QUIN 3INCH Multi Functional Portable Label Maker Instructions

QUIN 3INCH Multi Functional Portable Label Maker

M200 Instruction

Please read this instruction carefully before using this product and keep it properly.

Multilingual detailed instruction manual

Language switching
Click the “ button to select the language and click the button to switch the language.

Contains three languages: Japanese, German

Item Checklist

NOTE :The number of paper rolls in the list is subject to the actual shipment.

Product Specifications

Product Introduction – Parts and Features

Button functions

Parts Description

Main Menu – Settings

Paper Roll Installation

1. Slide down the Open-Cover Button to compartment cover
2. Remove the left disk and insert the label roll (with the printing side facing down) Insert the left disk and push it to the right.
3. Take out the paper holder inside the open the paper compartment
4.  After the label holder is complete, insert the holder into the paper compartment.
5. Pull out around 15 mm of paper and close the paper compartment cover.
6. Hold the Power Button for 3 seconds.
7.  Press the Eject Button once to detect . and reposition the label paper.
8. The label paper is repositioned once it comes out.

NOTE: On your first use or after you have replaced the label paper, the printer automatically ejects paper to reposition the label paper. This helps avoid printing errors (incomplete print, non-centered content, etc.).

App Download Method

NOTE

• You need to connect the printer through the Print Master app.
• In compliance with Google’s requirement, Android phones must enable GPS (Location Services) before using Bluetooth.

Method I : Use your phone to scan the QR code to install the App
Method II : Search for “Print Master” in the app store on your phone to download the App.

Connecting the Printer

1.  Turn on GPS.(Location Services)
2.  Open Print Master (Android phones only)
3. Tap the button to search for your device.
4. Press “Start using”

NOTE

• This product needs to be connected to the printer in the App after the Bluetooth is turned on.
• According to the official requirements of Google, Android mobile phones need to open the GPS permission before they can use the Bluetooth function.
• When connecting the App, please make sure that the printer is turned on and the Bluetooth of the mobile phone is turned on.

Identifying the Label Size
The App is required to set the label size or template before printing, Please follow the instructions to download it.

Method I : Check your label package
Method II:   Measure with a ruler

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed lo provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by timing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Caution
Radio Standards Specification RSS-Gen, issue 5-This device contains licence- exempt transmitter(s)/receivers) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS (s). Operation is subject to the following two conditions

This device may not cause interference.
This device must accept any interference, including interference that may cause ] undesired operation of the device.

RF exposure statement : The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Maintenance Card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>