Shangruisi H20-PRO TWS Bluetooth Earbuds User Manual
- June 27, 2024
- Shangruisi
Table of Contents
Shangruisi H20-PRO TWS Bluetooth Earbuds
Specifications
- Product Model: H20-PRO
- Version: 13
- Charging: Press and hold 5S or put into the charging bin to charge
- Functions: Answer/hang up, Access denial, Voice assistant, Previous song, Next song
- FCC Compliance: Part 15 of FCC Rules
Product Usage Instructions
Charging
To charge the device, press and hold the button for 5 seconds or place it
in the charging bin.
Answer/Hang Up:
To answer or hang up a call, double click either the left (L) or right (R)
earbud.
Access Denial
To deny access, long press the button on the left (L) or right (R) earbud.
Voice Assistant
Activate the voice assistant by performing three strikes on the left (L) or
right (R) earbud.
Music Control
- Previous Song: Double click the left (L) earbud.
- Next Song: Double click the right (R) earbud.
FCC Compliance
This device complies with Part 15 of the FCC Rules. It must not cause harmful
interference and must accept any interference received. Any changes or
modifications not approved may void the user’s authority to operate the
equipment.
For RF exposure safety, reorient or relocate the receiving antenna, increase
separation between equipment and receiver, and consult a professional for
assistance.
The device meets general RF exposure requirements and can be used in portable
exposure conditions without restrictions.
FAQ
-
Q: How do I charge the device?
A: Press and hold for 5 seconds or place it in the charging bin to charge. -
Q: How do I activate the voice assistant?
A: Perform three strikes on either the left (L) or right (R) earbud.
Product Description:
- Mode:H20-PRO
- Bluetooth 5.3
- Impedance: 320
- Speaker diameter: 13 mm
- Wireles range: 10
- Meters The earphone battery: 35mAh
- Charging case: 200mAh
- Battery charging time: 1-2 Hours
- Work time over 4-5 Hours
Featurtes
Remarks: The product is updated from time to time, and some functional operations will be changed due to different versions. Please refer to the actual operation.
Notes
- Please store and use this product in a normal temperature environment;
- Do not expose this product to rain or humid environment;
- Do not throw it to avoid product damage caused by falling;
- Do not disassemble, repair or modify this product by yourself;
- Do not use chemical solvents to wipe this product;
- Do not discard at will, or in high temperature (temperature higher than 60 degrees) and fire, so as not to cause danger!
- Bluetooth products are affected by the environment and distance, please do not get close to the large electromagnetic field interference and radiation environment.
- If the Bluetooth headset is not used for a long time, please fully charge it and charge it once a week to check the service life of the Bluetooth headset.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>