DONGGUAN CLC-FXDWQ-000 Lenncare Tag User Manual
- June 27, 2024
- Dongguan
Table of Contents
DONGGUAN CLC-FXDWQ-000 Lenncare Tag
Specifications:
- Compatible with iOS, iPadOS, macOS, and Apple Watch
- Function Button for power on/off and interactions
- Find My app integration for tracking
Product Usage Instructions
Getting Started
-
Power On / Off:
Press the Lenncare Tag Function Button once to turn it on. It should beep once to indicate that it is powered on. To power off, hold the same button for at least three seconds. You will hear two beeps to indicate that your Lenncare Tag is powered off. -
Check For Updates:
To use the Apple Find My app to locate this item, ensure you have the latest version of iOS, iPadOS, or macOS. The Find Items app on Apple Watch requires the latest version of watchOS.
Add Your Lenncare Tag
Start The App:
Open Find My app on your supported iPhone.
Connect Your Lenncare Tag:
Press the function button once to power on your Lenncare Tag.
- Tap +, then Add Other Item.
- Once located, tap connect.
- Enter a name and choose an emoji for your Lenncare Tag and tap Continue.
- Find My will ask for confirmation to add your Lenncare Tag to your Apple ID. Tap Agree.
- Tap Finish, and your Lenncare Tag will be set up and ready to be used.
Locate Your Lenncare Tag
Find Lenncare Tag When It’s Nearby:
- Open Find My app or Find Items app on Apple Watch.
- Tap on your Lenncare Tag from the list.
- Tap Play Sound to locate your Lenncare Tag.
- Tap Stop Sound to stop the beeps once found.
Find Lenncare Tag’s Location:
Open Find My app and select the “Items” tab or open the Find ltems app on
your Apple Watch.Tap on your Lenncare Tag from the list. Your Lenncare Tag’s
location will appear on the Map with a time stamp of when the iterm was
located. To navigate to the Lenncare Tag’s location, tap “Directions” to open
Apple Maps .
Notifications
Enabling Notify When Left Behind:
Open Find My app and select the “Items” tab or open the Find ltems app on
your Apple Watch. Tap on your Lenncare Tag from the list. Under
“Notifications” enable the “Notify When Left Behind” toggle. You will receive
a notification when you leave your Lenncare Tag behind and it’s no longer in
range of your device.
Enabling Notify When Found:
Under “Notifications”, enable the “Notify When Found” toggle. When your
Lenncare Tag is seen by another Find My network device, you will receive a
notification of its location.
Note :” Notify When Found” can only be activated when your Lenncare Tag is out of range.
When Your Lenncare Tag Is Lost
Enabling Lost Mode:
Activate Lost Mode to track your lost Lenncare Tag. Open Find My app and select the “Items” tab or open the Find ltems app on your Apple Watch. Tap on your Lenncare Tag from the list. Under “Lost Mode” tap “Enable” A screen detailing Lost Mode will pop up, tap “Continue” Enter your phone number or email address and tap “Next”. You may enter a message that will be shared with the person that finds your item.
Tap “Activate” to enable “Lost Mode”
Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
Note: When” Lost Mode” is enabled, your Lenncare Tag is locked and cannot be paired to a new device.
Resetting Lenncare Tag
Remove The Lenncare Tag From Find My App:
Open Find My app and select the “Items” tab. Tap on your Lenncare Tag from
the list. please ensure “Lost Mode” is disabled. Scroll to the bottom of the
screen and tap “Remove ltem”. A summary will open, tap “Remove” to confirm.
Factory Reset Your Lenncare Tag:
After successfully removing the Lenncare Tag from Find My app, press the
Lenncare Tag’s function button four times rapidly and then hold it a fifth
time until you hear a ringing chime. The Lenncare Tag is now reset and ready
to be paired to a new Apple ID.
Extras
Unwanted tracking:
If any Find My network accessory separated from its owner is seen moving with
you over time, you’ll be notified in one of two ways:
- lf you have an iPhone, iPad, Find My will send a notification to your Apple device.This feature is available on iOS or iPadOS 14.5 or later.
- lf you don’t have an ios device or a smartphone, a Find Mynetwork accessory that isn’t with its owner for a period of time will emit a sound when it’s moved. These features were created specifically to discourage people from trying to track you without your knowledge.
CAUTlON:
Risk of fire or explosion if the battery is replaced by an incorrect type or
similar text.”Do not ingest battery, Chemical Burn Hazard. Keep new and used
batteries away from children. lf the battery compartment does not close
securely, stop using the product and keep it away from children. f you think a
batery might have been swallowed or placed inside any part of the body, seek
immediate medical attention.” or equivalent wording.
The Fine Print
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.
Such modifications or changes not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure conditions without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.
About Apple Find My
The Apple Find My network provides an easy, secure way to locate compatible personal items on a map using the Find My app on your iPhone, iPad, or Mac. Simply pair your compatible product with the Apple Find My app to view it right alongside your Apple devices. If your item ever goes missing, you can put it in Lost Mode to display a message and contact information to anyone who might find it. The Find My network is encrypted and anonymous, so no one else, not even Apple or the maker of your personal item, can view its location. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Watch, iPad, iPadOS, Mac, and macOS are the trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
FCC Supplier’s Declaration of Conformity
- Product Name: Lenncare Tag
- Model number: CLC-FXDWQ-000、CLC-FXDWQ-001、 CLC-FXDWQ-002、CLC-FXDWQ-003、CLC-FXDWQ-004、 CLC-FXDWQ-005、CLC-FXDWQ-006、CLC-FXDWQ-007、 CLC-FXDWQ-008、CLC-FXDWQ-009、CLC-FXDWQ-010、 CLC-FXDWQ-011、CLC-FXDWQ-012
- Suppliers Name: UA INTERNATIONAL INC.
- Suppliers Address (USA): 5030 Boardwalk Dr Suite 818 Colorado Springs, CO 80919 United States
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FAQ
Q: How do I know if my Lenncare Tag is successfully connected?
A: Once you have completed the setup process, you will receive a confirmation
message on the Find My app indicating successful connection.
Q: Can I track multiple Lenncare Tags with the same Apple ID?
A: Yes, you can add and track multiple Lenncare Tags using the same Apple
ID within the Find My app.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>