GNMN G17 Bluetooth Wireless Earbuds User Manual

GNMN G17 Bluetooth Wireless Earbuds

Customer Service
Email: service@gnmn.tech
WhatsApp: +86 1392 3490 475
ER Web: www.gnmn.tech

Packing List

• Charging Case *1
• Earbuds *1 Pair
• USB-C Cable *1
• Ear Tips *3 Pairs
• User Manual *1

Specifications

• Model Name: G17
• FCC ID: 2A58W-G17
• Bluetooth Version: V5.3
• Support: A2DP/HFP/AVRCP/SPP/PBAP/BDR/BLE
• Transmission Range: ≤33feet (without obstacle)
• Headphones Battery Capacity: 50mAh
• Charging Case Battery Capacity: 3.7V 600mAh / 2.22Wh
• Input: DC 5V m 1A
• Charging Port: USB-C
• Wireless Charging Support: Yes (Charging pad not inclued)
• Music Time: 5H
• Phone Call Time: 4H
• Charging Time: about 1.5 H

Product Overview

Caution

1. Please remove the protective film before use, otherwise, the headphone will not be able to charge.

2. Choose suitable ear tips & Wear them correctly to enhance sound quality.
   

3. Please clean the magnet charging contact on the earbud and charging pin on the charging case with alcohol wipes if the headphones can’t be charged.

4. Please clean the protective grille of both earbuds if the sound becomes low.

How to Charge?

Charge by USB-C cable
Place earbuds into the charging case properly, then use the included USB-C charging cable to connect the charging case, and plug the other end intopower supply with a 5V/1A adapter (not included), they will start charging.

Wireless Charging

• Place the charging case on a wireless charging pad, it will start charging.
• If the charging case doesn’t start to charge, please try to reposition it.

(We recommend you use a wireless charging pad with a QI certificate.)

Note

1. If the earbud’s battery is lower than 10% (and the voltage is below 3.4V), you will hear the voice prompt “battery low” four times and then “power off” in turns.
2. The fully charged charging case can recharge twin earbuds for 2-3 times without being plugged into the power supply.

LED Power Display

•  Show the remaining battery percentage of the charging case from 0-100. “0” means the charging case needs charging while “100” means the charging case is fully charged.
•  Flash down and up when the earbud is charging; Stop flashing when the earbud is fully charged.
• Earbud’s LED light: Red light up means “being charged”, and Red light goes off means “fully charged”.

Power On/Off & Pairing

Automatically Power On/Off & Pairing
Prior to first use (or not in use for a long time), please charge both earbuds and charging case fully.

1. Take twin earbuds out of charging case, they will automatically power on and enter pairing mode.

2. Activate the Bluetooth setting on your phone, search and connect “G17”
   Note : If the earbuds are not connected to your device over 5 minutes, the earbuds will power off automatically.

3. Put the earbuds back into charging case, they will disconnect & power off automatically.

Manually Power On/Off
If the earbud is out of the charging case and powered off, then press & hold it for 2s, and it will power on.

Disconnect the Bluetooth with your device, press & hold either earbud for 5s, and both earbuds will power off at the same time.

For Second Time Use
If the headphones have already connected with your device, and the Bluetooth setting of this device is on, the second time using, when you take out the earbuds from the charging case, they will connect with your device automatically.

Pair with Other Devices

• G17 headphones bluetooth has a memory function, it usually auto connects with the last paired device.
• Thus, if you want to pair them with other devices, you should disconnect “G17” from the last paired device, and forget the pairing record on the last device.
• Then try to connect it to a new device, it should work properly.

Mono Mode (Only Left/Right Earbud is being Used)
You can use one earbud alone, and leave another earbud in the charging case.

• When in Dual mode, put one earbud into the charging case.
• Or only take one earbud out of the charging case, then search & connect “G17” on your device.

Factory Restore Setting

When should I reset it?

• When only one side plays music.
• When you can’t find “G17” on the device.
• When both earbuds fail to pair with each other or occur connection-related issues.

How to reset it?

• Delete the “G17” record from the Bluetooth menu on your device and deactivate the Bluetooth setting.

• Make sure the charging case has power or is being plugged into a power supply.

• Insert both earbuds into the charging case to get charged.

• Quick-click on both earbuds 5 times simultaneously to clean the pairing record with the last paired device.
  (* During this period, both earbuds’LED will flash Red & Blue light 3 times, then turn to Red light to get charged again.)

• Now turn on the Bluetooth setting on your device, search and connect the earbuds, they will work properly.

Multi-Function Operations

For Call

Answer Call| Click Once on L/R earbud
End Call| Click Once on L/R earbud
Reject Call| Long Press 2s on L/R earbud

Voice Assistance

Siri| Quick Triple- Click on L/R earbud

(* Must in non-music mode or standby mode}

Music Mode

Play/Pause| Click Once on L/R earbud
Next Track| Quick Double- Click on R earbud
Last Song| Quick Double- Click on L earbud
Volume+| Long Press & Hold on R earbud
Volume –| Long Press & Hold on L earbud

(* In single mode, R Earbud only supports the next song and Volume+, L Earbud only supports previous song and Volume-}

Note
Prompt sound ‘Di’ will be produced when the volume reaches the minimum or maximum level.

How To Sync Volume on Android?

To protect users from potential hearing damage, Android’s limiton max volume is quite low for Bluetooth audio devices .

If you feel the volume is too low, please access developer options and enable absolute volume,  so you’ll be able to max the volume at your own volition and to the full capabilities of your Bluetooth earphones. (Scan this QR code to watch a video to learn more details.)

Find Build Number Firstly

• Android 4.1 and lower: the Developer options screen is available by default
• Android 4.2 and higher: the Developer options in Android phones are hidden, you must enable this screen through Build Number.
• Android 7.1 and lower: Settings > About Phone > Build Number Android 8.0.0 and Android 8.1.0: Settings > System > About Phone > Build Number
• Android 9 and higher: Settings > About Phone > Build Number

Enable Developer Options
Locate the Build number and tap it about 7 times in succession to enable Developer options

You may also have to tap in developer options are activated, you will see a message that reads “You are now a developer” and your PIN for verification. Once

GO back to the Settings pane, and search Developer options as an entry. At the top of the Developer options screen, you can toggle the options as figure 1.

Enable Absolute Volume
Scroll down until you reach the Networking section. Once there, enable (toggle ON) the absolute volume options as Figure 2.

Note
These options in figure 2 may be different from the device you’re using. Typically, the choices depend on the type and model of the device you are working with.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

www.gnmn.tech
service@gnmn.tech

Thank you for purchasing the authentic product. For newer products, parts, and accessories,
please visit: www.gnmn.tech
For any assistance please contact
Email: service@gnmn.tech

Frequently Asked Questions

What is GNMN G17 Bluetooth Wireless Earbuds?

GNMN G17 Bluetooth Wireless Earbuds are a pair of wireless earbuds that use Bluetooth technology to connect to audio devices such as smartphones, tablets, or computers. They provide a convenient and wire-free listening experience.

How do I pair the GNMN G17 Bluetooth Wireless Earbuds with my device?

To pair the GNMN G17 Bluetooth Wireless Earbuds with your device, make sure the earbuds are in pairing mode. Then, go to the Bluetooth settings on your device and select the earbuds from the list of available devices. Follow the on-screen instructions to complete the pairing process.

What is the battery life of the GNMN G17 Bluetooth Wireless Earbuds?

The battery life of the GNMN G17 Bluetooth Wireless Earbuds can vary depending on the usage and volume level. However, on average, they offer around 4-5 hours of playback time. The charging case that comes with the earbuds can provide additional charges and extend the total battery life.

Are the GNMN G17 Bluetooth Wireless Earbuds sweatproof or waterproof?

Yes, the GNMN G17 Bluetooth Wireless Earbuds are designed to be sweatproof, which makes them suitable for workouts and other physical activities. However, they are not fully waterproof, so they should not be submerged in water.

Do the GNMN G17 Bluetooth Wireless Earbuds have a built-in microphone?

Yes, the GNMN G17 Bluetooth Wireless Earbuds are equipped with a built-in microphone. This allows you to make and receive calls directly from the earbuds without needing to take out your phone.

Can I use the GNMN G17 Bluetooth Wireless Earbuds with voice assistants like Siri or Google Assistant?

Yes, the GNMN G17 Bluetooth Wireless Earbuds are compatible with voice assistants like Siri or Google Assistant. You can activate the voice assistant by using the designated touch controls on the earbuds.

How do I control the playback and volume on the GNMN G17 Bluetooth Wireless Earbuds?

The GNMN G17 Bluetooth Wireless Earbuds have touch controls on both earbuds. You can tap or swipe on the earbuds to control playback, skip tracks, adjust volume, and answer or end calls. The specific touch gestures may vary, so it's recommended to refer to the user manual for detailed instructions.

Can I use only one earbud at a time with the GNMN G17 Bluetooth Wireless Earbuds?

Yes, you can use either the left or right earbud independently with the GNMN G17 Bluetooth Wireless Earbuds. This feature allows you to have mono audio or share one earbud with someone else while keeping the other ear free.

What is the Bluetooth version used in the GNMN G17 Bluetooth Wireless Earbuds?

The GNMN G17 Bluetooth Wireless Earbuds use Bluetooth 5.0 technology. This version provides a stable and efficient wireless connection with compatible devices.

Do the GNMN G17 Bluetooth Wireless Earbuds come with different ear tip sizes?

Yes, the GNMN G17 Bluetooth Wireless Earbuds usually come with multiple ear tip sizes included in the package. This allows you to choose the most comfortable fit for your ears, ensuring a secure and snug fit.

How do I charge the GNMN G17 Bluetooth Wireless Earbuds?

To charge the GNMN G17 Bluetooth Wireless Earbuds, place them inside the charging case and connect the charging case to a power source using the included USB cable. The earbuds will start charging automatically once connected.

Are the GNMN G17 Bluetooth Wireless Earbuds compatible with both Android and iOS devices?

Yes, the GNMN G17 Bluetooth Wireless Earbuds are compatible with both Android and iOS devices. They can connect to any device that supports Bluetooth connectivity, including smartphones, tablets, and computers.

Video – Overview Of Earbuds

Download this PDF Link:GNMN G17 Bluetooth Wireless Earbuds User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>