LIAN LI O11VX Tower Black Case Installation Guide

June 28, 2024
LIAN LI

LIAN-logo

LIAN LI O11VX Tower Black Case

Specifications

  • Case components: Various screws, stand-off bolts, anti-vibration rings, female clips, cable ties
  • PSU installation: Bracket removal for installation
  • I/O ports: Power Reset, USB 3.2 Type C, USB 3.0, Microphone Combo Jack, USB 3.0, USB 3.2 GEN.2, HD AUDIO
  • Supports: Motherboard USB 3.0 20 Pin header
  • Radiator & cooling support: Compatible with various fan and radiator configurations

Product Usage Instructions

PSU Installation

  1. Option 1: Install PSU with the bracket
  2. Option 2: Remove the bracket and install the PSU

Motherboard Installation

  1. Remove the motherboard tray and back plate
  2. Install the back plate and the motherboard tray

Cable Management

  1. Install cable holders for organization
  2. Use velcro straps to manage small cables
  3. Place controllers by removing velcro straps if needed

Radiator & Cooling Support
Supports various fan and radiator configurations. Follow specific instructions for installation based on desired fan and radiator setup.
Graphic Card Anti-Sag Bracket Installation
Follow specific instructions provided in the manual for installing the anti-sag bracket for graphic cards.

FAQ

  • Q: Do I need to remove the front glass panel during regular assembly?
    A: No, the front glass panel does not need to be removed during regular assembly.

  • Q: How do I adjust the first slot in low mode?
    A: Follow the instructions provided in the manual for adjusting the first slot in low mode.

  • Q: What tools are included for installation?
    A: Screws for motherboard and SSD mounting, stand-off bolts, anti-vibration rings, cable ties, and tools for stand-off bolts are included.

Installation Guide

  • Remove the side panel, top glass and side glass
  1. Remove the protecting clip
  2. Peel off the protective film on both sides
  3. Recommend to keep the protecting clip on for transportation

Case components

LIAN-LI-O11VX-Tower-Black-Case- \(5\)

  • A Power Button/ Reset Button
  • B Motherboard High Mode: 120 mm fan x 1
  • C Motherboard Low Mode: 120 mm fan x 2 or 240 mm radiator x 1
  • D Removable fan bracket,
  • E Support 120 mm fan X 3 or 140 mm fan X 3 or 360 mm radiator X 1 or 280 mm radiator X 1Removable fan bracket,
  • F Support 120 mm fan X 3 or 140 mm fan X 2 or 360 mm radiator X 1 or 280 mm radiator X 1
  • G IO ports: 1 x Audio / Microphone Combo Jack, 2 x USB 3.0, 1 x USB 3.2 Type C
  • H Removable Toolless SSD tray, Support 2.5” SSD x 3
  • I Removable HDD cage, Support 3.5″ HDD x 2 or 2.5” SSD x 2
  • J PSU tray, Support ATX PSU x 1

Hardware list

  • LIAN-LI-O11VX-Tower-Black-Case- \(6\) LIAN-LI-O11VX-Tower-Black-Case- \(7\)
  • For graphic card anti-sag bracket kit installation

PSU installation

LIAN-LI-O11VX-Tower-Black-Case- \(8\)

  • Way 1: Install Directly
  • Way 2: Remove the bracket and install

I/O ports function

  • /Installation du port I/O/I/O-Port

LIAN-LI-O11VX-Tower-Black-Case- \(9\)

5″ SSD installation
Installation de 2.5″ SSD

  • Way 1: Swing 180°to open
  • Way 2: Remove

LIAN-LI-O11VX-Tower-Black-Case- \(10\) LIAN-LI-
O11VX-Tower-Black-Case- \(11\)

2.5″ SSD, 3.5″ HDD installation

  •  Installation de 2.5″ SSD ,3.5″ HDD / 2.5″ SSD ,3.5″ H

LIAN-LI-O11VX-Tower-Black-Case- \(12\)LIAN-LI-O11VX- Tower-Black-Case- (21)

If space is needed, the hard drive cage can be removed

Motherboard installation

Mainboard-InstallationLIAN-LI-O11VX-Tower-Black-Case-
\(13\)

Please install the cooler backplate when removing the motherboard tray

  • Remove the motherboard tray and back plate
    LIAN-LI-O11VX-Tower-Black-Case- \(14\)

  • Install the back plate and the motherboard trayLIAN-LI-O11VX-Tower-Black-Case- \(15\)

  • First Slot Adjustment in Low Mode

  • Adjust to install a 240mm radiator at the rear side

Radiator & cooling support

LIAN-LI-O11VX-Tower-Black-Case- \(17\)

Remove the bottom fan bracket
LIAN-LI-O11VX-Tower-Black-Case- \(18\)

Remove the side fan bracket
LIAN-LI-O11VX-Tower-Black-Case- \(19\)

Remove the dust filters

Graphic card anti-sag bracket installation

LIAN-LI-O11VX-Tower-Black-Case- \(21\)

  • Installed on ATX motherboard

  • Installed on ATX motherboardLIAN-LI-O11VX-Tower-Black-Case- \(22\)

  • Cable management

  • Cable holder installation
    LIAN-LI-O11VX-Tower-Black-Case- \(23\)

  • Cable holder installation

    • Keep the big cables in the cable holders
    • Hold the small cables with the velcro straps
    • Remove the velcro strap to place a controllerLIAN-LI-O11VX-Tower-Black-Case- \(24\)

Hardware clearance

  • CPU height clearance
  • PSU clearance

LIAN-LI-O11VX-Tower-Black-Case- \(25\)

  • PSU clearance
  • PSU clearanceLIAN-LI-O11VX-Tower-Black-Case- \(26\)
  • Radiator and fan combo height clearance

http://www.lian-li.com
G50.O11VX.01

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

LIAN LI User Manuals

Related Manuals