KOHLER Mendota K-506 60×32 Inch Alcove Bath Right Drain Owner’s Manual
- June 29, 2024
- Kohler
Table of Contents
Mendota®
60″ x 32″ alcove bath, right drain
K-506
Features
- 59-1/2″L x 32″W x 16-1/4″H
- Standard 5′ x 32″ size for alcove installation
- Integral apron for quick installation
- Integral lumbar support
- Safeguard® slip-resistant surface provides excellent traction underfoot
Material
- KOHLER® enameled cast iron
Installation
- Alcove
- Integral flange
- Right drain
Required Products/Accessories
K-T37391 Rotary-turn bath drain trim
K-T37392 Rotary-turn bath drain trim
or
K-37383 Rough-in cable bath drain, PVC, 30″ cable with tubing
K-78438 30″ cable bath drain
Recommended Products/Accessories
K-1491 Bath/Whirlpool Pillow
K-1601 Bath/whirlpool footstop, removable
K-7213 27″ Cable Bath Drain
K-7214 27″ Cable Bath Drain
K-7259 Brass toe tap bath drain
K-706000-D3 Frameless Sliding Bath Door
K-706000-L 62″ H sliding bath door with 1/4″-thick glass
K-706004-D3 Frameless Sliding Bath Door
K-706004-L Frameless Sliding Bath Door
K-23726 Drain treatment
K-23725 Cast iron cleaner
K-31796 Above-the-floor bath drain kit
K-31798 Bath drain kit
Codes/Standards
ASME A112.19.1/CSA B45.2
ASTM F462
ADA
ICC/ANSI A117.1
IAPMO Certification
KOHLER® Enameled Cast Iron Bath and Shower Base Lifetime Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color | Code | Description |
---|---|---|
0 | White | |
96 | Biscuit |
No change in measurements if connected with drain illustrated. (K-7160-TF)
-
Finished Wall
-
Finished Wall
-
Sub Floor
-
Lumbar Angle 28°
-
Finished Floor
-
1-1/2″ NPT Thread
-
1-1/2″ Bath Drain
Technical Information
All product dimensions are nominal.
Drain location: | Right |
---|---|
Basin area, bottom: | 46″ x 20″ (1168 mm x 508 mm) |
Basin area, top: | 54″ x 24″ (1372 mm x 610 mm) |
Weight: | 351 lbs (159.2 kg) |
Minimum floor load: | 56 lbs/ft² (273.4 kg/m²) |
Water depth: | 10-7/8″ (276 mm) |
Water capacity: | 45 gal (170.3 L) |
Minimum flat for door: | 1-7/8″ (47 mm) |
Notes
Measure your actual product for rough-in details.
Install this product according to the installation instructions.
The hot water supply should be 70% of the capacity of the bath or greater.
Installations will vary.
ADA compliant when installed to the specific requirements of these
regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 6-8-2024 20:10 – US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>