XRocker XVMTL20BT-B 2.0 Bluetooth Speaker with Battery User Guide
- June 24, 2024
- XRocker
Table of Contents
XRocker XVMTL20BT-B 2.0 Bluetooth Speaker with Battery
Product Information
- Weight: 1.8 lbs
- Power: 9449W
Product Usage Instructions
Power On/Off
To power on the product, press the power button located on the front panel. To
power off, press and hold the same button for 3 seconds.
Setting Up
Place the product on a flat and stable surface. Connect the necessary cables
as outlined in the user manual. Ensure proper ventilation around the product.
FAQ
Q: How do I reset the product to factory settings?
A: To reset the product to factory settings, navigate to the settings menu and
select the reset option. Confirm the action to restore the product to its
original settings.
2.0BLUETOOTH with Battery
Missing Parts? Contact X Rocke r
Support: WWW.XROCKERGAMING.COM
WWW.XROCKERGAMING.COM/PAGES/SUPPORT
WWW.XROCKERUK.COM
WWW.XROCKERUK.COM/PAGES/SUPPORT
-
Power on/off
Long press this to power on or power off your gaming chair; Short press to disconnect the Bluetooth connection -
Power Input
Plug your power supply into this socket, Can directly power the audio/charge the battery
BLUETOOTH CONNECTION
Open the Power on button- On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already, and search for XROCKER. Upon finding this, select the X ROCKER option.If a passcode is required the four-digit code will be ‘0000*.
Attention!
separate minimum USB 2.0 5V / 2A supply is required, The USB must be connected
to a USB plug, laptop or games console.
NOTE: Please ensure that the maximum voltage output of your power device is
5V.Care must be taken when plugging the connection into your chair to avoid
damaging the socket.
TROUBLESHOOTING
TIPS NO POWER GOING TO THE CONTROL PANEL
- Make sure the power cable is connected correctly. Make sure that the power source is working correctly.
- With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any light flickers (or not) please contact the support
NO SOUND
- Connect a mobile phone to the X Rocker using the phone connection guidelines in the manual to test the chair for sound. Confirm that the device/system is correctly configured as per the previous connection guide.
- Make sure that you indeed have a headphone socket on your TV. This will typically be marked with a headphone symbol or “H/P OUT”.
STEREO SPEAKERS DO NOT PRODUCT SOUND/SOUND IS FAINT
- Please make sure the volume of the source device is at a higher level to strengthen the audio signal.
THE CABLES CONNECTED TO MY X ROCKER HAVE BEEN BROKEN ACCIDENTALLY
- Please contact X Rocker Support regarding this issue.
DON’T HAVE A HEADPHONE SOCKET ON YOUR TV?
- You may need to purchase a TOSlink adapter. If you are unsure as to which to purchase, please contact X Rocker support regarding this issue.
NEED ADDITIONAL ASSISTANCE? CONTACT X ROCKER SUPPORT:
WWW.XROCKERGAMING.COM
XROCKERGAMING.COM/PAGES/SUPPORT
UK WWW.XROCKERUK.COM
XROCKERUK.COM/PAGES/SUPPORT
HEALTH AND SAFETY INFORMATION
- Make sure to meug the Rocker ower sup from the in leke before enables and power supplies are handled by a dult to ensure safe and correct usage
- Avoid direct contact with liquids. To clean, wipe with a damp cloth. If a spillage occurs, switch off the X Rocker and wait for the product to dry before reusing.
- Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the X Rocker surface material.
- Please consult X Rocker Support before unscrewing and disassembling any of the electrical components or undertaking any changes to the chair. If any unauthorized modifications or repairs are made before consultation, then this will void your warranty.
- To reduce potential trip hazards or entanglement hazards, arrange and secure any cables so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area.
- Please be careful when rotating and swiveling the X Rocker when in use. Cables and wires may be pulled or damaged in the process and cause damage to the X Rocker control panel or
- If any of the cables or electrical equipment becomes damaged in any way, stop using it immediately and contact X Rocker for more details on how to replace the component.
- Do not stand on the chair at any time or exceed the 120kg weight limit via other means.
- Do not lean back on the chair or force the chair to the point in which the pedestal would lift off the ground as this will potentially cause damage to the product or injury to the user.
- X Rocker armrests are designed for support and comfort during gameplay, please do not stand or sit on the arms directly. Do not apply weight to the armrests when leaving the chair to ensure long-term durability.
- Do not use the X Rocker speakers at high volume for any extended period. To avoid hearing damage, use your speaker at a comfortable, moderate volume level. Parents, please monitor your child’s usage to avoid long-term hearing loss or discomfort.
- When not in use, keep cables and power supplies out of reach of children, please also ensure that these are not subject to harsh impacts such as dropping or throwing the components.
- Never place any type of candle or naked flame on or near the X Rocker at any time. While X Rocker products are compliant with UK and European fire safety regulations, prolonged exposure to naked flames will result in damage to the product and other safety hazards.
POWER SUPPLY SAFETY INFORMATION
ATTENTION
- To reduce the risk of fire, electric shock or product damage, do not expose the X Rocker power supply to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed near the power supply. If you spill any liquid into the power supply, it can cause serious damage. Switch it off at the mains immediately. Withdraw the power supply and consult your dealer.
- Always disconnect the power supply from the mains before connecting/disconnecting other devices or moving the X Rocker.
- Only use the supplied cables, power supplies, and accessories specified by and manufactured by X Rocker.
- Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires.
- Avoid exposure to direct sunlight and other sources of heat.
- Ensure that cables and power supplies are kept in a safe location, out of the reach of children to avoid any potential hazards that include; dropping, throwing, tripping over, cutting, etc. If you encounter any visible notches or cuts in the power supply or other cables, avoid using the product and contact X Rocker Support for more assistance.
Input: AC 100-240V ~ 50/60Hz 0.5A Output: DC 5V/2.0A
FCC RADIATION EXPOSURE STATEMENT/IC RADIATION EXPOSURE STATEMENT
Caution :
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the sure designed to provide reasonable protection against harmful interference in resident in relations. Tits Quent generates. Use and can fates, this frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions
- this device may not cause interference, and
- this device must accent any interference including interference that may cause undesired operation of the device
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for
uncontrolled environments. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Unique Identifier
Trade Name: X Rocker Chair Model No.:TL20BT-B FCC ID: XVMTL20BT-B Responsible
Party – U.S. Contact Information Ace Bayou Corp.
Telephone: 952-345-3084 Address: 1000
Superior Blvd, Suite 309, Wayzata, MN 55391 FCC Compliance Statement This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
References
- X Rocker Gaming | Gaming Furniture Built For All Gamers
- X Rocker Gaming | Gaming Furniture Built For All Gamers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>