nVent P2BP1168 Proline Plinth Bases Owner’s Manual
- June 27, 2024
- nVent
Table of Contents
nVent P2BP1168 Proline Plinth Bases
Product Information
- The ProLine G2 Plinth Bases are designed to be installed under an enclosure to create space for cables to enter from below.
- They are made of mild steel with a powder-coated finish in a jet-black color.
- The plinth bases have a width of 62.95 inches, a depth of 30.07 inches, and a height of 3.94 inches.
- Each base is 100mm thick and weighs 22 lb.
Product Usage Instructions
Installation
- Ensure the area under the enclosure is clean and free from obstructions.
- Place the ProLine G2 Plinth Bases in position under the enclosure, aligning them properly.
- Secure the bases in place using appropriate fasteners or mounting hardware.
Cable Management
- Route cables through the space provided by the plinth bases to maintain a tidy and organized setup.
Maintenance
- Regularly inspect the plinth bases for any signs of damage or wear.
- Clean them using a damp cloth if necessary, avoiding abrasive cleaners that may damage the powder-coated finish.
FAQ
- Q: Can the ProLine G2 Plinth Bases be used outdoors?
- A: These plinth bases are designed for indoor use only and are not suitable for outdoor environments due to their construction and finish.
- Q: What is the maximum weight capacity of the plinth bases?
- A: The plinth bases have a weight capacity of 22 lb, ensuring they can support the intended equipment and cabling without issues.
CATALOG NUMBER
- P2BP1168
- ProLine G2 Plinth Bases are installed under an enclosure to provide space for cables to enter from below.
FEATURES
- Four access panels for cable management options at the base of the enclosure
- Sturdy cast aluminum corner supports for superior performance under load
- Corner blocks can be installed onto the base of the frame independent of the cover plates, enabling the cover plates to be attached after integration and just before shipment
- Stackable up to 400mm in height using Plinth Base Stacking Kit (not included) 100 mm or 200 mm options
- To maintain a NEMA Type 12 environmental rating, a gland plate must also be used in the base of the enclosure
- Installation hardware included
PRODUCT ATTRIBUTES
- Article Number: 31082
- Height: 3.94 in
- Width: 62.95 in
- Depth: 30.07 in
- Material: Mild Steel
- Finish: Powder Coated
- Color: Jet Black
- Color Code: RAL 9005
- Thickness: 16 ga
- Type: 100mm
- Weight: 22 lb
WARNING
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. nVent.com
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>