nVent HF1326414 Side Mount Filter Fan Owner’s Manual
- June 27, 2024
- nVent
Table of Contents
nVent HF1326414 Side Mount Filter Fan
Product Specifications
- Brand: HOFFMAN
- Model: HF13 SIDE-MOUNT FILTER FAN
- Voltage: 230V
- Airflow Capacity: 395 CFM
- Color: Light Gray
- Catalog Number: HF1326414
HF Side-Mount Filter Fans quickly install into enclosures with a click-fit design; no tools or screws required. Grilles open with the flick of a finger for easy filter replacement.
Product Usage Instructions
- Follow the manufacturer’s instructions provided with the product. Ensure that the enclosure is suitable for side-mount installation and that there is adequate space for the fan.
- To replace the filter, simply open the grilles by gently pushing them with your finger. Remove the old filter and replace it with a new one of the appropriate size and type recommended by the manufacturer.
- Regularly check the filter fan for any dust or debris accumulation. Clean the fan and filter as needed to ensure optimal airflow and cooling efficiency.
- Ensure the power is disconnected before performing any maintenance or installation tasks. Follow all safety guidelines provided in the product manual to prevent accidents or injuries.
FAQ
- Q: Can I use this filter fan for outdoor enclosures?
- A: It is recommended to use the HF13 SIDE-MOUNT FILTER FAN for indoor enclosures only to protect it from outdoor elements.
- Q: How often should I replace the filter?
- A: The frequency of filter replacement depends on the operating environment. Check the filter regularly and replace it when it appears dirty or clogged to maintain optimal performance.
- Q: Is it possible to adjust the fan speed?
- A: The fan speed of the HF13 SIDE-MOUNT FILTER FAN is typically set and cannot be adjusted manually. It operates at a constant speed for efficient airflow.
CATALOG NUMBER
- HF1326414
- HF Side-Mount Filter Fans quickly install into the enclosure with a click-fit design; no tools or screws are required. Grilles open with the flick of a finger for easy filter replacement.
FEATURES
- Click-Fit design quickly installs into enclosure wall; no tools or screws required
- Opens with the flick of a finger for easy filter replacement
- Enclosure side wall mounting
- Reverse airflow option on HF13 models available to push/pull air through higher static pressure
- Standard rope gasket provides a proper seal to the enclosure
- Similar cut-out sizes as other filter fan manufacturers
- Terminal block connections
- Optional thermostat available to save energy and extend service life
- The hinged grille remains attached after opening
- Size ranges from 4 inches (102 mm) to 13 inches (325 mm)
- Free airflow from 21 CFM (36 m3/hr.) to 484 CFM (822 m3/hr.)
- Service life hours from 40,000 to 100,000 hours
- Operating temperature range of -4 F/-20 C to 149 F/65 C
PRODUCT ATTRIBUTES
- Article Number: 34212
- Height: 12.8 in
- Width: 12.82 in
- Depth: 6.36 in
- Airflow: 395 ft³/min
- Nominal Voltage: 230 V
- Voltage AC: 200 V
- Max Current: 0.37 A
- Operating Temperature: 14 – 131 °F
- Material: Plastic
- Finish: Smooth Matte
- Color: Light Gray
- Color Code: RAL 7035
- Weight: 9.3 lb
WARNING
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
- Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. nVent.com
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Loading......