ZOSI C302 IPC Camera User Guide
- June 27, 2024
- ZOSI
Table of Contents
ZOSI C302 IPC Camera
For more information, please
- visit https://www.zositech.com
- Support Email: service@zositech.com
What’s in the Box
NOTE: The number of accessories varies with the camera model you purchased
Camera Structure Diagram
Connection Diagram
- Connect the camera and NVR to the power supply.
- After the device is powered on, the NVR will automatically search and pair with the camera, and the camera feed will be displayed.
NOTE: If you have purchased a new camera, it needs to be paired before it can be added to the system. For detailed pairing operations, please refer to the following link:
Install the Camera
Installation Precautions
- Avoid directing the camera towards strong light or reflective objects, including sunlight, lights, glass, mirrors and other areas with strong refraction of light sources.
- Do not install at location with objects covering or obscuring the camera.
- Avoid mounting the camera in places where too dim, and point the camera towards a well-lit area. For better image quality, make sure the camera and the captured subject \are at the same lighting conditions.
- For better image quality, it is recommended to clean the lens with a soft cloth from time to time.
- Do not expose the power port to water or moisture, or blocked by dirt or other things.
- Do not install the camera where rain and snow may hit the lens directly.
- Camera may work in extremely cold conditions as low as -10°C because it will produce heat when powered on. You may power the camera indoors for a few minutes before installing it outdoors (Only for outdoor cameras)
Mount the Camera to the Wall
NOTE: Please test each camera before installation, and then follow the corresponding instructions to install the camera.
NOTE: Dome camera and bullet camera are installed in the same way, the following is the example of the bullet camera. Please refer to the actual product and install the camera according to the corresponding instructions
Diagram of Wall-mounted/Ceiling Installation
-
Drill holes according to the mounting template, and insert the anchors into the holes.
-
Align the camera bracket with the indicated location, and screw the camera to the wall.
NOTE: Run the cable through the cable notch on the bracket. -
Loosen the adjustment knob of the bracket, rotate and adjust the camera to a proper angle.
-
Tighten the adjustment knob of the bracket to lock the camera.
Installation Distance, Height and Angle
- Distance: Best accuracy for objects within 5-50 ft (1.5-15 m).
- Angle: Tilt the camera down about 30°-60°from the horizontal position.
- Height: Install the camera 8-16 ft (2.5-5m) above the ground.
NOTE: The accuracy of human detection will be affected by various factors, such as the distance between the person and the camera, the height of the person, the height and angle of the camera, etc. The accuracy and distance of detection will also be affected in the night vision environment.
FAQ
- Q: Does the camera support motion detection and image capture?
- A: It captures images automatically when people, are detected or when there is a change in detected images. Users can also manually capture images using our ZOSI Smart APP.
- Q: The Wireless Connection of the Camera is Not Working during Pre-installation Testing?
- A: Please try resetting the camera and connecting it to the NVR with an Ethernet cable\ before adding it.
- Q: The Camera is Not Powered On?
- A: If the camera still cannot be powered on after changing the power supply, please check if the camera’s infrared lights are lit. If the infrared lights are not lit, the camera may be damaged and needs to be returned or exchanged.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including the inference that. may cause undesired operation.
Simplified EU Declaration of Conformity
ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/53/EU.
Correct Disposal of this Product
This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.
Contact
- www.zositech.com
- Support Email: service@zositech.com
- Facebook: https://www.facebook.com/ZosiTechnology/
- Whatsapp: +1-866-841-6932
- UK Whatsapp: +86 18675610962
Copyright © 2023 ZOSI Technology Co., Ltd. No part of this publication may be reproduced in any way without the written permission of ZOSI. The information in this publication is believed to be accurate in all respects. ZOSI assumes no responsibility for any consequences resulting from their use. As our products require continuous improvement,ZOSI reserves the right to modify product designs, specifications and prices without notice and without any obligation. All rights reserved,and ZOSI reserves the final interpretation right of this manual