KLOCK Rocker Switch Mount User Manual
- June 28, 2024
- KLOCK
Table of Contents
Rocker Switch Mount
Product Information
Specifications:
- iOdiscTM: Adhesive disc for device mounting
- iOcoreTM: Magnetic powerhouse available in multiple colors
- Device Tether: Enhances security for smartphones
Product Usage Instructions
Adhering the iOdiscTM
-
Clean the surface of your device case and allow it to dry.
-
Center the iOdiscTM on your case and apply firm pressure while
on a flat surface to adhere it. -
Allow adhesive to set for at least 24 hours before attaching to
the iOcoreTM. -
For best results, let it set for 72 hours before first
use.
Device Mount Installation
-
Choose your device mount location.
-
Remove the switch plate cover or cut a 3/4 x 1 3/8 section of
dash out for device mount placement. -
Slip the backing plate into the switch relief and secure the
device mount to the dash.
Tips and Tricks
-
Avoid using full-size tablets or larger devices on certain
mounts. -
Ensure the surface is suitable for adhesion; avoid rubber,
silicone, soft-touch, and textured surfaces. -
Use a smooth plastic, non-silicone case for best results.
-
Once applied, the iOdiscTM has permanent adhesive and is
challenging to remove without causing damage. -
Follow state laws regarding device use while riding or
driving.
FAQ
Questions?
- Website: GetKlocked.com
- Email: [email protected]
- Phone: 605-996-3700
Connect to even more…
Explore stands, wall mounts, car mounts, and more at: GETKLOCKED.COM
**SHARING IS CARING! LIKE, TAG OR SHARE.
GETKLOCKED**
welcome to i mounts®
ROCKER SWITCH MOUNT
WATCH THIS VIDEO
1:27 / 3:20
SCAN HERE
Learn how to adhere the iOdiscTM correctly to guarantee
a wonderful experience. GETKLOCKED.COM/HOWTO
iOmountsTM COMPONENTS
iOdiscTM
KEEP EXTRAS ON HAND!
Once an iOdiscTM`v is adhered to
a device, it can readily use the iOmounts system.
iOcoreTM
CUSTOMIZE YOUR LOOK
The magnetic iOcoreTM (the powerhouse in this system) is available in multiple
colors.
DEVICE TETHER
The Device Tether can be used with almost any smartphone to give an added
sense of security and piece of mind when using or mounting your smart device.
Place tether tab through charging port.
Snap phone back in place in your case.
Attach lanyard to tether tab and GO!
INSTALLATION
When adhering the iOdiscTM allow adhesive to set at least 24 hours before
attaching to iOcore. For best results, let set 72 hours before first use.
1 24 hrs
2
3
ADHERE
Clean the surface of your device case and allow to dry. Center the iOdiscTM on
your case then apply with firm pressure to the case while on a flat surface
and adhere.
INSTALL
1. Choose your device mount location.
2. Either remove the switch plate cover
or cut a 3/4″ x 1 3/8″ section of
dash out for device mount
2
placement. (See template below.)
3. Slip backing plate into switch relief from Step 2 and secure device mount to dash.
3
ATTACH
Once the iOdiscTM has cured for 24 hours, your device is ready to be attached
to any iOmount®!
PLACEMENT TEMPLATE
A FEW TIPS AND TRICKS…
We do not recommend using full-size tablets or other larger devices on model-
specific, nomadTM, nomadXLTM, or nomad+TM mounts.
While a very strong 3M VHB adhesive is used, the iOdiscTM will not stick to
all surfaces and materials. This includes rubber, silicone, soft-touch and
other soft and/or textured surfaces.
For best results, Klock Werks recommends the use of a smooth plastic, non-
silicone case.
Each iOdiscTM utilizes permanent adhesive and is very difficult to remove once
applied. Klock Werks and/or iOmountsTM are not responsible for any damages
caused by the removal of the iOdiscTM.
WARNING: When riding or driving, please follow your state laws regarding
device use.
QUESTIONS?
DON’T HESITATE TO REACH OUT
WEBSITE GetKlocked.com
EMAIL [email protected]
CALL 605-996-3700
CONNECT TO EVEN MORE…
Connect to stands, wall mounts, car mounts and more.
Find it all at: GETKLOCKED.COM
SHARING IS CARING! LIKE, TAG OR SHARE.
GETKLOCKED
ROCKERMOUNTR3 ©2024 KLOCK WERKS