codes/Standards
ASME A112.19.2/CSA B45.1
DOE – Energy Policy Act 1992
EPA WaterSense®
California Energy Commission (CEC)
ADA
ICC/ANSI A117.1
CSA B651
OBC
IAPMO Certification
KOHLER® Toilets and Seats Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only
Color
| Code| Description
---|---|---
| 0|
White
For Back-to-Back Toilet Installations
Use a 45° double wye fitting. Do not use a double sanitary tee.
Technical Information
All product dimensions are nominal.
| Toilet type: | Floor-mount |
|---|---|
| Waste Outlet: | Floor |
| Bowl shape: | Elongated |
| Flush type: | Class Five |
| Trap passageway: | 2-1/8″ (54 mm) |
| Water surface size: | 10-5/8″ x 6-15/16″ (269 mm x 176 mm) |
| Rim to water surface: | 5-5/8″ (143 mm) |
| Rough-in: | 12″ (305 mm) |
| Seat-mounting holes: | 5-1/2″ (140 mm) |
Notes
Install this product according to the installation instructions.
For back-to-back toilet installations: Use only a 45° double wye fitting.
ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.
Plumbing codes may require elongated toilets and elongated, open-front seats in public bathrooms.
Accessibility standards may require controls to be located on the open side of the toilet.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 6-8-2024 20:30 – US