XRocker 2.0 Bluetooth with Battery User Guide
- June 7, 2024
- XRocker
Table of Contents
- 2.0 BLUETOOTH
- WELCOME TO X ROCKER!
- B
- + B1 + B2
- + B3 + B4
- + B5
- Control panel overview
- WIRED CONNECTION GUIDE: TV (ALL CONSOLES)
- CONNECT BY CONTROLLER (PS4 systems only)
- BLUETOOTH CONNECTION GUIDE
- TROUBLESHOOTING TIPS
- HEALTH AND SAFETY INFORMATION
- TROUBLESHOOTING TIPS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
2.0 BLUETOOTH
with battery
Need Help?
Email:[email protected]
Phone:866-969-2603
www.xrockergaming.com
IMPORTANT: You must keep your original retail receipt as proof of purchase.
1
WELCOME TO X ROCKER!
Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favorite games with glorious audio!
To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!
3
B
+ B1 + B2
+ B3 + B4
+ B5
B1 - USB Power Supply Adapter
B2 - 2m 3.5mm to 3.5mm audio cable
B3 - 15cm RCA to 3.5mm (F) audio cable
B4 - RCA female to female adapters
B5 - USB Power Cable
Control panel overview
4
WIRED CONNECTION GUIDE: TV (ALL CONSOLES)
- Connect B2 Cable to X Rocker control panel 3.5mm INPUT socket
- Connect other end of the B2 cable to the TV headphone socket.
- Once connected to your TV, increase volume to 50% of the maximum for the best sound level. **
*N.B: If your TV does not feature a headphone socket then you may need to
purchase an additional TOSlink adapter to get connected directly to a console
for audio.
** Depending on your TV you may need to Increase the headphone volume
separately in the TV sound settings.
5
CONNECT BY CONTROLLER (PS4 systems only)
- Connect the B2 cable to the bottom of the PS4 controller via the headset socket.
- Connect the other end of the B2 cable to the chair via the green port.
- With the PS4 turned on and in the main menu, press and hold the black PS button until the quick menu appears.
- In this menu select [Adjust sound and devices]
- Then select [output to headphones]
- Change the setting from [Chat Only] to [All audio]
- Make sure the volume in the previous menu is set to the maximum.
6
BLUETOOTH CONNECTION GUIDE
Step 1:
On the Audio output device go into its Bluetooth settings, turn Bluetooth on
if it is not on already and search for XROCKER. Upon finding this, select
the XROCKER option. If a passcode is required the four digit code will be
‘ 0000 ‘.
7
TROUBLESHOOTING TIPS
| Issue | Troubleshooting steps |
|---|---|
| No power going to control panel | Make sure that the power cableis connected |
correctly.
• Make sure that the power supply at the power source is working correctly.
• With the chair turned to the ON position, give the power cable a slight
wiggle in the port. If any lightsflicker (or not) then please contact support
(details below).
No sound| • Connect a mobile phone to the X Rocker using the phone connection
guidelines in the manual to test the chair for sound.
• Confirm that the device/system is correctly configured as per previous
connection guide.
• Make sure that you indeed have a headphone socket on your TV. Thiswill
typically be marked with a headphone symbol or “H/P OUT”
Bluetooth mode cuts out during gameplay| • Please make sure that the volume of
the source device is at a higher level to strengthen the audio signal.
The cables connected to my X Rocker have been broken accidentally| • Please
contact X Rocker support regarding this issue.
8
HEALTH AND SAFETY INFORMATION
- Avoid immersing or allowing the X Rocker to come into contact with liquids.
- Please consult X Rocker Support before unscrewing any of the electrical components on the chair.
- Please be mindful of any cabling laid out between the X Rocker and power source/audio device.
- Please be mindful of cabling attached when moving/swivelling the X Rocker.
- If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely.
- Do not stand on the X Rocker or exceed the 250lb weight limit via other means.
- Do not lean back on the chair to the point in which the pedestal would lift off the ground.
- X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair.
- Playing audio for long periods at loud volumes may contribute to difficulties in hearing.
- Please be considerate to others when playing audio through the X Rocker speakers at higher volumes.
9
TROUBLESHOOTING TIPS
ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device,
the disconnect device shall remain readily operable;
C. Only use the attachments/accessories specified by manufacturer.
Power Supply unit trademark: BI
Model name: BI12T-050100-BdUU
Input: AC 100-240V~50/60Hz 0.5A
Output: DC 5V / 1A
10