Blueair Blue 3610 Room Air Purifier User Manual
- June 28, 2024
- Blueair
Table of Contents
Blueair Blue 3610 Room Air Purifier
Specifications
- Model: Blue 3610
- Power Supply: 100VAC 50/60Hz
- Power Consumption: 4-38W
- Noise Level: 23-56 dB(A)
- CADR (Clean Air Delivery Rate): 51 m3
- CADR Levels:
- 353 cfm (600 m3/h)
- 347 cfm (590 m3/h)
- 380 cfm (650 m3/h)
- Standards: GB/T18801, GB4214.1, ANSI/AHAM AC-1-2019
Product Usage Instructions
Setup:
- Ensure the device is connected to a 100V power supply.
- Place the Blue 3610 at least 10cm away from any obstruction for optimal performance.
- Make sure the device is on a stable surface.
Operation:
- Press the power button to turn on the device.
- Adjust the settings using the LED display for desired air purification levels.
- Refer to the user manual for specific information on different modes and features.
Safety Precautions
This product is designed for indoor use only. While it is designed with safety in mind, improper handling can lead to accidents. Please follow the safety precautions below to use the product safely.
Symbols
- Indication: Perform this action.
- Prohibition: Do not perform this action.
Warnings
- Always follow the safety warnings. Failure to do so may result in fire, electric shock, or death.
- If smoke, strange smells, or other abnormalities occur, stop using the unit immediately and unplug it. Contact Blueair Service Center.
- Regularly remove dust from the plug and outlet to prevent fire hazards.
- Always hold the plug when unplugging to avoid electric shock or fire.
- Use only 100V outlets. Using the wrong voltage can cause fire or electric shock.
Prohibitions
- Do not allow children to play with the product.
- Do not use the product in wet or humid places.
- Do not disassemble or modify the product.
- Do not use the product with wet hands.
- Do not use the power cord for anything other than its intended purpose.
- Do not place the unit in direct sunlight or near heat sources.
- Do not use the unit without a filter.
Usage Precautions
- Replace the filter when the filter replacement indicator lamp lights up.
- Use only genuine Blueair filters.
- Do not use the unit in direct sunlight or near heat sources.
- Do not use the unit with the filter removed.
- Keep windows and doors closed while using the unit.
First Time Use
Step 1
Insert the power cord plug into an outlet.
Step 2
Press the operation button on the top of the unit to turn on the power. The operation button will cycle through the different speed settings each time it is pressed.
Power On/Off and Fan Speed Adjustment
The operating speed has four levels: Auto, Low, Medium, and High.
The LED on the operation button will light up for 5 seconds to indicate the selected mode. Pressing the operation button again will cycle through the power on/off and speed settings.
Auto Start Function
The unit has an auto start function that will resume operation at the last set speed if power is restored after an outage.
Auto Mode
The unit will automatically adjust the operating speed based on the detected air quality.
Operation Modes
- On/Auto Mode: Press the operation button once to turn on the unit and activate auto mode.
- Low Speed (Night Mode): Press the operation button twice to activate low speed (night mode). The LED will turn off.
- Medium Speed (Normal Mode): Press the operation button three times to activate medium speed (normal mode).
- High Speed (Boost Mode): Press the operation button four times to activate high speed (boost mode).
- Off: Press the operation button five times to turn off the unit.
Frequently Asked Questions
What is the recommended distance to place the Blue 3610 from walls or furniture?
It is recommended to place the Blue 3610 at least 10cm away from any obstruction for optimal performance.
How do I know when to replace the filters?
The device will indicate when it's time to replace the filters. Refer to the user manual for guidance on filter replacement.
What should I do if the unit emits smoke or a strange smell?
Stop using the unit immediately, unplug it, and contact Blueair Service Center.
How often should I replace the filter?
Replace the filter when the filter replacement indicator lamp lights up.
Can I use the unit without a filter?
No, using the unit without a filter will result in poor performance and may cause damage.
Can I use the unit in a humid environment?
No, using the unit in a humid environment can cause electric shock or fire.
What should I do if the power cord is damaged?
Do not use the unit if the power cord is damaged. Contact Blueair Service Center for assistance.
For more information, visit the official Blueair website: http://www.blueair.jp