crkd CK24ND Handheld Controller Nitro Deck User Guide

crkd CK24ND Handheld Controller Nitro Deck User Guide

Product Using Instruction

SAFETY

• Avoid prolonged use of this product. Take a break at about 30-minute intervals.
• Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms during use. If the condition persists consult a doctor.
• This product is intended for use with your hands only, do not bring it into close contact with your head, face or the bones of any other part of the body.
• The vibration function of this product can aggravate injuries, do not use the vibration function if you have any ailment or injury to the bones, joints or muscles of your hands or arms.
• Never disassemble or modify the product.
• Do not expose the product to high temperatures, high humidity or direct sunlight.
• Do not allow the product to come into contact with liquids.
• Do not put heavy objects on the product. Do not throw or drop the product or subject it to strong physical shock.
• Do not touch the ports or insert any foreign objects into them.
• SMALL PARTS Not for children under 3 years.

SETUP : Before attaching the switch to the Nitro Deck+, open Switch console settings and turn on Switch Pro Controller wired connection. From the Switch HOME Menu, select “System Settings” “Controllers and Sensors”, then turn on “Pro Controller Wired Communication”.

Remove the Joy-Con controllers and any cables from the Switch, Make sure the Joy-cons are powered OFF. Lineup the Switch with the Nitro Deck and slide carefully together until they dock. Keep the Switch straight while attaching. The Switch clicks into position and is held securely.

To remove the Switch, slide the lever on the back of the Nitro Deck as shown. Keep holding the lever in position and slide the Switch out.

CUSTOMER SUPPORT

If you have questions about setup or use, contact CRKD direct. The CRKD App includes informational support videos. Visit support on the web at crkd.gg/support. If you still need help, please contact our support team: support@crkd.gg

SPECIFICATIONS

Input Power Rating : DC 5V, 1.5A, Output Power Rating: DC 5 V, 0. 5 A, Operating Temperature: 5°C 35°C (41F-95F), Mass: 268g (9oz). Not including the Switch console. HDMI adapter (sold separately): USB-C to HDMI, HDMI adapter length (sold separately): 58 cm (23in), Wireless Connection: Bluetooth

LIMITED WARRANTY

CRKD warrants to the original consumer purchaser that product will be free from defects in materials and/or workmanship for the length of time specified in the warranty period from the date of purchase, this being 2 Years, as set forth at www.crkd.gg/warranty.

AUSTRALIAN WARRANTY

These goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased in Australia or New Zealand, this product comes with one year (12 months) warranty from date of purchase. Defects in the product must have appeared within one year from date of purchase, in order to claim warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s returns policy and procedures. Any expense incurred as a result of returning the product to the retailer of purchase is the full responsibility of the customer. Bluemouth Interactive, Level 2, 2 Darling Street, South Yarra, VIC 3141. Phone: (03) 9867 2666

COMPLIANCE STATEMENTS

FCC STATEMENT : This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note : This interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that -Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED STATEMENT:

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.

Go LLC hereby declares that this product follows the essential requirements and other provisions of EMC Directive 2014/30/EU and RED directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.crkd.gg/docs

The UKCA (UK Conformity Assessment) mark is a declaration from the manufacturer that the product meets applicable UK regulations for health, safety, and environment protection

The crossed-out wheeled bin symbol marked on this product signifies that it must not be disposed of with regular household waste and needs to be taken instead to an appropriate collection point.

The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable A C MA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (E M C)

2024 Freemode Go, LLC. All rights reserved. CRKD, NITRO and the CRKD logos are trademarks of Freemode Go, LLC. All other trademarks are owned by their respective owners. THIS PRODUCT IS NOT ENDORSED OR LICENSED BY NINTENDO

SCAN FOR USER MANUAL

UK AUTHORIZED REPRESENTATIVE FREEMODE GO LTD Unit 19 Hither Green Industrial Estate, Clevedon, Somerset, BS21 6XU. UK Email : Support@bluemouth.com.au.
Visit : www.bluemouth.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>