UNITED B6771C8C48DA Studio Technologies Replay Box Instruction Manual
- June 27, 2024
- UNITED
Table of Contents
Replay Box
DUAL TRANSFORMER
REAMPLIFICATION BOX
Quick Start Guide
REGISTER YOUR PRODUCT
Before we begin, please take the time to visit
www.unitedstudiotech.com to register your
product.
To ensure you receive proper and uninterrupted warranty support for your
product, please register your unit within 14 days from purchase.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions
- Keep these instructions
- Heed all warnings
- Follow all instructions
- Clean only with dry cloth
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat
- Protect the power cord from being walked on or pinched particularly at plugs and the point where they exit from the apparatus
- Only use attachments/accessories specified by the manufacturer
- Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally , or has been dropped
- CAUTION: To disconnect the unit completely from the MAINS, unplug the unit. Turning the power switch off does not disconnect the unit completely from the MAINS.
- The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the unit.
- WARNING: This is a Class | apparatus. It should be connected to a MAINS socket outlet with a protective earthing connection.
- This equipment design typically applies to commercial or industrial equipment expected to be installed in locations where only adults are normally present.
WARRANTY STATEMENT
United warranties this product to be free from defect in materials and
workmanship for one year from date of purchase, for the original purchaser to
whom this equipment is registered. This warranty is non-transferable.
This warranty is void in the event of damage incurred from unauthorized
service to this unit, or from electrical or mechanical modification to this
unit.
This warranty does not cover damage resulting from abuse, accidental damage,
misuse, improper electrical conditions such as mis-wiring, incorrect voltage
or frequency, unstable power, disconnection from earth ground {for products
requiring a 3 pin, grounded power cable), or from exposure to hostile
environmental conditions such as moisture, humidity, smoke, fire, sand and
other debris, and extreme temperatures.
United will, at it’s sole discretion, repair or replace this product in a
timely manner. This limited warranty extends only to products determined to be
defective and does not cover incidental costs such as equipment rental, loss
of revenue, etc. Please visit us at
www.unitedstudiotech.com for more
information on your warranty, or to request warranty service.
This warranty applies to products sold in the United States of America. For
warranty information in any other country, please refer to your local
distributor for United Studio Technologies. This warranty provides specific
legal rights, which may vary fromm state to state. Depending on the state in
which you live, you may have rights in addition to those covered in this
statement. Please refer to your state laws or see your local retailer for more
information.
HARDWARE CONTROLS
-
Color Switch – Selects which transformer converts the signal to affect tone color.
-
Phase Inversion Switch – Engages an 180° phase inversion on the output.
-
Ground Lift Switch – Engages the ground lift, isolating output ground from chassis ground.
Useful for reducing hum caused by ground loops. -
Level Control – Adjusts the output level from infinity (mute) to +4dB above source input.
-
Input XLR – Balanced +4 dB line level input signal.
-
Thru/Input|1/4” TS – Balanced +4 dB ‘convenience’ TRS input. Also works as a through-put to daisy chain another device.
-
Output 1/4” TS – Unbalanced, transformer isolated instrument output.
CONNECTIONS AND OPERATION
Connect a channel output from your interface or recorder into the line input
of the Replay Box.
Connect an instrument cable from the Output of the Replay box to your
destination amplifier, pedal, or processor. Start with the volume control
down, then adjust the volume knob up to the desired level.
For a clean, mastering-grade signal, set the Color switch to Transparent. When
a subtle amount of coloration is desired, set the Color switch to Harmonic.
This provides low saturation, slight high-end roll off, and some phase shift
at the extreme ends of its frequency range (similar to the “Pulte clow-end
trick.”)
Replay Box recipes:
Pedalboard interface: Set Color to Transparent to interface your studio
with guitar pedals — the possibilities are endless for processing any of your
recorded tracks.
Replayed snare drum: Snare needs more distortion or “crack?” Send your snare
track through a guitar amplifier with some overdrive, and mic the arp.
Set up the amp in a large reflective room… and mic the room as well for an
even bigger sound!
Replayed synthesizer: Are your software/MIDI synth sounds missing some
dimension? Send them through a full-range keyboard amp via the Replay Box and
mic the room. (Bonus points for micing in stereo!) This classic trick has been
used on countless albums.
TECHNICAL SPECIFICATIONS
Input Impedance| Transparent Mode: 300 Ω
Harmonic Mode: 50 Ω
---|---
Output Impedance| Transparent Mode: 1kΩ
Harmonic Mode: 150Ω
Frequency Response| Transparent Mode: 20hZ-20KhZ +/-0.5dB
Harmonic Mode: 40hZ-20KhZ +/-0.5dB
Output Gain Level| Transparent Mode: +3dB above Input Level
Harmonic Mode: +5dB above Input Level
Recommended Input| +4 Line Level Balanced Input
Auxiliary Controls| Phase Inverse, Ground Lift
Dimensions| Height (w/o feet): 52mm /2″
Height (w/o feet): 46mm /1.8
Width: 148mm / 5.2″
Depth: 155mm / 6.1″
As a commitment to constant improvement, United reserves the right to change any specifications, at any time, without notification.
GET THE FULL STORY
Get the history of the product, tips and tricks, and more by downloading our full manual at www.unitedstudiotech.com. As part of our green initiative, we have chosen to include this short-scale manual to reduce paper waste.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>