GNMN N26 True Wireless Earbuds User Manual

GNMN N26 True Wireless Earbuds

Customer Service

• Email: support@gnmn.tech
• WhatsApp: (+86) 1392 3490 475
• Web: www.gnmn.tech

Packing List

Product Overview

First-time use

• Prior to first use, please remove the blue insulation sticker.
• Fully charge both earbuds and charging case.
• Keep the charging port dry before charging
• Use the provided Type-C charging cable, or place the charging case on a wireless charger to get change

Warnings

• Keep away from liquids and extreme heat.
• Keep the earbuds out of children’s reach.
• Do not throw and drop the earbuds to avoid damage.
• Do not disassemble the earbuds, or make any modifications to the structure or any part of it.
• Please charge with a rated voltage charger.
• Low Battery Warning :
• Earbud LED Red light flashes once every 5 secs.
• Prompt sound “battery low” 5 times then power off

Charging Case

Battery indicator of Charging Case

Battery Indicator of Earbuds

Put the earbuds back into the box to charge’ the earbuds. The battery icons will flash when charging, will turn off after fully charged.

Features with NTC tempera control protection, N26 earbuds will not charge if the temperature reaches 45 degrees or higher. (Charging case will automatically protect themselves in that case.) It is recommended to stop charging (or disconnect wireless charging) firstly, recharge after the temperature drops below 45 degrees.

Wireless Charging Supported

We recommend you to use wireless charging pad (not included) with QI certificate.

Power On/Off

Automatically Power On/Off
Open the lid of the charging case and the earbuds will power on automatically. Put the earbuds into the charging case and close the lid, the earbuds will power off automatically.

Manually Power On
Press & hold either earbud for 3 secs, it will flash Blue light and then power on.

Manually Power Off
Turn off Bluetooth on your device first. Press & hold either earbud for 5 secs, it will flash Red light and then power off.

Note: The earbuds will automatically power off if there is no devices connected within 5 mins.

Bluetooth Connection

• Step 1 – Open the lid of the charging case, two earbuds will automatically power on and enter pairing mode. (The earbuds LED will flash Blue light, then turn to Red & Blue light alternately. You would hear the prompt sound “Power on – Pairing” if you wear the earbuds.)
• Step 2 – Activate the Bluetooth setting on your phone, search and connect “N26”. (You should hear a prompt sound “Connected” if you wear the Earbuds.)

Single Mode

• When on dual mode, put one earbud into the charging case.
• Only take one earbud out of the charging case and connect it

Other instructions

• Each time you use your earbuds, it will automatically connect to your last successfully connected device
• The earbuds will automatically power off if there is no devices connected within 5 mins.
• The fully charged charging case can work as a powerbank to recharge the earbuds for 3-4 times without being plugged into rower supply.

Factory Restore Setting

When should I reset?

When only one side play music.
When you can’t use the two earbuds together.
When both earbuds fail to pair with each other or occur connection related issues

How To Reset

1. Forget all’N26’from the Bluetooth menu of the device and deactivate the Bluetooth setting.
2. Tap both earbuds five times at the same time, then both earbuds LED flash Red & Blue lights simultaneously. Wait for 4 secs, one earbud’s light will turn off and the other earbud will flash Red & Blue lights alternately, which means the earbuds have been reset successfully.
3. Now turn on the Bluetooth on your device and reconnect the earbuds, they will work properly

Multi-Function Operations

Incoming Call

Voice Assistance
Note: in standby/non-play mode

Music Mode

Note: Prompt sound “Di” will be produced when the volume reaches the minimum or maximum level.

Specifications

Earbud (each)

• Model Name: N26
• Bluetooth Version: V5.1
• Support: HSP/HFP/A2DP/AVRCP
• Transmission Range: 33feet (without obstacle)
• Weight: 3.8g
• Size:40.316.518.5mm
• Battery Capacity: 40mAh
• Music Time: SH
• Phone Call Time: 4H

Charging Case

• Weight: 34.Sg
• Size: 59.951.325mm
• Charging Time: about 3H
• Battery Capacity: 400mAh
• LED Power Display: Yes
• Wireless Charging: Yes
• Charging Port: Type-C

Q&A

• Q: Why does the music cut in and out sometimes?
  A: Please make sure there is no obstacle between the earbuds and your device.
  Please make sure there is no Microwave oven/Wifi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
  Note: Keep the device and the earbuds as close as possible to ensure a more stable Bluetooth connection.

• Q: What should I do if the Earbuds stop charging?
  A: We advise you to charge the earbuds by using the supplied original charging cable.
  Please make sure the charging pins and charging points are clean & dry before charging.
  Please make sure the earbuds battery was run out if sometimes it can’t be charged properly.

• Q: How to contact our Customer service?
  A: Email : service@gnmn.tech (9 WhatsApp: ( +86) 1392 3490 475
  Web: (www.gnmn.techQ) Thank you very much for choosing us! If there is any issue with your N26, please don’t hesitate to contact us, we will reply within 24 hours and solve your problem 100%.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>