Zigbee LZWSM16-2 Gang Light Switch User Manual

: June 29, 2024
: zigbee

Table of Contents

Zigbee LZWSM16-2 Gang Light Switch
Technical Specifications
Installation
FAQ
Warranty Conditions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Zigbee LZWSM16-2 Gang Light Switch

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Technical Specifications

Product type 2Gang Zigbee Switch Module No Neutral
Voltage AC200-240V 50/60Hz
Max. load 2x (10-100W)
Operation frequency 2.405GHz-2.480GHz IEEE802.15.4
Operation temp. -10°C + 40°C
Protocol Zigbee 3.0
Operation range <100m
Dims (WxDxH) 39x39x20 mm
Certificates CE ROHS

Global international operation Whenever & Whenever You are, All-in-on Mobile App.

Inhouse local operation

Installation

Warnings:

Installation must be carried out by a qualified electrician in accordance with local regulations.
Keep the device out of reach of children.
Keep the device away from water, damp or hot environment.
Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted to abnormal operation of the device.
Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
Do NOT attempt to disassemble, repair or modify the device.

Function Introduction

Both the adjustment on App and switch can overwrite each other, the last adjustment remains in memory.
The App control is synchronized with the manual switch.
Manual switching interval greater than 0.3s.
You can select the switch type on the APP (Please use this function in wired gateway).
Warnings : Do not connect the neutral line, Otherwise it will be permanently damaged.

Wiring Instructions and Diagrams

Turn off the power supply before carrying out any electrical installation work.
Connect wires according to the wiring diagram.
Insert the module into the junction box.
Turn on the power supply and follow switch module configuration instructions.
If the light flashes after turning off, please connect the accessories.

FAQ

Q1: What should I do if I can’t configure the switch module?

Please check whether device is powered on.
Make sure the Zigbee Gateway is available.
Whether it’s in good internet conditions.
Make sure the password entered in App is correct.
Make sure the wiring is correct.

Q2: What device can be connected to this Zigbee switch module?
Q3: What happens if the WIFI goes off?

Most of your household electrical appliances, such as lamps, laundry machine, coffee maker, etc. You can still control the device connected the switch module with your traditional switch and once WIFI is active again the device connected to module will connect automatically to your WIFI network.

Q4: What should I do if I change the WIFI network or change the password?

You have to re-connect our Zigbee switch module to the new WI-FI network accordingly as per the App User.

Q5: How do I reset the device?

Switch on/off the traditional switch for 5 times until the indicator light flash.
Press the reset key for about 5 seconds until the indicator light flash.

APP User Manual

Scan the QR code to download Tuya Smart APP / Smart Life App, or you can also search keyword “Tuya Smart” and “Smart Life” at App IOS APP / Android APP Store or Googleplay to download App.

Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or mail box, then set your login password. Click “Create Family” to enter into the APP.

Before making the reset operation, please make sure the Zigbee Gateway is added and installed to the WIFI network. Ensure that the product is withing the range of Zigbee Gateway Network.

After the wiring of switch module is done, press the reset key for about 10 seconds or turn on/off the traditional switch for 5 times until the indicator light inside the module is flashing quickly for pairing.

Click “+” (Add sub-device) to select the suitable product gateway and follow the on-screen instruction for paring.

The connecting will take about 10-120 seconds to complete depending on your network condition.

Finally, you can control the device via your mobile phone.

System Requirements

WIFI Router
Zigbee Gateway
iPhone, iPad (iOS 7.0 or higher)
Android 4.0 or higher

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.