ecler ePRS10Ti Public Address Loudspeaker User Manual
- June 28, 2024
- ecler
Table of Contents
ePRS10Ti Public Address Loudspeaker
Specifications
- Model: ePRS10Ti / ePRS20Ti
- Type: Specialized Loudspeakers
- Application: Public Address Loudspeaker
- Power Options @ 100V: ePRS10Ti – 10W, ePRS20Ti – 20W
- Power Options @ 70V: ePRS10Ti – 5W, ePRS20Ti – 10W
- Frequency Response: -3dB
- Coverage Angle: Wide
- Sensitivity: 1W/1m
- IP Rating: IP55
- Material: Reinforced ABS
- Color: Various
- Operating Conditions: Indoor and Outdoor
Product Usage Instructions
1. Important Safety Instructions
Before using the loudspeaker, ensure you read and follow these
safety instructions:
- Read and keep the user manual for reference.
- Avoid using near water sources.
- Clean with a dry cloth only.
- Ensure proper ventilation around the loudspeaker.
- Avoid placing near heat sources.
- Do not modify the plug for safety purposes.
2. Connecting
2.1 ePRS10Ti:
To select power options for 70/100V line, wire the connections
following the color code:
- WHITE: 10W @100V, 5W @70V
- GREEN: 5W @100V, 2.5W @70V
- RED: 2.5W @100V, 1.25W @70V
- BLACK: COM
2.2 ePRS20Ti:
To select power options for 70/100V line, use the following
color code:
- WHITE: 20W @100V, 10W @70V
- GREEN: 10W @100V, 5W @70V
- RED: 5W @100V, 2.5W @70V
- BLACK: COM
Note: Ensure correct power selection to prevent
performance issues.
3. Location and Installation
When installing the loudspeaker, consider the following:
-
Avoid obstacles between the loudspeaker and the audience for
optimal sound projection. -
High frequencies are directional, so ensure clear pathways for
sound transmission.
Frequently Asked Questions (FAQ)
Q: What should I do if I accidentally connect the loudspeaker
to a low-impedance amplifier in the wrong power setting?
A: If connected incorrectly, no damage will
occur to the loudspeaker, but its performance will be below
specifications. Ensure correct power settings to avoid this
issue.
Q: Can the loudspeakers be used outdoors?
A: Yes, the loudspeakers are IP55 certified and
made of durable materials suitable for outdoor use.
Q: How should I clean the loudspeakers?
A: Use a dry cloth to clean the loudspeakers.
Avoid using any liquid cleaning agents.
ePRS10Ti / ePRS20Ti
SPECIALIZED LOUDSPEAKERS
Public Address Loudspeaker
USER MANUAL
50-0337-0102
ePRSTi10-20
EN
INDEX
1. IMPORTANT REMARK………………………………………………………………………….. 3 2. IMPORTANT SAFETY
INSTRUCTIONS………………………………………………………. 4 3. IMPORTANT
NOTE………………………………………………………………………………. 6 4. INTRODUCTION
………………………………………………………………………………….. 6 5. MAIN SPECIFICATIONS
………………………………………………………………………… 6 6. CONNECTING………………………………………………………………………………………
7
6.1. ePRS10Ti:………………………………………………………………………………………… 7 6.2.
ePRS20Ti:………………………………………………………………………………………… 7 7. LOCATION AND
INSTALLATION……………………………………………………………… 7 8. TECHNICAL SPECIFICATIONS
…………………………………………………………………. 8 9. CONTENTS OF THE PACKAGE
………………………………………………………………… 8
2
1. IMPORTANT REMARK
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons. The exclamation point within
an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance. WARNING: To prevent fire or shock hazard, do not
expose this equipment to rain or moisture. WARNING: An apparatus with Class I
construction shall be connected to a mains socket-outlet with a protective
earthing connection.
3
2. IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings.
4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean
only with dry cloth. 7. Do not block any ventilation openings. Install in
accordance with the
manufacturer’s instructions. 8. Do not install near any heat sources such as
radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat. 9. Do not defeat
the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the
apparatus. 11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightening sorts or when unused for long
periods of time. 13. Refer all servicing to qualified personnel. Servicing is
required when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped. 14. Disconnecting from mains: Switching
off the POWER switch all the functions and light indicators of the amplifier
will be stopped, but fully disconnecting the device from mains is done
unplugging the power cord from the mains input socket. For this reason, it
always shall remain readily operable. 15. Equipment is connected to a socket-
outlet with earthing connection by means of a power cord. 16. The marking
information is located at the bottom of apparatus. 17. The apparatus shall not
be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on apparatus.
4
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
WARNING: This product must not be discarded, under any circumstance, as
unsorted urban waste. Take to the nearest electrical and electronic waste
treatment centre.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be
caused to people, animal or objects due to failure to comply with the warnings
above.
5
3. IMPORTANT NOTE
Congratulations. You now possess the result of careful design and meticulous
manufacturing. We are very grateful for your trust in purchasing our Public
Address Loudspeaker ePRS10Ti / ePRS20Ti. In order to obtain maximum
effectiveness and performance, it is VERY IMPORTANT, prior to connection, to
carefully read and to take into account the instructions given in this manual.
To guarantee optimum operation, we recommend that all maintenance be carried
out by our authorised Technical Services.
4. INTRODUCTION
ePRS10Ti and ePRS20Ti are public address loudspeaker respectively, carefully
selected for the most widespread 70/100V applications: paging and background
Music. They offer durability and an optimal voice and music reproduction. Made
of reinforced ABS and IP55 certified, ideal for high performance outdoors.
5. MAIN SPECIFICATIONS
· Water-resistant ABS public address loudspeaker · ePRS10Ti (power options):
o 10W / 5W / 2,5W @ 100V o 5W / 2,5W / 1,25W @ 70V · ePRS20Ti (power options):
o 20W / 10W / 5W @ 100V o 10W / 5W / 2,5W @ 70V · IP55 certification ·
Connection by bare wire · Finished in white (RAL 9016)
6
6. CONNECTING
6.1. ePRS10Ti:
The power selection for 70/100V line is made by wiring the connection
according to the following colour code:
WHITE GREEN
RED BLACK
@100V 10W 5W 2,5W COM
@70V 5W 2,5W
1,25W COM
6.2. ePRS20Ti:
The power selection for 70/100V line is made by wiring the connection
according to the following colour code:
WHITE GREEN
RED BLACK
@100V 20W 10W 5W COM
@70V 10W 5W 2,5W COM
Note: if the loudspeaker is used in 70V installations, the corresponding
powers for the 100V position will be reduced to half those indicated on the
switch. To one quarter for 50V installations.
WARNING! If the system is accidentally connected with the switch in the 100
V/60 W position to a low-impedance amplifier, no damage will be caused to the
loudspeaker, but its performance will be well below its specifications.
7. LOCATION AND INSTALLATION
In general, the following rules will be followed:
· The unit must always be installed on firm, solid surfaces. · Ensure that the
surface on which the loudspeaker is to be installed can
withstand its weight. · Always use a safety cable to secure the loudspeaker
installation. · For good sound reproduction, there must not be any obstacles
between the
loudspeaker and the audience.
High frequencies, unlike bass frequencies, are extremely directional and any
obstacle will involve attenuation in their response.
7
8. TECHNICAL SPECIFICATIONS
ePRS10Ti
Drivers Power options @ 100V
Power options @ 70V Frequency response (-3dB)
Coverage angle Sensitivity 1W/1m
IP rating Finished color
Material Operating and storage conditions
Cord length Dimensions (Ø x L)
Weight
5″ 10W / 5W / 2,5W 5W / 2,5W / 1,25W 158 Hz-19 kHz 235°x235° (HxV) 90 dB
IP55 (IEC60529 Certified) White (RAL 9016) ABS + Aluminum grill Min -20ºC
(-4ºF); Max +60ºC (+140ºF) 350mm / 13.8″ Ø 138 x 205mm / Ø 5.4″ x 8.1″ 1,6 kg.
/ 3.5 lb. (including accessories)
ePRS20Ti
Drivers Power options @ 100V
Power options @ 70V Frequency response (-10dB)
Coverage angle Sensitivity 1W/1m
IP rating Finished color
Material Operating and storage conditions
Cord length Dimensions (Ø x L)
Weight
6.5″ 20W / 10W / 5W 10W / 5W / 2,5W 170 Hz-19 kHz 151°x151° (HxV) 96 dB IP55 (IEC60529 Certified) White (RAL 9016) ABS + Aluminum grill Min -20ºC (-4ºF); Max +60ºC (+140ºF) 350mm / 13.8″ Ø 170 x 245mm / Ø 6.7″ x 9.6″ 1,8 kg. / 4.0 lb. (including accessories)
9. CONTENTS OF THE PACKAGE
· ePRS10Ti or ePRS20Ti · User’s quick guide · Warranty card
8
All product characteristics are subject to variation due to production
tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or
improvements in the design or manufacturing that may affect these product
specifications. For technical queries contact your supplier, distributor or
complete the contact form on our website, in Support / Technical requests.
Motors, 166-168 | 08038 Barcelona, Spain | Tel. (+34) 932238403 |
information@ecler.com | www.ecler.com
9