HOTONE V01 240605 Ampero Momentary Dual Footswitch Pedal User Guide
- June 25, 2024
- HOTONE
Table of Contents
HOTONE V01 240605 Ampero Momentary Dual Footswitch Pedal
Preface
This operating guide is for how to set theAmpero Switch+ on Ampero II Stomp or Ampero II Stage. On both units, Ampero Switch+ is connected and set in the same way, so the following steps will take Ampero II Stomp as an example. If you want to set the Ampero Switch+ to control another device, please refer to the related contents of your device manual.
How to Connect
- Connect one end of the TRS jack to Ampero Switch+ and the other end to the EXP/CTRL(FS 4/5) jack of Ampero II Stomp with the provided TRS cable.
How to setup
- In the main menu, click “GLOBAL” and then “EXP2/FS”. Set “MODE” to “Dual FS” in the selection panel.
- “FS4 TAP” and “FSS TAP” in the selection panel will become editable The default is set to bank-/+.
- “FS4 TAP” corresponds to Ampere Switch Footswitch A and “FSS TAP” corresponds to Ampere Switch Footswitch B.
They can be set up as follows:
SPECIFICATIONS
- Looper Rec/Play: Record/play Loop phrases
- Looper Stop: Stops Looper playback
- Looper: Enter/exit Looper menu
- Drum On/Off: Drum rhythm play/stop
- Drum: Enter/exit drum menu
- Tuner: Enter/exit tuner
- Bank+/-: Change banks by toggling up or down
- Tap Tempo: Tap tempo function
- Patch+/-: Change patches by toggling up or down
- EXP On/Off: Switching built-in expression pedal on/off
- FX1, FX2, AMP, NR, CAB, EQ, FX3, DLV, RVB On/Off: Turn on/off each effect block
Plus
- When set EXP/CTRL FUNC to Single FS, the FS4 TAP defaults to Tap Tempo;
- When set EXP/CTRL FUNC to Dual FS, the FS4 TAP defaults to Bank- and FSS TAP defaults to Bank+.
In the interest of product improvement, the specifications and/or the content of products (including but not limited to appearances, packaging design, manual content, accessories, size, parameters, and display screen), are subject to change without prior notice. Please check with the local supplier for exact offers. Specifications and features (including but not limited to appearances, colors, and size) may vary by model owing to environmental factors, and all images are illustrative.