AccuBoost ACC-060-SYS 120 Litre Unpumped Accumlator Tank Instruction Manual
- June 16, 2024
- AccuBoost
Table of Contents
AccuBoost ACC-060-SYS 120 Litre Unpumped Accumlator Tank
Product Information
Specifications :
- AccuBoost 60L (ACC-060-SYS)
- Length: 480mm
- Width: 457mm
- Height: 675mm
- AccuBoost 120L (ACC-120-SYS/TNK)
- Length: 480mm
- Width: 457mm
- Height: 1126mm
- AccuBoost 180L (ACC-180-SYS/TNK)
- Length: 557mm
- Width: 557mm
- Height: 1081mm
- AccuBoost 300L (ACC-300-SYS/TNK)
- Length: 557mm
- Width: 557mm
- Height: 1633mm
- AccuBoost 450L (ACC-450SYS / ACC-450TNK)
- Length: 651mm (SYS) / 621mm (TNK)
- Width: 635mm (SYS) / 621mm (TNK)
- Height: 1863mm
Installation Location:
Salamander Pumps’ AccuBoost models can be installed in different locations
depending on the model and size:
- AccuBoost 60L (ACC-060-SYS): It can be fitted inside a standard 500mm kitchen base unit.
- AccuBoost 120L (ACC-120-SYS/TNK): It can be fitted inside a 500mm larder style kitchen unit.
- AccuBoost 180L (ACC-180-SYS/TNK): It can be fitted inside a 600mm larder style kitchen unit. The back of the unit must be removed for this model to fit.
- AccuBoost 300L (ACC-300-SYS/TNK): It can be fitted inside a 600mm larder style kitchen unit. The back of the unit must be removed for this model to fit.
- AccuBoost 450L (ACC-450SYS / ACC-450TNK): This model requires special installation considerations. The base of the kitchen unit should be reinforced to withstand the maximum filled weight of the product. Alternatively, the base can be removed, and the vessel can be mounted on the floor. The dimensions of this model are provided above.
Product Usage Instructions
To use your AccuBoost effectively, please follow these instructions:
- Ensure that the AccuBoost is installed correctly in the designated location, as specified in the Installation Location section above.
- Connect the necessary plumbing connections to the AccuBoost according to your system requirements. Please refer to the plumbing diagram provided in the separate installation manual.
- Ensure that the power supply to the AccuBoost is properly connected and switched on.
- Adjust the settings on the AccuBoost control panel to meet your desired water pressure requirements. Please refer to the separate user manual for detailed instructions on how to operate the control panel.
- Once the AccuBoost is properly installed and configured, it will automatically boost the water pressure in your system, providing a consistent and reliable water flow.
- Regularly check the AccuBoost for any signs of damage or leaks. If any issues are detected, please consult the troubleshooting section of the user manual or contact Salamander Pumps’ customer support for assistance.
Frequently Asked Questions (FAQ):
- Q: Can I install the AccuBoost in a standard kitchen unit?
- A: Yes, most AccuBoost models can be installed inside standard kitchen units. However, please refer to the Installation Location section above for specific model requirements.
- Q: How do I adjust the water pressure on the AccuBoost?
- A: The AccuBoost control panel allows you to adjust the water pressure settings. Please refer to the separate user manual for detailed instructions on how to operate the control panel.
- Q: What should I do if I notice a leak or damage on my AccuBoost?
- A: If you detect any leaks or damage on your AccuBoost, please consult the troubleshooting section of the user manual for guidance. If further assistance is needed, please contact Salamander Pumps’ customer support.
AccuBoost models stored within a kitchen unit should have the base of the unit reinforced to withstand the maximum filled weight of the product, or the base removed and the vessel mounted on the floor.
*In order for these models to fit, the back must be removed from the unit.
Installation Location
-
AccuBoost 60L
ACC-060-SYS model will fit inside a 500mm standard kitchen base unit -
AccuBoost 120L
ACC-120-SYS/TNK models will fit inside a 500mm larder style kitchen unit -
AccuBoost 180L
ACC-180-SYS/TNK models will fit inside a 600mm larder style kitchen unit* -
AccuBoost 300L
ACC-300-SYS/TNK models will fit inside a 600mm larder style kitchen unit* -
AccuBoost 450L
DIMENSIONS
| ACC-060-SYS| ACC-120-SYS/TNK| ACC-180-SYS/TNK| ACC-300-SYS/TNK| ACC-450-
SYS| ACC-450- TNK
---|---|---|---|---|---|---
Length (mm)| 480| 480| 557| 557| 651| 621
Width (mm)| 457| 457| 557| 557| 635| 621
Height (mm)| 675| 1126| 1081| 1633| 1863| 1863
Salamander Pumps’ AccuBoost models have been designed so that there is the option to fit them inside standard kitchen units, with exception of the 450L model.