TrueLife TLNCR7DS Nanny Camera R7 Dual Smart Instruction Manual

TrueLife TLNCR7DS Nanny Camera R7 Dual Smart

Specifications

• Product Name: NannyCam R7 Dual Smart
• Box Contents: Camera (baby unit), Display (parent unit)
• Features: Night light, MicroSD card slot, Micro USB port, Wall
  mounting, Charging status LED, Antenna, SD card slot

Product Layout

Camera (baby unit)

1. Microphone
2. CALL/PAIR button
3. Night light
4. MicroSD card slot
5. Speaker
6. Micro USB port
7. Reset button
8. Wall mounting

Display (parent unit)

1. Microphone
2. Charging status LED
3. CALL button
4. BACK button
5. Antenna
6. ON/OFF button
7. Speaker
8. Base
9. SD card slot
10. Reset button
11. Micro USB port

Where to Place the Unit

1. On a horizontal and solid surface.
2. On a vertical surface:
   • Use the included mount marked with the correct side up.
   • Screw the mount onto a solid, clean, and flat surface.
   • Snap the bottom of the camera into the mount securely.
3. Using the tripod thread:
   • Secure the TrueLife NannyCam Holder at the chosen location.
   • Screw the camera onto the thread.

Pairing the Camera to the Parent Unit

1. Ensure the camera and parent unit are close to each other.
2. Follow the steps provided in the manual for pairing and unpairing the devices.
3. To pair a second camera, repeat the pairing process and select “Camera 2.”

Pairing with the App

1. Download the app by scanning the QR code or visiting the provided URL.
2. Register or log in with your existing account following the instructions in the app.

Frequently Asked Questions

Q: Can I pair multiple cameras with a single-parent unit?

A: Yes, you can pair multiple cameras with the same parent unit. Simply follow the pairing process for each additional camera.

Q: How do I reset the camera or parent unit?

A: To reset the camera or parent unit, locate the reset button on the device and press it according to the instructions provided in the manual.

Q: What should I do if I encounter connectivity issues between the camera and the parent unit?

A: If you experience connectivity problems, try unpairing and re-pairing the camera with the parent unit following the steps outlined in the manual.

INSTRUCTIONS

BOX CONTENTS

• Camera (baby unit)
• Parent unit
• 2× Micro USB cable + 2× adapter
• Accessories for wall mounting
• Reset pin
• Instructions
• Safety instructions

PRODUCT LAYOUT

Camera (baby unit)

1. Status LED
   • a. Red light (ashing) – waiting to pair
   • b. Blue light (steady) – camera connected
   • c. Red light (steady) – connection problem
2. Microphone
3. CALL/PAIR button
4. Night light
5. MicroSD card slot
6. Speaker
7. Micro USB port
8. Reset button
9. Wall mounting

Display (parent unit)

1. Microphone
2. Charging status LED
   • a. Orange light – charging
   • b. Green light – fully charged
3. Power-on status LED
   • a. Orange light – the device is on
4. ZOOM button
5. MENU button
6. DIRECTION buttons
7. OK button
8. CALL button
9. BACK button
10. Antenna
11. ON/OFF button
12. Speaker
13. Base
14. SD card slot
15. Reset button
16. Micro USB port

WHERE TO PLACE THE UNIT

1. On a horizontal and solid surface
2. On a vertical surface
   • a. Use the included mount. It is marked which side is up.
   • b. In the box, you will and a set of screws and plugs to screw the mount onto a solid, clean, and flat surface.
   • c. Once the mount is Firmly attached, snap the bottom of the camera into it and make sure it is secure.
3. Using the tripod thread
   • a. Place and secure the TrueLife NannyCam Holder (sold separately) to the chosen location.
   • b. Screw the camera onto the thread.

PAIRING THE CAMERA TO THE PARENT UNIT

The camera and parent unit should already be paired out of the box, so you just need to turn them both on. If this connection fails, you can easily pair the two devices using the steps below.

Pairing:

1. When pairing, place the camera and parent unit as close as possible to each other.
2. Press the MENU button, use the ARROW buttons to move to the settings icon , and confirm with the OK button. In settings, navigate to the camera icon and confirm again.
3. Select Camera 1.
4. Hold the CALL/PAIR button on the camera for about 5 seconds until you hear a beep.
5. Press the OK button on the parent unit.
6. Pairing is confirmed by a blue LED on the camera and a notification on the parent unit.

Unpairing:

If connection problems exist between the camera and the parent unit, you can unpair and re-pair the camera.

1. Press the MENU button, use the ARROW buttons to move to the settings icon , and confirm with the OK button. In settings, navigate to the camera icon and confirm again.
2. Select Camera 1.
3. Long press the OK button and the camera will disconnect from the parent unit.
4. Repair the camera and parent unit using the steps described above.

Pairing a second camera:

It is possible to purchase a second camera and pair it with the same parent unit. The pairing process is the same, simply select „Camera 2″ during the pairing process.

PAIRING WITH THE APP

The camera can be paired with the parent unit and the smartphone app at the same time.

1. Download the app
   • Scan the QR code or enter the URL: truelife.eu/57714/app
2. Register or log in with your existing account

a) Sign up

1. If you don’t have an account in the app yet, press Sign Up. Select your country/region and fill in your email address. Please read the Privacy Policy carefully and check the I Agree box.
2. Next, press Get Verification Code and write down the six-digit code you receive in your email inbox.
3. Now set your password (6-20 characters with a combination of letters and numbers) and press Done.
   • Note: The code is only valid for 60 seconds. If you have not used it within that time, press Resend and fill in the code again. If you do not receive the code again, check your email spam folder.

b) Sign in with an existing account

1. If you already have an account in the app, press Login. Select country/region, fill in your email address, and enter your password.

Adding a device to the app

1. Press Add Device.
2. In the left column, select Camera & Lock and press Smart Camera (Wi-Fi).
3. If you already have the camera paired with the parent unit, you now need to reset it using the reset button on the back of the camera (at this point the parent unit will lose signal – it will reconnect after a while).
   • Hold the button for about 5 seconds until you hear a beep and the camera status LED turns red and starts flashing.
4. In the app, confirm that the camera indicator is flashing and press Next. Select your home Wi-Fi (2.4GHz), enter the Wi-Fi password and press Next.
   • Note: The app requires location access to pair properly.
5. A QR code will be displayed in the app. Hold it in front of the camera lens at a distance of 15 to 20 cm.
   • When pairing is successful, you will hear a beep and the camera’s status light will flash blue. Press I Heard a Prompt and wait until the pairing is complete which you will see in the app.
6. When it is completed, press Done. The camera is now ready to use.

ROTATING THE CAMERA

• Remotely control and rotate the camera at any time, using either the parent unit or the smartphone app. Just wake up the parent unit by pressing the ON/OFF button and use the DIRECTION buttons to rotate the camera in any direction.
• Note: If you are using two cameras, the main screen will be split into two parts. One of the cameras must be selected first. Select one of the cameras by pressing the ZOOM button and confirm with the OK button.

TAKING PHOTOS AND VIDEOS

• To take photos or videos, a microSD card (not included) is required. The card can be inserted either in the camera (baby unit) or the parent unit. The card must be formatted in FAT32 format for proper functionality.
• The maximum supported card size is 128 GB. We recommend using a microSD card with at least Class 10 / UHS-1 parameters.
• a. If you insert a microSD card into the camera, the recording is controlled via the app, and the recording will be captured in the phone gallery and the card at the same time.
• b. If you insert a microSD card into the parent unit, the recording is controlled via the parent unit and the recording will be made to the card in that unit.

TRUELIFE SMARTCARE®

The baby monitor features TrueLife SmartCare®, which alerts you (via a notification on the unit/phone display and with an audible signal) to motion, noise, and crying. To turn on these features and set them up, follow these steps:

1. Press the MENU button on the main screen select the settings icon and confirm with the OK button.
2. Find the Smart Care icon in the menu and confirm.
3. In the Alarm Type section, you can individually turn on the following options and set how sensitive the baby monitor will respond to each stimulus:
   • a. Motion detection
   • b. Noise detection
   • c. Cry detection
4. In the Reminder Method section, then choose the method in which you want to receive notifications.

VOX MODE (SLEEP MODE)

To extend battery life, you can set a power-saving VOX mode for the parent unit.

1. Press the MENU button select the settings icon on the main screen and confirm with the OK button.
2. Find the Sleep Mode icon in the menu and confirm.
3. Here you can choose one of three modes:
   • a. Sound off (the parent unit will not transmit sound after the display turns off)
   • b. Sound on (the parent unit will transmit sound after the display turns off)
   • c. Always on (parent unit display and sound will remain on)
   • d. You can also set the time after which the parent unit enters sleep mode (1 minute / 5 minutes / 10 minutes / 30 minutes / 60 minutes).

• Note: When the camera is off, insert the card (see Product Layout – Camera (baby unit) section) and format the card under settings before recording.
  In the settings, you can also choose whether the camera will record to the card constantly or only when motion is detected.

SECURITY AGAINST HACKING

• The app uses five-layer security technology to ensure the security of smart devices without the risk of information being compromised: military-grade AES data encryption, triple-check authorization and authentication, two-code dynamic key, and HTTPS channel encryption guarantee the security of network traffic.
• Note: To increase protection against hacking, set the strongest possible password on your Wi-Fi network.
• The password should consist of at least eight characters with a combination of uppercase and lowercase letters and numbers. Do not use special characters *„~!@#$%^”,** otherwise the camera will not be able to pair.
• Transmission between the camera and the parent unit is carried out wirelessly via the encrypted Wifi standard 802.11ah sub-1 GHz.

RANGE

• The maximum range of the baby monitor is 300 m in an open area and 50 m in a building.
• The maximum range of the baby monitor and signal transmission can be affected by the environment in which you use the baby monitor, such as thick walls, reinforced concrete structures, etc.
• If the connection is lost due to being too far away from the baby unit, the parent unit will indicate this on the display with a red disconnected icon.

TROUBLESHOOTING

SPECIFICATIONS

TrueLife NannyCam R7 Dual Smart

• Viewing angle 110°
• Horizontal camera rotation 345° (allows 360° viewing)
• Vertical camera rotation 60° (allows 165° viewing angle)
• Automatic night vision Yes (visibility up to 10 meters)
• Video format MP4 / H.264 compression
• WiFi 2.4 GHz
• Video resolutio n 2K (2304 × 1296), HD (1280 × 720)
• Max. microSD card capacity 128 GB
• Power input MicroUSB
• Power consumption 5V / 1A
• Battery 3000 mAh (rechargeable)
• Dimensions – Camera (baby unit) 85 × 80 × 155 mm
• Dimensions – Parent unit 81 × 17 × 156 mm
• Weight – Camera (baby unit) 286 g
• Weight – Parent unit 191 g
• Compatible OS iOS 9 or later / Android 5 or later

SAFETY WHEN WORKING WITH THE DEVICE

1. Carefully read the enclosed safety instructions.
2. For proper handling of the product, download and read the latest version of the manual, which can be found at www.truelife.eu

• Printing errors and changes to information reserved.
• Manufacturer: elem6 s.r.o., Braškovská 15, 16100 Prague 6, Czech Republic

References

• truelife.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>