nVent P2BP145 Proline Plinth Bases Owner’s Manual
- June 27, 2024
- nVent
Table of Contents
nVent P2BP145 Proline Plinth Bases
Product Information
The ProLine G2 Plinth Bases are designed to be installed under an enclosure to provide space for cables to enter from below. Made of Mild Steel with a powder-coated finish, the bases are sturdy and durable, with dimensions of Height: 3.94 in, Width: 15.71 in, and Depth: 18.27 in. They come in a sleek Jet Black color with a color code of RAL 9005. The bases have a thickness of 16 ga and a weight of 12 lb, making them suitable for supporting enclosures.
Product Usage Instructions
- Installation: Ensure the ProLine G2 Plinth Bases are compatible with your enclosure size (fits 400x500mm).
- Place the bases under the enclosure to create a space for cable entry from below.
- Safety Precautions: Follow nVent’s product instruction sheets and training materials for proper installation.
- Improper installation may lead to malfunction, property damage, or bodily injury.
- Maintenance: Regularly inspect the bases for any signs of damage or wear. Clean them with a damp cloth if needed to maintain their appearance.
FAQ
Q: Can the ProLine G2 Plinth Bases support heavy enclosures?
A: Yes, the bases are made of sturdy Mild Steel and are designed to support enclosures effectively.
Q: How do I know if these bases are compatible with my enclosure?
A: The bases are designed to fit enclosures with dimensions of 400x500mm. Ensure your enclosure falls within these measurements for compatibility.
Q: Are there any specific maintenance requirements for the bases?
A: Regularly inspect the bases for damage and clean them with a damp cloth as needed to keep them in good condition.
ProLine G2 Plinth Bases are installed under an enclosure to provide space for cables to enter from below.
FEATURES
- Four access panels for cable management options at the base of the enclosure
- Sturdy cast aluminum corner supports for superior performance under load
- Corner blocks can be installed onto the base of the frame independent of the cover plates, enabling the cover plates to be attached after integration and just before shipment
- Stackable up to 400mm in height using Plinth Base Stacking Kit (not included) 100 mm or 200 mm options
- To maintain a NEMA Type 12 environmental rating, a gland plate must also be used in the base of the enclosure
- Installation hardware included.
PRODUCT ATTRIBUTES
- Article Number: 31086
- Height: 3.94 in
- Width: 15.71 in
- Depth: 18.27 in
- Material: Mild Steel
- Finish: Powder Coated
- Color: Jet Black
- Color Code: RAL 9005
- Thickness: 16 ga
- Type: 100mm
- Weight: 12 lb
WARNING
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
- Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
Our powerful portfolio of brands:
- nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
- © 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates.
- All other trademarks are the property of their respective owners.
- nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent