MR0004 Segway Navimow Robotic Lawn Mower User Guide
- June 26, 2024
- NAVIMOW
Table of Contents
- Package Contents
- STEP 01 Activate the Mower
- STEP 02 Find a Proper Location for the Charging Station and the Antenna
- STEP 03 Install the GNSS Antenna
- STEP 04 Check the GPS Signal
- STEP 05 Map out the Work Area
- STEP 06 Start Mowing
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
iseries
Quick Start Guide
Raccolta Carta
XXX CE.04.00.0945.00-C
Choose Life Without Boundaries
Package Contents
Navimow i Series
Welcome Card
Important Information
Quick Start Guide
User materials: welcome card, quick start guide, important information
Power supply
Extension cable for the power supply Pegs to secure the extension cable
Charging Station and the installation kit
Antenna kit
WARNING
Sharp edges. Do not point at people.
GNSS antenna
Extension cable for the GNSS antenna
Spare blades and bolts
Silicone pegs for marking the charging station
Use the silicone pegs to mark the location of the charging station when it is put in storage during the winter.
Navimow Access + (sold separately)
Sold separately. For 4G connectivity and Anti-theft.
STEP 01 Activate the Mower
STEP 02 Find a Proper Location for the Charging Station and the Antenna
STEP 03 Install the GNSS Antenna
STEP 04 Check the GPS Signal
If the light flashes yellow for more than 5min, please use the Satellite Signal Analyzer to relocate the antenna and return to STEP 2.
Solid red light indicates the charging station is unplugged.
STEP 05 Map out the Work Area
A. Map out the Boundary
NOTE: If you have more than one separate lawns, please repeat this step.
B. Set up Off-limit Island
C. Create a Passage to Link Separate Zones
D. VisionFence-off Zone
The VisionFence is off in this area
WARNING
If there is possible danger, press the STOP button immediately.
STEP 06 Start Mowing
You can now start mowing tasks or schedules, send the mower back to the charging station, and check mowing progress and battery status via the app. Basic operations can be done by pressing buttons on the mower.
Enter the PIN code before operating the mower. The default code is 0000. Press MOW or HOME to change the number and press OK to confirm the code.
Read the Quick Start Guide and the Important Information carefully before use
and keep for future reference.
Illustrations of the product, accessories, and app interface are for reference
purposes only. Actual product and functions may vary.
Go to navimow.segway.com for the complete User
Manual and other user materials.